마운트 시키면 아래 메세지 가 뜨네요..
jffs2: No clean _or_ dirty blocks to GC from! Where are they all?
jffs2: Couldn't find erase block to garbage collect!

하지만 마운트는 되고 .. 사용도 가능한데...
마운트한 디렉토리에서 새로운 파일을 생성하고 나면 reset이 안먹네요..
power off후 power on하면 정상동적하고.. 새로생긴 파일도 있는데..
kingseft wrote..
: 1. 커널 설정 다음과 같이 하구요 .config 파일 올립니다.
:
: #
: # Automatically generated by make menuconfig: don't edit
: #
: CONFIG_ARM=y
: # CONFIG_EISA is not set
: # CONFIG_SBUS is not set
: # CONFIG_MCA is not set
: CONFIG_UID16=y
: CONFIG_RWSEM_GENERIC_SPINLOCK=y
: # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
: # CONFIG_GENERIC_BUST_SPINLOCK is not set
: # CONFIG_GENERIC_ISA_DMA is not set
:
: #
: # Code maturity level options
: #
: CONFIG_EXPERIMENTAL=y
: # CONFIG_OBSOLETE is not set
:
: #
: # Loadable module support
: #
: CONFIG_MODULES=y
: # CONFIG_MODVERSIONS is not set
: # CONFIG_KMOD is not set
:
: #
: # System Type
: #
: # CONFIG_ARCH_ANAKIN is not set
: # CONFIG_ARCH_ARCA5K is not set
: # CONFIG_ARCH_CLPS7500 is not set
: # CONFIG_ARCH_CLPS711X is not set
: # CONFIG_ARCH_CO285 is not set
: # CONFIG_ARCH_EBSA110 is not set
: # CONFIG_ARCH_CAMELOT is not set
: # CONFIG_ARCH_FOOTBRIDGE is not set
: # CONFIG_ARCH_INTEGRATOR is not set
: # CONFIG_ARCH_L7200 is not set
: # CONFIG_ARCH_RPC is not set
: CONFIG_ARCH_SA1100=y
: # CONFIG_ARCH_SHARK is not set
:
: #
: # Archimedes/A5000 Implementations
: #
: # CONFIG_ARCH_ARC is not set
: # CONFIG_ARCH_A5K is not set
:
: #
: # Footbridge Implementations
: #
: # CONFIG_ARCH_CATS is not set
: # CONFIG_ARCH_PERSONAL_SERVER is not set
: # CONFIG_ARCH_EBSA285_ADDIN is not set
: # CONFIG_ARCH_EBSA285_HOST is not set
: # CONFIG_ARCH_NETWINDER is not set
:
: #
: # SA11x0 Implementations
: #
: # CONFIG_SA1100_ASSABET is not set
: # CONFIG_ASSABET_NEPONSET is not set
: # CONFIG_SA1100_ADSBITSY is not set
: # CONFIG_SA1100_BRUTUS is not set
: # CONFIG_SA1100_CERF is not set
: # CONFIG_SA1100_H3100 is not set
: # CONFIG_SA1100_H3600 is not set
: # CONFIG_SA1100_H3800 is not set
: # CONFIG_SA1100_H3XXX is not set
: # CONFIG_SA1100_EXTENEX1 is not set
: # CONFIG_SA1100_FLEXANET is not set
: # CONFIG_SA1100_FREEBIRD is not set
: # CONFIG_SA1100_GRAPHICSCLIENT is not set
: # CONFIG_SA1100_GRAPHICSMASTER is not set
: # CONFIG_SA1100_BADGE4 is not set
: # CONFIG_SA1100_JORNADA720 is not set
: # CONFIG_SA1100_HUW_WEBPANEL is not set
: # CONFIG_SA1100_ITSY is not set
: # CONFIG_SA1100_LART is not set
: # CONFIG_SA1100_NANOENGINE is not set
: # CONFIG_SA1100_OMNIMETER is not set
: # CONFIG_SA1100_PANGOLIN is not set
: # CONFIG_SA1100_PLEB is not set
: # CONFIG_SA1100_PT_SYSTEM3 is not set
: # CONFIG_SA1100_SHANNON is not set
: # CONFIG_SA1100_SHERMAN is not set
: # CONFIG_SA1100_SIMPAD is not set
: # CONFIG_SA1100_PFS168 is not set
: # CONFIG_SA1100_VICTOR is not set
: # CONFIG_SA1100_XP860 is not set
: # CONFIG_SA1100_YOPY is not set
: CONFIG_SA1100_EZBOARD=y
: CONFIG_SA1100_USB=y
: CONFIG_SA1100_USB_NETLINK=y
: CONFIG_SA1100_USB_CHAR=y
: # CONFIG_H3600_SLEEVE is not set
:
: #
: # CLPS711X/EP721X Implementations
: #
: # CONFIG_ARCH_AUTCPU12 is not set
: # CONFIG_ARCH_CDB89712 is not set
: # CONFIG_ARCH_CLEP7312 is not set
: # CONFIG_ARCH_EDB7211 is not set
: # CONFIG_ARCH_P720T is not set
: # CONFIG_ARCH_FORTUNET is not set
: # CONFIG_ARCH_EP7211 is not set
: # CONFIG_ARCH_EP7212 is not set
: # CONFIG_ARCH_ACORN is not set
: # CONFIG_FOOTBRIDGE is not set
: # CONFIG_FOOTBRIDGE_HOST is not set
: # CONFIG_FOOTBRIDGE_ADDIN is not set
: CONFIG_CPU_32=y
: # CONFIG_CPU_26 is not set
: # CONFIG_CPU_32v3 is not set
: CONFIG_CPU_32v4=y
: # CONFIG_CPU_ARM610 is not set
: # CONFIG_CPU_ARM710 is not set
: # CONFIG_CPU_ARM720T is not set
: # CONFIG_CPU_ARM920T is not set
: # CONFIG_CPU_ARM922T is not set
: # CONFIG_CPU_ARM926T is not set
: # CONFIG_CPU_ARM1020 is not set
: # CONFIG_CPU_SA110 is not set
: CONFIG_CPU_SA1100=y
: # CONFIG_ARM_THUMB is not set
: CONFIG_DISCONTIGMEM=y
:
: #
: # General setup
: #
: # CONFIG_PCI is not set
: CONFIG_ISA=y
: # CONFIG_ISA_DMA is not set
: # CONFIG_CPU_FREQ is not set
: # CONFIG_HOTPLUG is not set
: # CONFIG_PCMCIA is not set
: CONFIG_NET=y
: CONFIG_SYSVIPC=y
: CONFIG_BSD_PROCESS_ACCT=y
: CONFIG_SYSCTL=y
: CONFIG_FPE_NWFPE=y
: # CONFIG_FPE_FASTFPE is not set
: CONFIG_KCORE_ELF=y
: # CONFIG_KCORE_AOUT is not set
: # CONFIG_BINFMT_AOUT is not set
: CONFIG_BINFMT_ELF=y
: # CONFIG_BINFMT_MISC is not set
: # CONFIG_PM is not set
: # CONFIG_ARTHUR is not set
: CONFIG_CMDLINE="keepinitrd"
: # CONFIG_LEDS is not set
: CONFIG_ALIGNMENT_TRAP=y
:
: #
: # Parallel port support
: #
: # CONFIG_PARPORT is not set
:
: #
: # Memory Technology Devices (MTD)
: #
: CONFIG_MTD=y
: # CONFIG_MTD_DEBUG is not set
: CONFIG_MTD_PARTITIONS=y
: # CONFIG_MTD_REDBOOT_PARTS is not set
: # CONFIG_MTD_BOOTLDR_PARTS is not set
: # CONFIG_MTD_AFS_PARTS is not set
: CONFIG_MTD_CHAR=y
: CONFIG_MTD_BLOCK=y
: # CONFIG_FTL is not set
: # CONFIG_NFTL is not set
:
: #
: # RAM/ROM/Flash chip drivers
: #
: CONFIG_MTD_CFI=y
: # CONFIG_MTD_JEDECPROBE is not set
: CONFIG_MTD_GEN_PROBE=y
: # CONFIG_MTD_CFI_ADV_OPTIONS is not set
: CONFIG_MTD_CFI_INTELEXT=y
: # CONFIG_MTD_CFI_AMDSTD is not set
: # CONFIG_MTD_RAM is not set
: CONFIG_MTD_ROM=y
: # CONFIG_MTD_ABSENT is not set
: # CONFIG_MTD_OBSOLETE_CHIPS is not set
: # CONFIG_MTD_AMDSTD is not set
: # CONFIG_MTD_SHARP is not set
: # CONFIG_MTD_JEDEC is not set
:
: #
: # Mapping drivers for chip access
: #
: # CONFIG_MTD_PHYSMAP is not set
: # CONFIG_MTD_NORA is not set
: # CONFIG_MTD_ARM_INTEGRATOR is not set
: # CONFIG_MTD_CDB89712 is not set
: CONFIG_MTD_SA1100=y
: # CONFIG_MTD_DC21285 is not set
: # CONFIG_MTD_IQ80310 is not set
: # CONFIG_MTD_PCI is not set
:
: #
: # Self-contained MTD device drivers
: #
: # CONFIG_MTD_PMC551 is not set
: # CONFIG_MTD_SLRAM is not set
: # CONFIG_MTD_MTDRAM is not set
: # CONFIG_MTD_BLKMTD is not set
: # CONFIG_MTD_DOC1000 is not set
: # CONFIG_MTD_DOC2000 is not set
: # CONFIG_MTD_DOC2001 is not set
: # CONFIG_MTD_DOCPROBE is not set
:
: #
: # NAND Flash Device Drivers
: #
: # CONFIG_MTD_NAND is not set
:
: #
: # Plug and Play configuration
: #
: # CONFIG_PNP is not set
: # CONFIG_ISAPNP is not set
:
: #
: # Block devices
: #
: # CONFIG_BLK_DEV_FD is not set
: # CONFIG_BLK_DEV_XD is not set
: # CONFIG_PARIDE is not set
: # CONFIG_BLK_CPQ_DA is not set
: # CONFIG_BLK_CPQ_CISS_DA is not set
: # CONFIG_BLK_DEV_DAC960 is not set
: # CONFIG_BLK_DEV_LOOP is not set
: # CONFIG_BLK_DEV_NBD is not set
: CONFIG_BLK_DEV_RAM=y
: CONFIG_BLK_DEV_RAM_SIZE=8192
: CONFIG_BLK_DEV_INITRD=y
:
: #
: # Multi-device support (RAID and LVM)
: #
: # CONFIG_MD is not set
: # CONFIG_BLK_DEV_MD is not set
: # CONFIG_MD_LINEAR is not set
: # CONFIG_MD_RAID0 is not set
: # CONFIG_MD_RAID1 is not set
: # CONFIG_MD_RAID5 is not set
: # CONFIG_MD_MULTIPATH is not set
: # CONFIG_BLK_DEV_LVM is not set
:
: #
: # Networking options
: #
: CONFIG_PACKET=y
: # CONFIG_PACKET_MMAP is not set
: # CONFIG_NETLINK_DEV is not set
: # CONFIG_NETFILTER is not set
: # CONFIG_FILTER is not set
: CONFIG_UNIX=y
: CONFIG_INET=y
: # CONFIG_IP_MULTICAST is not set
: # CONFIG_IP_ADVANCED_ROUTER is not set
: # CONFIG_IP_PNP is not set
: # CONFIG_NET_IPIP is not set
: # CONFIG_NET_IPGRE is not set
: # CONFIG_ARPD is not set
: # CONFIG_INET_ECN is not set
: # CONFIG_SYN_COOKIES is not set
: # CONFIG_IPV6 is not set
: # CONFIG_KHTTPD is not set
: # CONFIG_ATM is not set
: # CONFIG_VLAN_8021Q is not set
: # CONFIG_IPX is not set
: # CONFIG_ATALK is not set
: # CONFIG_DECNET is not set
: # CONFIG_BRIDGE is not set
: # CONFIG_X25 is not set
: # CONFIG_LAPB is not set
: # CONFIG_LLC is not set
: # CONFIG_NET_DIVERT is not set
: # CONFIG_ECONET is not set
: # CONFIG_WAN_ROUTER is not set
: # CONFIG_NET_FASTROUTE is not set
: # CONFIG_NET_HW_FLOWCONTROL is not set
:
: #
: # QoS and/or fair queueing
: #
: # CONFIG_NET_SCHED is not set
:
: #
: # Network device support
: #
: CONFIG_NETDEVICES=y
:
: #
: # ARCnet devices
: #
: # CONFIG_ARCNET is not set
: # CONFIG_DUMMY is not set
: # CONFIG_BONDING is not set
: # CONFIG_EQUALIZER is not set
: # CONFIG_TUN is not set
: # CONFIG_ETHERTAP is not set
:
: #
: # Ethernet (10 or 100Mbit)
: #
: CONFIG_NET_ETHERNET=y
: # CONFIG_ARM_AM79C961A is not set
: CONFIG_EZBOARD_CS8900A=y
: # CONFIG_SUNLANCE is not set
: # CONFIG_SUNBMAC is not set
: # CONFIG_SUNQE is not set
: # CONFIG_SUNLANCE is not set
: # CONFIG_SUNGEM is not set
: # CONFIG_NET_VENDOR_3COM is not set
: # CONFIG_LANCE is not set
: # CONFIG_NET_VENDOR_SMC is not set
: # CONFIG_NET_VENDOR_RACAL is not set
: # CONFIG_AT1700 is not set
: # CONFIG_DEPCA is not set
: # CONFIG_HP100 is not set
: # CONFIG_NET_ISA is not set
: # CONFIG_NET_PCI is not set
: # CONFIG_NET_POCKET is not set
:
: #
: # Ethernet (1000 Mbit)
: #
: # CONFIG_ACENIC is not set
: # CONFIG_DL2K is not set
: # CONFIG_MYRI_SBUS is not set
: # CONFIG_NS83820 is not set
: # CONFIG_HAMACHI is not set
: # CONFIG_YELLOWFIN is not set
: # CONFIG_SK98LIN is not set
: # CONFIG_FDDI is not set
: # CONFIG_HIPPI is not set
: # CONFIG_PLIP is not set
: # CONFIG_PPP is not set
: # CONFIG_SLIP is not set
:
: #
: # Wireless LAN (non-hamradio)
: #
: # CONFIG_NET_RADIO is not set
:
: #
: # Token Ring devices
: #
: # CONFIG_TR is not set
: # CONFIG_NET_FC is not set
: # CONFIG_RCPCI is not set
: # CONFIG_SHAPER is not set
:
: #
: # Wan interfaces
: #
: # CONFIG_WAN is not set
:
: #
: # Amateur Radio support
: #
: # CONFIG_HAMRADIO is not set
:
: #
: # IrDA (infrared) support
: #
: # CONFIG_IRDA is not set
:
: #
: # ATA/IDE/MFM/RLL support
: #
: CONFIG_IDE=y
:
: #
: # IDE, ATA and ATAPI Block devices
: #
: CONFIG_BLK_DEV_IDE=y
: # CONFIG_BLK_DEV_HD_IDE is not set
: # CONFIG_BLK_DEV_HD is not set
: CONFIG_BLK_DEV_IDEDISK=y
: # CONFIG_IDEDISK_MULTI_MODE is not set
: # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
: # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
: # CONFIG_BLK_DEV_IDEDISK_IBM is not set
: # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
: # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
: # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
: # CONFIG_BLK_DEV_IDEDISK_WD is not set
: # CONFIG_BLK_DEV_COMMERIAL is not set
: # CONFIG_BLK_DEV_TIVO is not set
: # CONFIG_BLK_DEV_IDECS is not set
: CONFIG_BLK_DEV_IDECD=y
: # CONFIG_BLK_DEV_IDETAPE is not set
: # CONFIG_BLK_DEV_IDEFLOPPY is not set
: # CONFIG_BLK_DEV_IDESCSI is not set
: # CONFIG_BLK_DEV_CMD640 is not set
: # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
: # CONFIG_BLK_DEV_ISAPNP is not set
: # CONFIG_IDE_CHIPSETS is not set
: # CONFIG_IDEDMA_AUTO is not set
: # CONFIG_DMA_NONPCI is not set
: # CONFIG_BLK_DEV_IDE_MODES is not set
: # CONFIG_BLK_DEV_ATARAID is not set
: # CONFIG_BLK_DEV_ATARAID_PDC is not set
: # CONFIG_BLK_DEV_ATARAID_HPT is not set
:
: #
: # SCSI support
: #
: # CONFIG_SCSI is not set
:
: #
: # I2O device support
: #
: # CONFIG_I2O is not set
: # CONFIG_I2O_BLOCK is not set
: # CONFIG_I2O_LAN is not set
: # CONFIG_I2O_SCSI is not set
: # CONFIG_I2O_PROC is not set
:
: #
: # ISDN subsystem
: #
: # CONFIG_ISDN is not set
:
: #
: # Input core support
: #
: # CONFIG_INPUT is not set
: # CONFIG_INPUT_KEYBDEV is not set
: # CONFIG_INPUT_MOUSEDEV is not set
: # CONFIG_INPUT_JOYDEV is not set
: # CONFIG_INPUT_EVDEV is not set
:
: #
: # Character devices
: #
: CONFIG_VT=y
: # CONFIG_VT_CONSOLE is not set
: # CONFIG_SERIAL is not set
: # CONFIG_SERIAL_EXTENDED is not set
: # CONFIG_SERIAL_NONSTANDARD is not set
:
: #
: # Serial drivers
: #
: # CONFIG_SERIAL_ANAKIN is not set
: # CONFIG_SERIAL_ANAKIN_CONSOLE is not set
: # CONFIG_SERIAL_AMBA is not set
: # CONFIG_SERIAL_AMBA_CONSOLE is not set
: # CONFIG_SERIAL_CLPS711X is not set
: # CONFIG_SERIAL_CLPS711X_CONSOLE is not set
: # CONFIG_SERIAL_21285 is not set
: # CONFIG_SERIAL_21285_OLD is not set
: # CONFIG_SERIAL_21285_CONSOLE is not set
: # CONFIG_SERIAL_UART00 is not set
: # CONFIG_SERIAL_UART00_CONSOLE is not set
: CONFIG_SERIAL_SA1100=y
: CONFIG_SERIAL_SA1100_CONSOLE=y
: CONFIG_SA1100_DEFAULT_BAUDRATE=115200
: # CONFIG_SERIAL_8250 is not set
: # CONFIG_SERIAL_8250_CONSOLE is not set
: # CONFIG_SERIAL_8250_EXTENDED is not set
: # CONFIG_SERIAL_8250_MANY_PORTS is not set
: # CONFIG_SERIAL_8250_SHARE_IRQ is not set
: # CONFIG_SERIAL_8250_DETECT_IRQ is not set
: # CONFIG_SERIAL_8250_MULTIPORT is not set
: # CONFIG_SERIAL_8250_HUB6 is not set
: CONFIG_SERIAL_CORE=y
: CONFIG_SERIAL_CORE_CONSOLE=y
: CONFIG_UNIX98_PTYS=y
: CONFIG_UNIX98_PTY_COUNT=32
:
: #
: # I2C support
: #
: # CONFIG_I2C is not set
:
: #
: # L3 serial bus support
: #
: # CONFIG_L3 is not set
: # CONFIG_L3_ALGOBIT is not set
: # CONFIG_L3_BIT_SA1100_GPIO is not set
: # CONFIG_L3_SA1111 is not set
: # CONFIG_BIT_SA1100_GPIO is not set
:
: #
: # Mice
: #
: # CONFIG_BUSMOUSE is not set
: # CONFIG_MOUSE is not set
:
: #
: # Joysticks
: #
: # CONFIG_INPUT_GAMEPORT is not set
: # CONFIG_QIC02_TAPE is not set
:
: #
: # Watchdog Cards
: #
: # CONFIG_WATCHDOG is not set
: # CONFIG_INTEL_RNG is not set
: # CONFIG_NVRAM is not set
: # CONFIG_RTC is not set
: CONFIG_SA1100_RTC=y
: # CONFIG_DTLK is not set
: # CONFIG_R3964 is not set
: # CONFIG_APPLICOM is not set
:
: #
: # Ftape, the floppy tape device driver
: #
: # CONFIG_FTAPE is not set
: # CONFIG_AGP is not set
: # CONFIG_DRM is not set
:
: #
: # Multimedia devices
: #
: # CONFIG_VIDEO_DEV is not set
:
: #
: # File systems
: #
: # CONFIG_QUOTA is not set
: # CONFIG_AUTOFS_FS is not set
: # CONFIG_AUTOFS4_FS is not set
: # CONFIG_REISERFS_FS is not set
: # CONFIG_REISERFS_CHECK is not set
: # CONFIG_REISERFS_PROC_INFO is not set
: # CONFIG_ADFS_FS is not set
: # CONFIG_ADFS_FS_RW is not set
: # CONFIG_AFFS_FS is not set
: # CONFIG_HFS_FS is not set
: # CONFIG_BFS_FS is not set
: # CONFIG_EXT3_FS is not set
: # CONFIG_JBD is not set
: # CONFIG_JBD_DEBUG is not set
: CONFIG_FAT_FS=y
: CONFIG_MSDOS_FS=y
: # CONFIG_UMSDOS_FS is not set
: CONFIG_VFAT_FS=y
: # CONFIG_EFS_FS is not set
: # CONFIG_JFFS_FS is not set
: CONFIG_JFFS2_FS=y
: CONFIG_JFFS2_FS_DEBUG=0
: # CONFIG_CRAMFS is not set
: # CONFIG_TMPFS is not set
: # CONFIG_RAMFS is not set
: CONFIG_ISO9660_FS=y
: # CONFIG_JOLIET is not set
: # CONFIG_ZISOFS is not set
: # CONFIG_MINIX_FS is not set
: # CONFIG_VXFS_FS is not set
: # CONFIG_NTFS_FS is not set
: # CONFIG_NTFS_RW is not set
: # CONFIG_HPFS_FS is not set
: CONFIG_PROC_FS=y
: # CONFIG_DEVFS_FS is not set
: # CONFIG_DEVFS_MOUNT is not set
: # CONFIG_DEVFS_DEBUG is not set
: CONFIG_DEVPTS_FS=y
: # CONFIG_QNX4FS_FS is not set
: # CONFIG_QNX4FS_RW is not set
: # CONFIG_ROMFS_FS is not set
: CONFIG_EXT2_FS=y
: # CONFIG_SYSV_FS is not set
: # CONFIG_UDF_FS is not set
: # CONFIG_UDF_RW is not set
: # CONFIG_UFS_FS is not set
: # CONFIG_UFS_FS_WRITE is not set
:
: #
: # Network File Systems
: #
: # CONFIG_CODA_FS is not set
: # CONFIG_INTERMEZZO_FS is not set
: CONFIG_NFS_FS=y
: # CONFIG_NFS_V3 is not set
: # CONFIG_ROOT_NFS is not set
: # CONFIG_NFSD is not set
: # CONFIG_NFSD_V3 is not set
: CONFIG_SUNRPC=y
: CONFIG_LOCKD=y
: # CONFIG_SMB_FS is not set
: # CONFIG_NCP_FS is not set
: # CONFIG_NCPFS_PACKET_SIGNING is not set
: # CONFIG_NCPFS_IOCTL_LOCKING is not set
: # CONFIG_NCPFS_STRONG is not set
: # CONFIG_NCPFS_NFS_NS is not set
: # CONFIG_NCPFS_OS2_NS is not set
: # CONFIG_NCPFS_SMALLDOS is not set
: # CONFIG_NCPFS_NLS is not set
: # CONFIG_NCPFS_EXTRAS is not set
: # CONFIG_ZISOFS_FS is not set
: # CONFIG_ZLIB_FS_INFLATE is not set
:
: #
: # Partition Types
: #
: # CONFIG_PARTITION_ADVANCED is not set
: CONFIG_MSDOS_PARTITION=y
: # CONFIG_SMB_NLS is not set
: CONFIG_NLS=y
:
: #
: # Native Language Support
: #
: CONFIG_NLS_DEFAULT="iso8859-1"
: # CONFIG_NLS_CODEPAGE_437 is not set
: # CONFIG_NLS_CODEPAGE_737 is not set
: # CONFIG_NLS_CODEPAGE_775 is not set
: # CONFIG_NLS_CODEPAGE_850 is not set
: # CONFIG_NLS_CODEPAGE_852 is not set
: # CONFIG_NLS_CODEPAGE_855 is not set
: # CONFIG_NLS_CODEPAGE_857 is not set
: # CONFIG_NLS_CODEPAGE_860 is not set
: # CONFIG_NLS_CODEPAGE_861 is not set
: # CONFIG_NLS_CODEPAGE_862 is not set
: # CONFIG_NLS_CODEPAGE_863 is not set
: # CONFIG_NLS_CODEPAGE_864 is not set
: # CONFIG_NLS_CODEPAGE_865 is not set
: # CONFIG_NLS_CODEPAGE_866 is not set
: # CONFIG_NLS_CODEPAGE_869 is not set
: # CONFIG_NLS_CODEPAGE_936 is not set
: # CONFIG_NLS_CODEPAGE_950 is not set
: # CONFIG_NLS_CODEPAGE_932 is not set
: # CONFIG_NLS_CODEPAGE_949 is not set
: # CONFIG_NLS_CODEPAGE_874 is not set
: # CONFIG_NLS_ISO8859_8 is not set
: # CONFIG_NLS_CODEPAGE_1251 is not set
: # CONFIG_NLS_ISO8859_1 is not set
: # CONFIG_NLS_ISO8859_2 is not set
: # CONFIG_NLS_ISO8859_3 is not set
: # CONFIG_NLS_ISO8859_4 is not set
: # CONFIG_NLS_ISO8859_5 is not set
: # CONFIG_NLS_ISO8859_6 is not set
: # CONFIG_NLS_ISO8859_7 is not set
: # CONFIG_NLS_ISO8859_9 is not set
: # CONFIG_NLS_ISO8859_13 is not set
: # CONFIG_NLS_ISO8859_14 is not set
: # CONFIG_NLS_ISO8859_15 is not set
: # CONFIG_NLS_KOI8_R is not set
: # CONFIG_NLS_KOI8_U is not set
: # CONFIG_NLS_UTF8 is not set
:
: #
: # Console drivers
: #
: CONFIG_PC_KEYMAP=y
: # CONFIG_VGA_CONSOLE is not set
:
: #
: # Frame-buffer support
: #
: # CONFIG_FB is not set
:
: #
: # Sound
: #
: # CONFIG_SOUND is not set
:
: #
: # Multimedia Capabilities Port drivers
: #
: # CONFIG_MCP is not set
: # CONFIG_MCP_SA1100 is not set
: # CONFIG_MCP_UCB1200 is not set
: # CONFIG_MCP_UCB1200_AUDIO is not set
: # CONFIG_MCP_UCB1200_TS is not set
:
: #
: # USB support
: #
: # CONFIG_USB is not set
: # CONFIG_USB_UHCI is not set
: # CONFIG_USB_UHCI_ALT is not set
: # CONFIG_USB_OHCI is not set
: # CONFIG_USB_OHCI_SA1111 is not set
: # CONFIG_USB_AUDIO is not set
: # CONFIG_USB_BLUETOOTH is not set
: # CONFIG_USB_STORAGE is not set
: # CONFIG_USB_STORAGE_DEBUG is not set
: # CONFIG_USB_STORAGE_DATAFAB is not set
: # CONFIG_USB_STORAGE_FREECOM is not set
: # CONFIG_USB_STORAGE_ISD200 is not set
: # CONFIG_USB_STORAGE_DPCM is not set
: # CONFIG_USB_STORAGE_HP8200e is not set
: # CONFIG_USB_STORAGE_SDDR09 is not set
: # CONFIG_USB_STORAGE_JUMPSHOT is not set
: # CONFIG_USB_ACM is not set
: # CONFIG_USB_PRINTER is not set
: # CONFIG_USB_DC2XX is not set
: # CONFIG_USB_MDC800 is not set
: # CONFIG_USB_SCANNER is not set
: # CONFIG_USB_MICROTEK is not set
: # CONFIG_USB_HPUSBSCSI is not set
: # CONFIG_USB_PEGASUS is not set
: # CONFIG_USB_KAWETH is not set
: # CONFIG_USB_CATC is not set
: # CONFIG_USB_CDCETHER is not set
: # CONFIG_USB_USBNET is not set
: # CONFIG_USB_USS720 is not set
:
: #
: # USB Serial Converter support
: #
: # CONFIG_USB_SERIAL is not set
: # CONFIG_USB_SERIAL_GENERIC is not set
: # CONFIG_USB_SERIAL_BELKIN is not set
: # CONFIG_USB_SERIAL_WHITEHEAT is not set
: # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
: # CONFIG_USB_SERIAL_EMPEG is not set
: # CONFIG_USB_SERIAL_FTDI_SIO is not set
: # CONFIG_USB_SERIAL_VISOR is not set
: # CONFIG_USB_SERIAL_IR is not set
: # CONFIG_USB_SERIAL_EDGEPORT is not set
: # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
: # CONFIG_USB_SERIAL_KEYSPAN is not set
: # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
: # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
: # CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
: # CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
: # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
: # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
: # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
: # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
: # CONFIG_USB_SERIAL_MCT_U232 is not set
: # CONFIG_USB_SERIAL_PL2303 is not set
: # CONFIG_USB_SERIAL_CYBERJACK is not set
: # CONFIG_USB_SERIAL_XIRCOM is not set
: # CONFIG_USB_SERIAL_OMNINET is not set
: # CONFIG_USB_RIO500 is not set
:
: #
: # Bluetooth support
: #
: # CONFIG_BLUEZ is not set
:
: #
: # Kernel hacking
: #
: # CONFIG_NO_FRAME_POINTER is not set
: CONFIG_DEBUG_USER=y
: # CONFIG_DEBUG_INFO is not set
: # CONFIG_NO_PGT_CACHE is not set
: # CONFIG_DEBUG_KERNEL is not set
: # CONFIG_DEBUG_SLAB is not set
: # CONFIG_MAGIC_SYSRQ is not set
: # CONFIG_DEBUG_SPINLOCK is not set
: # CONFIG_DEBUG_WAITQ is not set
: # CONFIG_DEBUG_BUGVERBOSE is not set
: # CONFIG_DEBUG_ERRORS is not set
: # CONFIG_DEBUG_LL is not set
: # CONFIG_DEBUG_DC21285_PORT is not set
: # CONFIG_DEBUG_CLPS711X_UART2 is not set
:
:
: ------------------------------------------------
: 2. 다음작업은요. 호스트 컴에서 아래와 같이했지요.
:
: 4. /2ndhard/ez/ez/sw/jffs2image 라는 디렉토리를 만들고 여기에 필요한 파 일
: 을 넣어둔다.
: cd ..
: /2ndhard/ez/ez/sw 디렉토리에서
: mkfs.jffs2 -d ./jffs2image -o ./jffs2image.image
: cp ./jffs2image.image /tftpboot
:
: -----------------------------------------------
:
: 3. 다음으로는요..
: 이지부트에서 확인을 한번 해보죠..
:
: 4. tf 0x00600000 jffs2image.image 파일을 복사
:
: 5. md 0x00600000 으로 내용들어있나 확인
:
: 아래와 같이 들어가 있어야 함
: BOOT2.0>md 0x00600000
: 0060-0000 :851901E0 2F000000 B1F944F2
: 01000000 ..../.....D.....
: 0060-0010 :00000000 02000000 193EFC3C
: 07080000 .........>.<....
: 0060-0020 :32B4B187 7B68A0EF 6C6A682E 747874FF 2...
: {h..ljh.txt.
: 0060-0030 :851902E0 A3000000 9C825FD3
: 02000000 .........._.....
:
: BOOT2.0>rst
: System Soft Reset...