도와주세요!!
제목과 같이 부팅이 중간에 멈춰버립니다.
최근에 zImage 랑 Ramdisk 를 Flash 에 다른걸로 저장했는데, 이런 현상이 벌어지네요
Kernel 컴파일 할 때 menuconfig 해서 module 에서 EZ-X5 지원 한다는 것도 봤는데...
Ramdisk 문제일까요? 지금 이 홈페이지에 있는 Ramdisk 이미지 파일 여러개 다운받아서 하나씩 넣어보고 있는데요
일단 부트 로그 써보겠습니다.
해결 부탁드려요 어제 오후부터 계속 고민하다가 이제야 조심스레 글을 써봅니다 ㅜㅜ
WELCOME EZBOOT V2.3.04 (FALINUX Co.,Ltd) ......PXA255(EZ-X5) (398MHz)
Program by You Young-chang, Oh Jae-Kyong, Jang Hyung-Gi
Last Modify Mar 3 2009
Detect ES29LV400_B Flash : vid=4A pid=22BA
SIZE 4-Mbits [512-Kbytes]
Detect Samsung NAND 64M 3.3V 8-bit Flash : vid=EC pid=76
SIZE 64-Mbytes (page=512, block=16K)
LCD setup 640x480
... not supported part_nr=2
clear lcd .....
Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar]...
Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel [MARCH 3002]...
kernel command [EZBOOT mem=32M initrd=0xA0800000,5M root=/dev/ram ramdisk=16384 console=ttyPXA2,115200 video=ezfb:panel:3 ip0=192.168.10.90 mac=00:FA:07:78:65:05 netmask=255.255.255.0 gw=192.168.10.254 host=192.168.10.100 nandparts=1,8,55 ]
Uncompressing Linux........................................................................................................... done, booting the kernel.
Linux version 2.6.21-falinux (root@chuck-VirtualBox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #4 Fri Feb 14 09:03:12 KST 2014
CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE), cr=0000397f
Machine: FALinux EZ-X5 Development Platform
Memory policy: ECC disabled, Data cache writeback
Memory clock: 99.53MHz (*27)
Run Mode clock: 398.13MHz (*4)
Turbo Mode clock: 398.13MHz (*1.0, inactive)
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists. Total pages: 8128
Kernel command line: EZBOOT mem=32M initrd=0xA0800000,5M root=/dev/ram ramdisk=16384 console=ttyPXA2,115200 video=ezfb:panel:3 ip0=192.168.10.90 mac=00:FA:07:78:65:05 netmask=255.255.255.0 gw=192.168.10.254 host=192.168.10.100 nandparts=1,8,55
PID hash table entries: 128 (order: 7, 512 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 32MB = 32MB total
Memory: 23904KB available (2948K code, 349K data, 124K init)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
SCSI subsystem initialized
Time: pxa_timer clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 5120K
NetWinder Floating Point Emulator V0.97 (double precision)
audit: initializing netlink socket (disabled)
audit(24.003:1): initialized
yaffs Feb 14 2014 09:00:31 Installing.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Panel panel:3 not supported!(default : 640x480)fb0: PXA frame buffer device ( 640x480x16 )
Start display and show logo
pxa2xx-uart.0: ttyPXA0 at MMIO 0x40100000 (irq = 15) is a FFUART
pxa2xx-uart.1: ttyPXA1 at MMIO 0x40200000 (irq = 14) is a BTUART
pxa2xx-uart.2: ttyPXA2 at MMIO 0x40700000 (irq = 13) is a STUART
pxa2xx-uart.3: ttyPXA3 at MMIO 0x41600000 (irq = 0) is a HWUART
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
eth0: cs8900 rev K found at 0xf1000300 [Cirrus EEPROM]
cs89x0 media RJ-45, IRQ 44, programmed I/O, MAC 00:fa:07:78:65:05
NAND device: Manufacturer ID:0xec, Chip ID:0x76 (Samsung NAND 64MiB 3,3V 8-bit)
Scanning device for bad blocks
count of bad blocks = 0
Creating 3 MTD partitions on "NAND 64MiB 3,3V 8-bit":
0x00000000-0x00100000 : "falinux boot/config/logo partition"
0x00100000-0x00900000 : "falinux kernel/ramdisk partition"
0x00900000-0x04000000 : "falinux yaffs partition"
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
I2C: i2c-0: PXA I2C adapter
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
NET: Registered protocol family 17
XScale DSP coprocessor detected.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 124K