안녕하세요..

K. Kernel CMD 1st [initrd=0x0800000,4M root=/dev/ram ramdisk=10240]

에서 initrd=0xa0800000 입니다... 수정하시면서 잘못 적어신것 같네요..

initrd=0xa0800000,4M root=/dev/ram ramdisk=10240

로 하시고 해 보세요..


그럼 수고하세요...



개구락지 wrote..
: 아래 메세지는 부팅될때 나온 것 입니다.
: /*===================================
: WELCOME EZBOOT.X5 V1.5 ..................for PXA255
: Program by You Young-chang, fooji ( J.D&T Co.,Ltd )
: Last Modify 2004.03.27
:
: Boot Flash Check ......................
: Detect MX29LV400T Flash : 22B9
: SIZE 4M-BIT [512Kbyte]
:
: NAND Chip Check .......................
: Detect SAMSUNG [ec:76] 64MByte
: BAD BLOCK SCAN -> Kernel, Ramdisk Bad Block [0]
:
: CS8900 Init............................
: Mac Address : [00 A2 55 F2 26 25]
: Detect value : [3000:3000]
: Chip ID : [0E63:000A]
:
:
: Copy Kernel Image .....
: Copy Ramdisk Image .....
: Starting kernel [MARCH 303]...
: Uncompressing Linux....................................................
: done, bo
: oting the kernel.
: Linux version 2.4.19-rmk7-pxa1 (root@jdt) (gcc version 3.2.1) #272 Mon
: Jan 5 12:
: 35:59 KST 2004
: CPU: XScale-PXA255 revision 6
: Machine: WWW.FALINUX.COM EZ-X5 for PXA255 Board
: Ignoring unrecognised tag 0x00000000
: initrd (0x00800000 - 0x00c00000) extends beyond physical memory -
: disabling init
: rd
: Memory clock: 99.53MHz (*27)
: Run Mode clock: 398.13MHz (*4)
: Turbo Mode clock: 398.13MHz (*1.0, inactive)
: On node 0 totalpages: 16384
: zone(0): 16384 pages.
: zone(1): 0 pages.
: zone(2): 0 pages.
: Kernel command line: y initrd=0x0800000,4M root=/dev/ram ramdisk=10240
: console=
: ttyS02,115200 ip0=192.168.10.155 nandparts=1,4,59
: Console: colour dummy device 80x30
: Calibrating delay loop... 397.31 BogoMIPS
: Memory: 64MB = 64MB total
: Memory: 63016KB available (1384K code, 319K data, 68K init)
: Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
: Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
: Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
: Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
: Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
: POSIX conformance testing by UNIFIX
: Linux NET4.0 for Linux 2.4
: Based upon Swansea University Computer Society NET3.039
: Initializing RT netlink socket
: Using PXA255 frequency points.
: Registering CPU frequency change support.
: CPU clock: 398.131 MHz (99.000-400.000 MHz)
: Starting kswapd
: Console: switching to colour frame buffer device 80x30
: LCD resolution 640x480
: pty: 256 Unix98 ptys configured
: Serial driver version 5.05c (2001-07-08) with no serial options enabled
: ttyS00 at 0x0000 (irq = 15) is a PXA UART
: ttyS01 at 0x0000 (irq = 14) is a PXA UART
: ttyS02 at 0x0000 (irq = 13) is a PXA UART
: mk712 device OK!
: Uniform Multi-Platform E-IDE driver Revision: 6.31
: ide: Assuming 50MHz system bus speed for PIO modes; override with
: idebus=xx
: eth0: cs8900 rev K Base 0xF1000300<6>, IRQ 44, MAC 00:A2:55:F2:26:25
: RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
: loop: loaded (max 8 devices)
: NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB 3,3V)
: Creating 3 MTD partitions on "NAND 64MB 3,3V":
: 0x00000000-0x00100000 : "EZ-X5 Kernel partition"
: 0x00100000-0x00500000 : "EZ-X5 Ramdisk partition"
: 0x00500000-0x04000000 : "EZ-X5 Data partition 0"
: MMC subsystem, $Revision: 0.3.1.14 $
: MMC block device driver, $Revision: 0.3.1.16 $
: PXA250 MMC controller driver, $Revision: 0.3.1.12 $
: Linux Kernel Card Services 3.1.22
: options: none
: Intel PXA250/210 PCMCIA (CS release 3.1.22)
: NET4: Linux TCP/IP 1.0 for NET4.0
: IP Protocols: ICMP, UDP, TCP
: IP: routing cache hash table of 512 buckets, 4Kbytes
: TCP: Hash tables configured (established 4096 bind 8192)
: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
: NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
: FAT: bogus logical sector size 65471
: yaffs: dev is 256 name is "01:00"
: VFS: Mounted root (yaffs filesystem) readonly.
: Freeing init memory: 68K
: Warning: unable to open an initial console.
: Kernel panic: No init found. Try passing init= option to kernel.
:
:
: WELCOME EZBOOT.X5 V1.5 ..................for PXA255
: Program by You Young-chang, fooji ( J.D&T Co.,Ltd )
: Last Modify 2004.03.27
:
: Boot Flash Check ......................
: Detect MX29LV400T Flash : 22B9
: SIZE 4M-BIT [512Kbyte]
:
: NAND Chip Check .......................
: Detect SAMSUNG [ec:76] 64MByte
: BAD BLOCK SCAN -> Kernel, Ramdisk Bad Block [0]
:
: CS8900 Init............................
: Mac Address : [00 A2 55 F2 26 25]
: Detect value : [3000:3000]
: Chip ID : [0E63:000A]
:
: Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar]
:
: EZBOOT>set
:
:
: ^^;
: 1. MAC Address [00:a2:55:f2:26:25]
: 2. LOCAL IP [192.168.10.155]
: 3. HOST IP [0.0.0.0]
: 4. Host tftp directory []
: 5. zImage file name [zImage.x5]
: 6. ram disk file name [ramdisk.x5.gz]
: 7. boot loader file name [ezboot.x5]
:
: A. Autoboot wait time [3]
: B. Boot Menu Key [ ]
: C. Copy Ramdisk [Y/N] [Y]
: D. Architecture Number [303]
: E. Serial FF/BT/ST(0/1/2) [2]
: F. NAND-Partition MByte (kernel:ramdisk:app) [1:4:59]
: W. Watchdog (sec, off=0) [0]
:
: K. Kernel CMD 1st [initrd=0x0800000,4M root=/dev/ram ramdisk=10240]
: M. Kernel CMD 2nd [console=ttyS02,115200]
: N. Kernel CMD 3rd []
:
: L. Load Default
: P. Apply & Exit
: S. Save
: 0. Exit
:
: Select >>
:
: //===========================*/
:
:
: 이상입니다.
:
: 이미지는 씨디에 있는 것입니다.
:
: zImage.x5.pcmcia
: ramdisk.x5.pcmcia-10M.gz
:
: 이것 수정 없이 올린 상황 입니다.
:
: 왜그런지 알려주세요...
: 그럼 수고하세요...^^