도와주세요!!
2005.04.18 13:55:50 (*.96.17.174)
6653
공부를 위한게 아니고 급한거라면 체험수기 게시판에 올라와있는
2.6.9 커널용 패치 받으셔서 쓰면 되겠네요.
저도 그걸 받아서 사용하고 있습니다.
필요하시다면 NAND메모리까지 패치된 커널로 올려드리죠.
터치스크린까지 패치해서 올릴려고 했는데 동작을 않고 있습니다;;
초보자 wrote..
: 강좌를 보고 ex-x5 보드에 커널 2.6 zImage 만들어서 올리는데 커널 패닉 이
: 나네요..
: 무슨 에러인지 도저히 몰라서 이렇게 글을 올립니다.
: 에러 로그 :
: OME EZBOOT.X5 V1.7...................for PXA255
: Program by You Young-chang, fooji (FALinux Co.,Ltd)
: Last Modify 2004.11.17
:
: Boot Flash Check ......................
: Detect AM29LV400 (BOTTOM)Flash : 22BA
: SIZE 4M-BIT [512Kbyte]
:
: NAND Chip Check .......................
: Detect SAMSUNG [ec:76] 64MByte
: BAD BLOCK SCAN -> Kernel, Ramdisk Bad Block [0]
:
: CS8900 Init............................
: Mac Address : [00 A2 55 9B CB 09]
: Detect value : [3000:3000]
: Chip ID : [0E63:000A]
:
: Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar].....
: Copy Kernel Image .....
: Copy Ramdisk Image .....
: Starting kernel [MARCH 359]...
: Uncompressing
: Linux...................................................... done,.Linux
: version 2.6.0-test2-rmk1-pxa1-ez-x5 (root@dark) (gcc version 3.3) #17
: Thu5CPU: XScale-PXA250 [69052d06] revision 6 (ARMv5TE)
: CPU: D undefined 5 cache
: CPU: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
: CPU:, D cache: 32768, associativity 32, 32 byte lines, 32 sets
: Machine: WWW.FALINUX.COM EZ-X5 for PXA255 Board
: Check ezboot Magic Value [20030702]
: Check ezboot Check String [CMD=]
: Check ezboot command line [ mem=64M initrd=0xa0800000,8M root=/dev/ram0
: ramdisk
: Memory policy: ECC disabled, Data cache write back
: Memory clock: 99.53MHz (*27)
: Run Mode clock: 398.13MHz (*4)
: Turbo Mode clock: 398.13MHz (*1.0, inactive)
: On node 0 totalpages: 16384
: DMA zone: 16384 pages, LIFO batch:4
: Normal zone: 0 pages, LIFO batch:1
: HighMem zone: 0 pages, LIFO batch:1
: Building zonelist for node : 0
: Kernel command line: mem=64M initrd=0xa0800000,8M root=/dev/ram0
: ramdisk=81928PID hash table entries: 512 (order 9: 4096 bytes)
: Calibrating delay loop... 397.31 BogoMIPS
: Memory: 64MB = 64MB total
: Memory: 54832KB available (1348K code, 310K data, 64K init)
: Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
: Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
: -> /dev
: -> /dev/console
: -> /root
: POSIX conformance testing by UNIFIX
: Initializing RT netlink socket
: BIO: pool of 256 setup, 14Kb (56 bytes/bio)
: biovec pool[0]: 1 bvecs: 106 entries (12 bytes)
: biovec pool[1]: 4 bvecs: 106 entries (48 bytes)
: biovec pool[2]: 16 bvecs: 53 entries (192 bytes)
: biovec pool[3]: 64 bvecs: 26 entries (768 bytes)
: biovec pool[4]: 128 bvecs: 13 entries (1536 bytes)
: biovec pool[5]: 2e56 bvecs: 6 e (3072 bytes)
: eth0: cs8900 rev K Base 0xF1000300<6>, IRQ 44, MAC 00:A2:55:9B:CB:09
: pty: 2048 Unix98 ptys configured
: NetWinder Floating Point Emulator V0.97 (double precision)
: VFS: Disk quotas dquot_6.5.1
: Real Time Clock Driver v1.11
: ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART
: ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART
: ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART
: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
: loop: loaded (max 8 devices)
: Using anticipatory scheduling elevator
: nbd: registered device at major 43
: Unable to handle kernel NULL pointer dereference at virtual address
: 00000064
: pgd = c0004000
: [00000064] *pgd=00000000
: Internal error: Oops: f5 [#1]
: CPU: 0
: PC is at i8042_flush+0x34/0x88
: LR is at i8042_controller_init+0x14/0x158
: pc : [] lr : [] Not tainted
: sp : c3fd1f7c ip : 00000064 fp : c3fd1f8c
: r10: a0016470 r9 : 69052d06 r8 : c0178ee0
: r7 : c0017cc0 r6 : 00000001 r5 : c0017c94 r4 : 00000000
: r3 : 00000002 r2 : c3fd0000 r1 : 00000001 r0 : a8000053
: Flags: NzCv IRQs off FIQs off Mode SVC_32 Segment kernel
: Control: 397F Table: A0004000 DAC: 0000001D
: Process swapper (pid: 1, stack limit = 0xc3fd00ec)
: Stack: (0xc3fd1f7c to 0xc3fd2000)
: 1f60:
: c3fd0000
: 1f80: c3fd1fa4 c3fd1f90 c00136e0 c00de8a4 c0178ee0 c3fd0000 c3fd1fc0
: c3fd1fa8
: 1fa0: c0013d9c c00136d8 c3fd0000 c0017c94 00000001 c3fd1fe0 c3fd1fc4
: c0008798
: 1fc0: c0013d54 c3fd0000 00000000 c01ad068 c01a917c c3fd1ff4 c3fd1fe4
: c00180d4
: 1fe0: c000875c c0176000 00000000 c3fd1ff8 c001e1cc c0018094 00000000
: 00000000
: Backtrace:
: [] (i8042_flush+0x0/0x88) from []
: (i8042_controller_init+0x) r4 = C3FD0000
: [] (i8042_controller_init+0x0/0x158) from []
: (i8042_init+0x) r4 = C3FD0000
: [] (i8042_init+0x0/0x1ac) from []
: (do_initcalls+0x48/0xb8)
: r6 = 00000001 r5 = C0017C94 r4 = C3FD0000
: [] (do_initcalls+0x0/0xb8) from [] (init+0x4c/0x1a8)
: r7 = C01A917C r6 = C01AD068 r5 = 00000000 r4 = C3FD0000
: [] (init+0x0/0x1a8) from [] (kernel_thread+0x40/0x48)
: r4 = C0176000
: Code: e5923004 e2833001 e5823004 e3a0c064 (e5dc3000)
: <0>Kernel panic: Attempted to kill init!
:
: 조금이라도 아시는 분들 도와 주세요
: 급한거라서... 무엇 보다 겨우 커널 2.6 을 zImage 까지 만들었더니 안올라 가
: 서 미치겠습니다.
: 모든 건 강의 자료를 보고 진행했습니다.
: 답변 부탁 드립니다.
2.6.9 커널용 패치 받으셔서 쓰면 되겠네요.
저도 그걸 받아서 사용하고 있습니다.
필요하시다면 NAND메모리까지 패치된 커널로 올려드리죠.
터치스크린까지 패치해서 올릴려고 했는데 동작을 않고 있습니다;;
초보자 wrote..
: 강좌를 보고 ex-x5 보드에 커널 2.6 zImage 만들어서 올리는데 커널 패닉 이
: 나네요..
: 무슨 에러인지 도저히 몰라서 이렇게 글을 올립니다.
: 에러 로그 :
: OME EZBOOT.X5 V1.7...................for PXA255
: Program by You Young-chang, fooji (FALinux Co.,Ltd)
: Last Modify 2004.11.17
:
: Boot Flash Check ......................
: Detect AM29LV400 (BOTTOM)Flash : 22BA
: SIZE 4M-BIT [512Kbyte]
:
: NAND Chip Check .......................
: Detect SAMSUNG [ec:76] 64MByte
: BAD BLOCK SCAN -> Kernel, Ramdisk Bad Block [0]
:
: CS8900 Init............................
: Mac Address : [00 A2 55 9B CB 09]
: Detect value : [3000:3000]
: Chip ID : [0E63:000A]
:
: Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar].....
: Copy Kernel Image .....
: Copy Ramdisk Image .....
: Starting kernel [MARCH 359]...
: Uncompressing
: Linux...................................................... done,.Linux
: version 2.6.0-test2-rmk1-pxa1-ez-x5 (root@dark) (gcc version 3.3) #17
: Thu5CPU: XScale-PXA250 [69052d06] revision 6 (ARMv5TE)
: CPU: D undefined 5 cache
: CPU: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
: CPU:, D cache: 32768, associativity 32, 32 byte lines, 32 sets
: Machine: WWW.FALINUX.COM EZ-X5 for PXA255 Board
: Check ezboot Magic Value [20030702]
: Check ezboot Check String [CMD=]
: Check ezboot command line [ mem=64M initrd=0xa0800000,8M root=/dev/ram0
: ramdisk
: Memory policy: ECC disabled, Data cache write back
: Memory clock: 99.53MHz (*27)
: Run Mode clock: 398.13MHz (*4)
: Turbo Mode clock: 398.13MHz (*1.0, inactive)
: On node 0 totalpages: 16384
: DMA zone: 16384 pages, LIFO batch:4
: Normal zone: 0 pages, LIFO batch:1
: HighMem zone: 0 pages, LIFO batch:1
: Building zonelist for node : 0
: Kernel command line: mem=64M initrd=0xa0800000,8M root=/dev/ram0
: ramdisk=81928PID hash table entries: 512 (order 9: 4096 bytes)
: Calibrating delay loop... 397.31 BogoMIPS
: Memory: 64MB = 64MB total
: Memory: 54832KB available (1348K code, 310K data, 64K init)
: Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
: Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
: -> /dev
: -> /dev/console
: -> /root
: POSIX conformance testing by UNIFIX
: Initializing RT netlink socket
: BIO: pool of 256 setup, 14Kb (56 bytes/bio)
: biovec pool[0]: 1 bvecs: 106 entries (12 bytes)
: biovec pool[1]: 4 bvecs: 106 entries (48 bytes)
: biovec pool[2]: 16 bvecs: 53 entries (192 bytes)
: biovec pool[3]: 64 bvecs: 26 entries (768 bytes)
: biovec pool[4]: 128 bvecs: 13 entries (1536 bytes)
: biovec pool[5]: 2e56 bvecs: 6 e (3072 bytes)
: eth0: cs8900 rev K Base 0xF1000300<6>, IRQ 44, MAC 00:A2:55:9B:CB:09
: pty: 2048 Unix98 ptys configured
: NetWinder Floating Point Emulator V0.97 (double precision)
: VFS: Disk quotas dquot_6.5.1
: Real Time Clock Driver v1.11
: ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART
: ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART
: ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART
: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
: loop: loaded (max 8 devices)
: Using anticipatory scheduling elevator
: nbd: registered device at major 43
: Unable to handle kernel NULL pointer dereference at virtual address
: 00000064
: pgd = c0004000
: [00000064] *pgd=00000000
: Internal error: Oops: f5 [#1]
: CPU: 0
: PC is at i8042_flush+0x34/0x88
: LR is at i8042_controller_init+0x14/0x158
: pc : [
: sp : c3fd1f7c ip : 00000064 fp : c3fd1f8c
: r10: a0016470 r9 : 69052d06 r8 : c0178ee0
: r7 : c0017cc0 r6 : 00000001 r5 : c0017c94 r4 : 00000000
: r3 : 00000002 r2 : c3fd0000 r1 : 00000001 r0 : a8000053
: Flags: NzCv IRQs off FIQs off Mode SVC_32 Segment kernel
: Control: 397F Table: A0004000 DAC: 0000001D
: Process swapper (pid: 1, stack limit = 0xc3fd00ec)
: Stack: (0xc3fd1f7c to 0xc3fd2000)
: 1f60:
: c3fd0000
: 1f80: c3fd1fa4 c3fd1f90 c00136e0 c00de8a4 c0178ee0 c3fd0000 c3fd1fc0
: c3fd1fa8
: 1fa0: c0013d9c c00136d8 c3fd0000 c0017c94 00000001 c3fd1fe0 c3fd1fc4
: c0008798
: 1fc0: c0013d54 c3fd0000 00000000 c01ad068 c01a917c c3fd1ff4 c3fd1fe4
: c00180d4
: 1fe0: c000875c c0176000 00000000 c3fd1ff8 c001e1cc c0018094 00000000
: 00000000
: Backtrace:
: [
: (i8042_controller_init+0x) r4 = C3FD0000
: [
: (i8042_init+0x) r4 = C3FD0000
: [
: (do_initcalls+0x48/0xb8)
: r6 = 00000001 r5 = C0017C94 r4 = C3FD0000
: [
: r7 = C01A917C r6 = C01AD068 r5 = 00000000 r4 = C3FD0000
: [
: r4 = C0176000
: Code: e5923004 e2833001 e5823004 e3a0c064 (e5dc3000)
: <0>Kernel panic: Attempted to kill init!
:
: 조금이라도 아시는 분들 도와 주세요
: 급한거라서... 무엇 보다 겨우 커널 2.6 을 zImage 까지 만들었더니 안올라 가
: 서 미치겠습니다.
: 모든 건 강의 자료를 보고 진행했습니다.
: 답변 부탁 드립니다.
