도와주세요!!
2005.03.27 22:00:20 (*.241.131.202)
6769
: 1. 사용하신 랜케이블이 어떤건가요???? >> 일반케이블 입니다.
: 2. 리눅스 서버에 EZ-X5 단독으로 사용하시나요? 아니면 허버를 통하여 사용 하시나요?
>> 허브를 연결해서 사용합니다.
: 3. EZ-X5 에서 ifconfig 하셨어 그랩하여 올려주세요.. [root@ez-x5 /root]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:A2:55:9B:70:48
inet addr:203.241.130.203 Bcast:203.241.130.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:328 errors:2 dropped:0 overruns:0 frame:2
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:25474 (24.8 kiB) TX bytes:0 (0.0 iB)
Interrupt:44 Base address:0x300
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 iB) TX bytes:0 (0.0 iB)
[root@ez-x5 /root]$
: 4. 최초 부팅 메세지를 그랩하셨어 올려주세요.. ------------------------ 1 ----------------------
WELCOME EZBOOT.X5 V1.7...................for
PXA255
Program by You Young-chang, fooji (FALinux
Co.,Ltd)
Last Modify 2004.11.17
Boot Flash
Check ......................
Detect AM29LV400 (BOTTOM)Flash :
22BA
SIZE 4M-BIT [512Kbyte]
NAND Chip
Check .......................
Detect SAMSUNG [ec:76] 64MByte
BAD BLOCK SCAN -> Kernel, Ramdisk Bad Block
[0]
CS8900
Init............................
Mac Address : [00 A2 55 9B 70 48]
Detect value : [3000:3000]
Chip ID : [0E63:000A]
Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space
bar]
EZBOOT>ipconf
EZBOOT>
WELCOME EZBOOT.X5 V1.7...................for
PXA255
Program by You Young-chang, fooji (FALinux
Co.,Ltd)
Last Modify 2004.11.17
Boot Flash
Check ......................
Detect AM29LV400 (BOTTOM)Flash :
22BA
SIZE 4M-BIT [512Kbyte]
NAND Chip
Check .......................
Detect SAMSUNG [ec:76] 64MByte
BAD BLOCK SCAN -> Kernel, Ramdisk Bad Block
[0]
CS8900
Init............................
Mac Address : [00 A2 55 9B 70 48]
Detect value : [3000:3000]
Chip ID : [0E63:000A]
Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space
bar].....
Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel [MARCH 303]...
Uncompressing Linux.................................................
done,
booti
ng the kernel.
Linux version 2.4.19-rmk7-pxa1 (root@jdt) (gcc version 3.2.1) #416 Mon
Sep 6
14:
07:59 KST 2004
CPU: XScale-PXA255 revision 6
Machine: WWW.FALINUX.COM EZ-X5 for PXA255
Board
Ignoring unrecognised tag 0x00000000
Memory clock: 99.53MHz (*27)
Run Mode clock: 398.13MHz (*4)
Turbo Mode clock: 398.13MHz (*1.0,
inactive)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: y initrd=0xa0800000,5M root=/dev/ram ramdisk=12288
console
=ttyS02,115200 ip0=203.241.130.203
nandparts=1,5,58
Console: colour dummy device 80x30
Calibrating delay loop... 397.31
BogoMIPS
Memory: 64MB = 64MB total
Memory: 58032KB available (1284K code, 286K data, 64K
init)
Dentry cache hash table entries: 8192 (order: 4, 65536
bytes)
Inode cache hash table entries: 4096 (order: 3, 32768
bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192
bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384
bytes)
Page-cache hash table entries: 16384 (order: 4, 65536
bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society
NET3.039
Initializing RT netlink socket
Using PXA255 frequency points.
Registering CPU frequency change
support.
CPU clock: 398.131 MHz (99.000-400.000
MHz)
Starting kswapd
Console: switching to colour frame buffer device
80x30
LCD resolution 640x480
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options
enabled
ttyS00 at 0x0000 (irq = 15) is a PXA
UART
ttyS01 at 0x0000 (irq = 14) is a PXA
UART
ttyS02 at 0x0000 (irq = 13) is a PXA
UART
mk712 device OK!
eth0: cs8900 rev K Base 0xF1000300<6>, IRQ 44, MAC
00:A2:55:9B:70:48
RAMDISK driver initialized: 16 RAM disks of 12288K size 1024
blocksize
loop: loaded (max 8 devices)
SCSI subsystem driver Revision: 1.00
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB
3,3V)
Creating 3 MTD partitions on "NAND 64MB
3,3V":
0x00000000-0x00100000 : "EZ-X5 Kernel partition"
0x00100000-0x00600000 : "EZ-X5 Ramdisk partition"
0x00600000-0x04000000 : "EZ-X5 Data partition 0"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 5120K
VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 64K
INIT: version 2.84 booting
INIT: Entering runlevel: 3
yaffs: dev is 7938 name is "1f:02"
SIOCADDRT: Network is unreachable
Starting system logger: syslogd
Starting INET services: inetd
Welcome to FALinux EZ-X5 ( www.falinux.com )
XScale(PXA255) Linux
ez-x5 login:
-----------------------------2 ---------------------
WELCOME EZBOOT.X5 V1.7...................for PXA255
Program by You Young-chang, fooji (FALinux Co.,Ltd)
Last Modify 2004.11.17
Boot Flash Check ......................
Detect AM29LV400 (BOTTOM)Flash : 22BA
SIZE 4M-BIT [512Kbyte]
NAND Chip Check .......................
Detect SAMSUNG [ec:76] 64MByte
BAD BLOCK SCAN -> Kernel, Ramdisk Bad Block [0]
CS8900 Init............................
Mac Address : [00 A2 55 9B 70 48]
Detect value : [3000:3000]
Chip ID : [0E63:000A]
Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar]
EZBOOT>
장형기 wrote..
: 안녕하세요.
:
: 1. 사용하신 랜케이블이 어떤건가요????
:
: 2. 리눅스 서버에 EZ-X5 단독으로 사용하시나요? 아니면 허버를 통하여 사용 하시나요?
:
: 3. EZ-X5 에서 ifconfig 하셨어 그랩하여 올려주세요..
:
: 4. 최초 부팅 메세지를 그랩하셨어 올려주세요..
:
:
: 그럼 수고하세요..
:
:
:
:
:
: 사용자 wrote..
: : 왜 안되는지 모르겠네요.
: :
: : 메뉴얼에 있는대로 해주고 /tftpboot 폴더에 이미지를 복사해 놓고.
: :
: : 했는데도 파일을 설치 하지 않는군요..
: :
: : 호스트와 타켓보드간의 통신이 안되는거 같네요.
: :
: : 둘다 정적 IP로 셋팅해 주었고요. 호스트는 RedHat 9.0버전, VM입니다.
: :
: :
: : tftp 서비스 깔아주고(RPM) tftp파일의 내용을 수정한후에 타켓보드에서 로컬
: : IP와 호스트IP 설정해 주고 tftp로 가지고 오라는 명령을 내려주면 되는 거 아
: : 닌가요??
: :
: : 메뉴얼대로 해도 안되니 난감..;;
: :
: : 아참 그리고 telnet으로 윈도우 PC에서 하이퍼링크로 타켓보드에 명령을 내리
: : 고 있습니다.
: :
: :
: : ---------
: : ^^;
: : 1. MAC Address
: : [00:a2:55:9b:70:48]
: : 2. LOCAL IP
: : [203.241.130.203]
: : 3. HOST IP
: : [203.241.130.201]
: : 4. Host tftp directory []
: : 5. zImage file name
: : [zImage.x5]
: : 6. ram disk file name [ramdisk.x5-
: : 12M.gz]
: : 7. boot loader file name
: : [ezboot.x5]
: :
: : A. Autoboot wait time [3]
: : B. Boot Menu Key [ ]
: : C. Copy Ramdisk [Y/N] [Y]
: : D. Architecture Number [303]
: : E. Serial FF/BT/ST(0/1/2) [2]
: : F. NAND-Partition MByte [1:5:58]
: :
(kernel:ramdisk:app)
: :
: : W. Watchdog (sec, off=0) [0]
: :
: : K. Kernel CMD 1st [initrd=0xa0800000,5M root=/dev/ram
: : ramdisk=12288]
: :
: : M. Kernel CMD 2nd
: : [console=ttyS02,115200]
: : N. Kernel CMD 3rd []
: :
: : L. Load Default
: : P. Apply & Exit
: : S. Save
: : 0. Exit
: :
: : Select >>0
: :
: : EZBOOT>tfr
: : Receive ramdisk.x5-12M.gz
: : Send ARP Packet
: : Send ARP Packet
: : Send ARP Packet
: : Send ARP Packet
: : Send ARP Packet
: : ARP PACKET Error
: : Send ARP Packet
: : ARP PACKET Error
: : Send ARP Packet
: : ARP PACKET Error
: : Send ARP Packet
: : Send ARP Packet
: : ARP PACKET Error
: : Send ARP Packet
: : ARP PACKET Error
: : ARP PACKET Error
: : Send ARP Packet
: : - Fail Network Infomation
: :
: :
: : --아래는 핑테스트
: : EZBOOT>ping 203.241.130.201
: : Send ARP Packet
: : ARP PACKET Error
: : ARP PACKET Error
: : Send ARP Packet
: : Send ARP Packet
: : ARP PACKET Error
: : ARP PACKET Error
: : ARP PACKET Error
: : Send ARP Packet
: : ARP PACKET Error
: : Send ARP Packet
: : ARP PACKET Error
: : ARP PACKET Error
: : ARP PACKET Error
: : Send ARP Packet
: : ARP PACKET Error
: : Send ARP Packet
: : ARP PACKET Error
: : Send ARP Packet
: : ARP PACKET Error
: : ARP PACKET Error
: : ARP PACKET Error
: : ARP PACKET Error
: : Send ARP Packet
: : Send ARP Packet
: :
: : EZBOOT>
: :
: : -- 아래는 호스트 컴퓨터에서 타켓보드로의 핑테스트 결과
: : [root@robot root]# ping 203.241.130.203
: : PING 203.241.130.203 (203.241.130.203) 56(84) bytes of data.
: : From 203.241.130.201 icmp_seq=1 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=2 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=3 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=4 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=5 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=6 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=7 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=8 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=9 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=10 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=11 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=12 Destination Host Unreachable
: :
: : [2]+ Stopped ping 203.241.130.203
: : [root@robot root]#
: 2. 리눅스 서버에 EZ-X5 단독으로 사용하시나요? 아니면 허버를 통하여 사용 하시나요?
>> 허브를 연결해서 사용합니다.
: 3. EZ-X5 에서 ifconfig 하셨어 그랩하여 올려주세요.. [root@ez-x5 /root]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:A2:55:9B:70:48
inet addr:203.241.130.203 Bcast:203.241.130.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:328 errors:2 dropped:0 overruns:0 frame:2
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:25474 (24.8 kiB) TX bytes:0 (0.0 iB)
Interrupt:44 Base address:0x300
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 iB) TX bytes:0 (0.0 iB)
[root@ez-x5 /root]$
: 4. 최초 부팅 메세지를 그랩하셨어 올려주세요.. ------------------------ 1 ----------------------
WELCOME EZBOOT.X5 V1.7...................for
PXA255
Program by You Young-chang, fooji (FALinux
Co.,Ltd)
Last Modify 2004.11.17
Boot Flash
Check ......................
Detect AM29LV400 (BOTTOM)Flash :
22BA
SIZE 4M-BIT [512Kbyte]
NAND Chip
Check .......................
Detect SAMSUNG [ec:76] 64MByte
BAD BLOCK SCAN -> Kernel, Ramdisk Bad Block
[0]
CS8900
Init............................
Mac Address : [00 A2 55 9B 70 48]
Detect value : [3000:3000]
Chip ID : [0E63:000A]
Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space
bar]
EZBOOT>ipconf
EZBOOT>
WELCOME EZBOOT.X5 V1.7...................for
PXA255
Program by You Young-chang, fooji (FALinux
Co.,Ltd)
Last Modify 2004.11.17
Boot Flash
Check ......................
Detect AM29LV400 (BOTTOM)Flash :
22BA
SIZE 4M-BIT [512Kbyte]
NAND Chip
Check .......................
Detect SAMSUNG [ec:76] 64MByte
BAD BLOCK SCAN -> Kernel, Ramdisk Bad Block
[0]
CS8900
Init............................
Mac Address : [00 A2 55 9B 70 48]
Detect value : [3000:3000]
Chip ID : [0E63:000A]
Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space
bar].....
Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel [MARCH 303]...
Uncompressing Linux.................................................
done,
booti
ng the kernel.
Linux version 2.4.19-rmk7-pxa1 (root@jdt) (gcc version 3.2.1) #416 Mon
Sep 6
14:
07:59 KST 2004
CPU: XScale-PXA255 revision 6
Machine: WWW.FALINUX.COM EZ-X5 for PXA255
Board
Ignoring unrecognised tag 0x00000000
Memory clock: 99.53MHz (*27)
Run Mode clock: 398.13MHz (*4)
Turbo Mode clock: 398.13MHz (*1.0,
inactive)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: y initrd=0xa0800000,5M root=/dev/ram ramdisk=12288
console
=ttyS02,115200 ip0=203.241.130.203
nandparts=1,5,58
Console: colour dummy device 80x30
Calibrating delay loop... 397.31
BogoMIPS
Memory: 64MB = 64MB total
Memory: 58032KB available (1284K code, 286K data, 64K
init)
Dentry cache hash table entries: 8192 (order: 4, 65536
bytes)
Inode cache hash table entries: 4096 (order: 3, 32768
bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192
bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384
bytes)
Page-cache hash table entries: 16384 (order: 4, 65536
bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society
NET3.039
Initializing RT netlink socket
Using PXA255 frequency points.
Registering CPU frequency change
support.
CPU clock: 398.131 MHz (99.000-400.000
MHz)
Starting kswapd
Console: switching to colour frame buffer device
80x30
LCD resolution 640x480
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options
enabled
ttyS00 at 0x0000 (irq = 15) is a PXA
UART
ttyS01 at 0x0000 (irq = 14) is a PXA
UART
ttyS02 at 0x0000 (irq = 13) is a PXA
UART
mk712 device OK!
eth0: cs8900 rev K Base 0xF1000300<6>, IRQ 44, MAC
00:A2:55:9B:70:48
RAMDISK driver initialized: 16 RAM disks of 12288K size 1024
blocksize
loop: loaded (max 8 devices)
SCSI subsystem driver Revision: 1.00
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB
3,3V)
Creating 3 MTD partitions on "NAND 64MB
3,3V":
0x00000000-0x00100000 : "EZ-X5 Kernel partition"
0x00100000-0x00600000 : "EZ-X5 Ramdisk partition"
0x00600000-0x04000000 : "EZ-X5 Data partition 0"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 5120K
VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 64K
INIT: version 2.84 booting
INIT: Entering runlevel: 3
yaffs: dev is 7938 name is "1f:02"
SIOCADDRT: Network is unreachable
Starting system logger: syslogd
Starting INET services: inetd
Welcome to FALinux EZ-X5 ( www.falinux.com )
XScale(PXA255) Linux
ez-x5 login:
-----------------------------2 ---------------------
WELCOME EZBOOT.X5 V1.7...................for PXA255
Program by You Young-chang, fooji (FALinux Co.,Ltd)
Last Modify 2004.11.17
Boot Flash Check ......................
Detect AM29LV400 (BOTTOM)Flash : 22BA
SIZE 4M-BIT [512Kbyte]
NAND Chip Check .......................
Detect SAMSUNG [ec:76] 64MByte
BAD BLOCK SCAN -> Kernel, Ramdisk Bad Block [0]
CS8900 Init............................
Mac Address : [00 A2 55 9B 70 48]
Detect value : [3000:3000]
Chip ID : [0E63:000A]
Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar]
EZBOOT>
장형기 wrote..
: 안녕하세요.
:
: 1. 사용하신 랜케이블이 어떤건가요????
:
: 2. 리눅스 서버에 EZ-X5 단독으로 사용하시나요? 아니면 허버를 통하여 사용 하시나요?
:
: 3. EZ-X5 에서 ifconfig 하셨어 그랩하여 올려주세요..
:
: 4. 최초 부팅 메세지를 그랩하셨어 올려주세요..
:
:
: 그럼 수고하세요..
:
:
:
:
:
: 사용자 wrote..
: : 왜 안되는지 모르겠네요.
: :
: : 메뉴얼에 있는대로 해주고 /tftpboot 폴더에 이미지를 복사해 놓고.
: :
: : 했는데도 파일을 설치 하지 않는군요..
: :
: : 호스트와 타켓보드간의 통신이 안되는거 같네요.
: :
: : 둘다 정적 IP로 셋팅해 주었고요. 호스트는 RedHat 9.0버전, VM입니다.
: :
: :
: : tftp 서비스 깔아주고(RPM) tftp파일의 내용을 수정한후에 타켓보드에서 로컬
: : IP와 호스트IP 설정해 주고 tftp로 가지고 오라는 명령을 내려주면 되는 거 아
: : 닌가요??
: :
: : 메뉴얼대로 해도 안되니 난감..;;
: :
: : 아참 그리고 telnet으로 윈도우 PC에서 하이퍼링크로 타켓보드에 명령을 내리
: : 고 있습니다.
: :
: :
: : ---------
: : ^^;
: : 1. MAC Address
: : [00:a2:55:9b:70:48]
: : 2. LOCAL IP
: : [203.241.130.203]
: : 3. HOST IP
: : [203.241.130.201]
: : 4. Host tftp directory []
: : 5. zImage file name
: : [zImage.x5]
: : 6. ram disk file name [ramdisk.x5-
: : 12M.gz]
: : 7. boot loader file name
: : [ezboot.x5]
: :
: : A. Autoboot wait time [3]
: : B. Boot Menu Key [ ]
: : C. Copy Ramdisk [Y/N] [Y]
: : D. Architecture Number [303]
: : E. Serial FF/BT/ST(0/1/2) [2]
: : F. NAND-Partition MByte [1:5:58]
: :
(kernel:ramdisk:app)
: :
: : W. Watchdog (sec, off=0) [0]
: :
: : K. Kernel CMD 1st [initrd=0xa0800000,5M root=/dev/ram
: : ramdisk=12288]
: :
: : M. Kernel CMD 2nd
: : [console=ttyS02,115200]
: : N. Kernel CMD 3rd []
: :
: : L. Load Default
: : P. Apply & Exit
: : S. Save
: : 0. Exit
: :
: : Select >>0
: :
: : EZBOOT>tfr
: : Receive ramdisk.x5-12M.gz
: : Send ARP Packet
: : Send ARP Packet
: : Send ARP Packet
: : Send ARP Packet
: : Send ARP Packet
: : ARP PACKET Error
: : Send ARP Packet
: : ARP PACKET Error
: : Send ARP Packet
: : ARP PACKET Error
: : Send ARP Packet
: : Send ARP Packet
: : ARP PACKET Error
: : Send ARP Packet
: : ARP PACKET Error
: : ARP PACKET Error
: : Send ARP Packet
: : - Fail Network Infomation
: :
: :
: : --아래는 핑테스트
: : EZBOOT>ping 203.241.130.201
: : Send ARP Packet
: : ARP PACKET Error
: : ARP PACKET Error
: : Send ARP Packet
: : Send ARP Packet
: : ARP PACKET Error
: : ARP PACKET Error
: : ARP PACKET Error
: : Send ARP Packet
: : ARP PACKET Error
: : Send ARP Packet
: : ARP PACKET Error
: : ARP PACKET Error
: : ARP PACKET Error
: : Send ARP Packet
: : ARP PACKET Error
: : Send ARP Packet
: : ARP PACKET Error
: : Send ARP Packet
: : ARP PACKET Error
: : ARP PACKET Error
: : ARP PACKET Error
: : ARP PACKET Error
: : Send ARP Packet
: : Send ARP Packet
: :
: : EZBOOT>
: :
: : -- 아래는 호스트 컴퓨터에서 타켓보드로의 핑테스트 결과
: : [root@robot root]# ping 203.241.130.203
: : PING 203.241.130.203 (203.241.130.203) 56(84) bytes of data.
: : From 203.241.130.201 icmp_seq=1 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=2 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=3 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=4 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=5 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=6 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=7 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=8 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=9 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=10 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=11 Destination Host Unreachable
: : From 203.241.130.201 icmp_seq=12 Destination Host Unreachable
: :
: : [2]+ Stopped ping 203.241.130.203
: : [root@robot root]#
