IDE를 이용하여 HDD를 인식하려고 합니다. 사용하는 HDD는
Western Disital 10G 입니다. 먼저 HDD를 보드에 연결하고 마운트를 시도 했는
데 되지 않았습니다. 그래서 Linux Desktop으로 가져와 파티션을 나누었습니
다.

hda1 Linux
hda2 Linux
hda3 Linux swap

그런다음 Ezboard에 붙여 실행 시켰을 때의 message가 밑에 있습니다.
fdisk시 이상한 message가 함께 나옵니다. 그리고, mke2fs시에는 Error와 함
께 보드가 멈쳐진 상태로 동작하지 않습니다...
HDD중 인식이 되는 하드가 있고 인식이 되지 않는 HDD가 있는지요?

===부팅시 메시시=================================================
ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx
hda: wDc wD102Aa, ATA DISK drive
ide0 at 0xe0000000-0xe0000007,0xe000010c on irq 1
hda: 8256528 sectors (4227 MB) w/6144KiB Cache, CHS=8191/16/63
Partition check:
hda: [PTBL] [546/240/63] hda1 hda2 hda3 hda4

===fdisk 실행 메시지=============================================
[root@ezboard /root]$ fdisk /dev/hda

Command (m for help): p

Disk /dev/hda: 240 heads, 63 sectors, 546 cylinders
Units = cylinders of 15120 * 512 bytes

Device Boot Start End Blocks Id System
/dev/hda1 35508 71694 273561104+ 83 Linux
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(32, 33, 1) logical=(35507, 211, 35)
Partition 1 has different physical/logical endings:
phys=(677, 239, 63) logical=(71693, 51, 3)
/dev/hda2 36186 72236 272537072 83 Linux
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(678, 32, 1) logical=(36185, 80, 33)
Partition 2 has different physical/logical endings:
phys=(1023, 239, 63) logical=(72235, 51, 3)
/dev/hda3 36728 72340 269229256 82 Linux swap
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(1023, 239, 63) logical=(36727, 80, 33)
Partition 3 has different physical/logical endings:
phys=(1023, 239, 63) logical=(72339, 161, 1)
/dev/hda4 35508 71016 268439552 0 Empty
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(32, 32, 0) logical=(35507, 210, 35)
Partition 4 has different physical/logical endings:
phys=(32, 32, 0) logical=(71015, 181, 5)
Partition 4 does not end on cylinder boundary:
phys=(32, 32, 0) should be (32, 239, 63)

Command (m for help):

===mke2fs실행 메시지===============================================
[root@ezboard /root]$ mke2fs /dev/hda1
mke2fs 1.27 (8-Mar-2002)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
34209792 inodes, 68390276 blocks
3419513 blocks (5.00%) reserved for the super user
First data block=0
2088 block groups
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632,
2654208,
4096000, 7962624, 11239424, 20480000, 23887872

Writing inode tables: hda: write_intr error1: nr_sectors=1, stat=0x51
hda: write_intr: status=0x51 { DriveReady SeekComplete Error }
hda: write_intr: error=0x10 { SectorIdNotFound }, CHS=26822/3/2,
sector=547122207
hda: write_intr error1: nr_sectors=1, stat=0x51
hda: write_intr: status=0x51 { DriveReady SeekComplete Error }
hda: write_intr: error=0x10 { SectorIdNotFound }, CHS=26822/3/2,
sector=547122207
hda: write_intr error1: nr_sectors=1, stat=0x51
hda: write_intr: status=0x51 { DriveReady SeekComplete Error }
hda: write_intr: error=0x10 { SectorIdNotFound }, CHS=26822/3/2,
sector=547122207
hda: write_intr error1: nr_sectors=1, stat=0x51
hda: write_intr: status=0x51 { DriveReady SeekComplete Error }
hda: write_intr: error=0x10 { SectorIdNotFound }, CHS=26822/3/2,
sector=547122207
ide0: unexpected interrupt, status=0xd0, count=1