도와주세요!!
2005.03.17 01:36:43 (*.96.17.236)
6658
안녕하세요.
현재 상황을 말씀드리자면 램디스크를 램에 다운로드 한다음에 부팅하면 정상
적으로 동작합니다. 캡쳐한 내용은 밑에 있구요.
그리고 리눅스에서는 tftp로는 용량이 커서 안되구요.
윈도우용 tftp서버에서 플래시로 다운로드 하면 다운로드 및 쓰기는 잘 되는
데 항상 같은 지점에서 verify error가 발생합니다.
HOST IP : [192.168.10.153]
LOCAL IP : [192.168.10.155]
Resive Address : A100-0000
TFTP Request Send
ALL DATA RESIVE OK [ 8388622 bytes ]
Erase : OK
Write : OK
Verify Error page-16384: df7f0000/00000000
자료게시판의 다운로드 프로그램을 이용하면 커널이 2.6이라서 그런지 먹통이
구요.
시리얼로 다운로드하면 정상적으로 다운로드하여 쓰기가 됩니다만 부팅시
Copy Ramdisk Image...에서 멈춰버립니다. 도대체 뭐가 문제인지.. ㅡㅜ
WELCOME EZBOOT.X5 V1.7...................for
PXA255
Program by You Young-chang, fooji (FALinux
Co.,Ltd)
Last Modify 2004.11.17
Boot Flash
Check ......................
Detect MX29LV400 (TOP)Flash : 22B9
SIZE 4M-BIT [512Kbyte]
NAND Chip
Check .......................
Detect SAMSUNG [ec:76] 64MByte
BAD BLOCK SCAN -> Kernel, Ramdisk Bad Block
[1]
CS8900
Init............................
Mac Address : [00 A2 55 F2 26 25]
Detect value : [3000:3000]
Chip ID : [0E63:000A]
Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space
bar].....
Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel [MARCH 608]...
Uncompressing
Linux.............................................................
....... done, booting the kernel.
Linux version 2.6.9-ez1 (root@localhost.localdomain) (gcc version 3.3)
#14 Thu
M
ar 17 01:36:17 KST 2005
CPU: XScale-PXA255 [69052d06] revision 6
(ARMv5TE)
CPU: D undefined 5 cache
CPU: I cache: 32768 bytes, associativity 32, 32 byte lines, 32
sets
CPU: D cache: 32768 bytes, associativity 32, 32 byte lines, 32
sets
Machine: WWW.FALINUX.COM EZ-X5 for PXA255
Board
Check ezboot Magic Value [20030702]
Check ezboot Check String [CMD=]
Check ezboot command line [ mem=64M initrd=0xa0800000,8M root=/dev/ram0
ramdisk=
8192 console=tty1 console=ttyS02,115200 ip0=192.168.10.155
nandparts=1,8,55]
Memory policy: ECC disabled, Data cache
writeback
Memory clock: 99.53MHz (*27)
Run Mode clock: 398.13MHz (*4)
Turbo Mode clock: 398.13MHz (*1.0,
inactive)
Built 1 zonelists
Kernel command line: mem=64M initrd=0xa0800000,8M root=/dev/ram0
ramdisk=8192
console=tty1 console=ttyS02,115200 ip0=192.168.10.155
nandparts=1,8,
PID hash table entries: 512 (order: 9, 8192
bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536
bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768
bytes)
Memory: 64MB = 64MB total
Memory: 54432KB available (1717K code, 374K data, 76K
init)
Mount-cache hash table entries: 512 (order: 0, 4096
bytes)
CPU: Testing write buffer coherency:
ok
checking if image is initramfs...it isn't (ungzip failed); looks like an
initrd
Freeing initrd memory: 8192K
NET: Registered protocol family 16
EZ-X5 Init
NetWinder Floating Point Emulator V0.97 (double
precision)
Initializing Cryptographic API
pxa2xx-fb pxa2xx-fb: machine LCCR0 setting contains illegal bits:
00300878
pxa2xx-fb pxa2xx-fb: machine LCCR3 setting contains illegal bits:
00300000
Console: switching to colour frame buffer device
100x30
ttyS0 at MMIO 0x40100000 (irq = 15) is a
FFUART
ttyS1 at MMIO 0x40200000 (irq = 14) is a
BTUART
ttyS2 at MMIO 0x40700000 (irq = 13) is a
STUART
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024
blocksize
loop: loaded (max 8 devices)
Using anticipatory io scheduler
nbd: registered device at major 43
eth0: cs8900 rev K Base 0xF1000300<6>, IRQ 44, MAC
00:A2:55:F2:26:25
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB
3,3V 8-
bit
)
NAND_ECC_NONE selected by board driver. This is not
recommended !!
Scanning device for bad blocks
Bad eraseblock 0 at 0x00000000
Creating 3 MTD partitions on "NAND 64MiB 3,3V 8-bit":
0x00000000-0x00100000 : "EZ-X5 Kernel partition"
0x00100000-0x00900000 : "EZ-X5 Ramdisk partition"
0x00900000-0x04000000 : "EZ-X5 Data partition 0"
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 8192KiB [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 76K
INIT: version 2.84 booting
INIT: Entering runlevel: 3
mount: Mounting /dev/mtdblock2 on /app failed: No such device
Starting system logger: syslogd
Starting INET services: inetd
Welcome to J.D&T EZ-X5 ( www.falinux.com )
XScale(PXA255) Linux
ez-x5 login:
현재 상황을 말씀드리자면 램디스크를 램에 다운로드 한다음에 부팅하면 정상
적으로 동작합니다. 캡쳐한 내용은 밑에 있구요.
그리고 리눅스에서는 tftp로는 용량이 커서 안되구요.
윈도우용 tftp서버에서 플래시로 다운로드 하면 다운로드 및 쓰기는 잘 되는
데 항상 같은 지점에서 verify error가 발생합니다.
HOST IP : [192.168.10.153]
LOCAL IP : [192.168.10.155]
Resive Address : A100-0000
TFTP Request Send
ALL DATA RESIVE OK [ 8388622 bytes ]
Erase : OK
Write : OK
Verify Error page-16384: df7f0000/00000000
자료게시판의 다운로드 프로그램을 이용하면 커널이 2.6이라서 그런지 먹통이
구요.
시리얼로 다운로드하면 정상적으로 다운로드하여 쓰기가 됩니다만 부팅시
Copy Ramdisk Image...에서 멈춰버립니다. 도대체 뭐가 문제인지.. ㅡㅜ
WELCOME EZBOOT.X5 V1.7...................for
PXA255
Program by You Young-chang, fooji (FALinux
Co.,Ltd)
Last Modify 2004.11.17
Boot Flash
Check ......................
Detect MX29LV400 (TOP)Flash : 22B9
SIZE 4M-BIT [512Kbyte]
NAND Chip
Check .......................
Detect SAMSUNG [ec:76] 64MByte
BAD BLOCK SCAN -> Kernel, Ramdisk Bad Block
[1]
CS8900
Init............................
Mac Address : [00 A2 55 F2 26 25]
Detect value : [3000:3000]
Chip ID : [0E63:000A]
Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space
bar].....
Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel [MARCH 608]...
Uncompressing
Linux.............................................................
....... done, booting the kernel.
Linux version 2.6.9-ez1 (root@localhost.localdomain) (gcc version 3.3)
#14 Thu
M
ar 17 01:36:17 KST 2005
CPU: XScale-PXA255 [69052d06] revision 6
(ARMv5TE)
CPU: D undefined 5 cache
CPU: I cache: 32768 bytes, associativity 32, 32 byte lines, 32
sets
CPU: D cache: 32768 bytes, associativity 32, 32 byte lines, 32
sets
Machine: WWW.FALINUX.COM EZ-X5 for PXA255
Board
Check ezboot Magic Value [20030702]
Check ezboot Check String [CMD=]
Check ezboot command line [ mem=64M initrd=0xa0800000,8M root=/dev/ram0
ramdisk=
8192 console=tty1 console=ttyS02,115200 ip0=192.168.10.155
nandparts=1,8,55]
Memory policy: ECC disabled, Data cache
writeback
Memory clock: 99.53MHz (*27)
Run Mode clock: 398.13MHz (*4)
Turbo Mode clock: 398.13MHz (*1.0,
inactive)
Built 1 zonelists
Kernel command line: mem=64M initrd=0xa0800000,8M root=/dev/ram0
ramdisk=8192
console=tty1 console=ttyS02,115200 ip0=192.168.10.155
nandparts=1,8,
PID hash table entries: 512 (order: 9, 8192
bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536
bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768
bytes)
Memory: 64MB = 64MB total
Memory: 54432KB available (1717K code, 374K data, 76K
init)
Mount-cache hash table entries: 512 (order: 0, 4096
bytes)
CPU: Testing write buffer coherency:
ok
checking if image is initramfs...it isn't (ungzip failed); looks like an
initrd
Freeing initrd memory: 8192K
NET: Registered protocol family 16
EZ-X5 Init
NetWinder Floating Point Emulator V0.97 (double
precision)
Initializing Cryptographic API
pxa2xx-fb pxa2xx-fb: machine LCCR0 setting contains illegal bits:
00300878
pxa2xx-fb pxa2xx-fb: machine LCCR3 setting contains illegal bits:
00300000
Console: switching to colour frame buffer device
100x30
ttyS0 at MMIO 0x40100000 (irq = 15) is a
FFUART
ttyS1 at MMIO 0x40200000 (irq = 14) is a
BTUART
ttyS2 at MMIO 0x40700000 (irq = 13) is a
STUART
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024
blocksize
loop: loaded (max 8 devices)
Using anticipatory io scheduler
nbd: registered device at major 43
eth0: cs8900 rev K Base 0xF1000300<6>, IRQ 44, MAC
00:A2:55:F2:26:25
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB
3,3V 8-
bit
)
NAND_ECC_NONE selected by board driver. This is not
recommended !!
Scanning device for bad blocks
Bad eraseblock 0 at 0x00000000
Creating 3 MTD partitions on "NAND 64MiB 3,3V 8-bit":
0x00000000-0x00100000 : "EZ-X5 Kernel partition"
0x00100000-0x00900000 : "EZ-X5 Ramdisk partition"
0x00900000-0x04000000 : "EZ-X5 Data partition 0"
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 8192KiB [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 76K
INIT: version 2.84 booting
INIT: Entering runlevel: 3
mount: Mounting /dev/mtdblock2 on /app failed: No such device
Starting system logger: syslogd
Starting INET services: inetd
Welcome to J.D&T EZ-X5 ( www.falinux.com )
XScale(PXA255) Linux
ez-x5 login:
