도와주세요!!
글 수 15,339
2003.02.21 14:21:13 (*.144.104.17)
6696
일단 make all까지 컴파일 되었구요
아래는 제가 컴파일까지 한거 메세지입니다.
[root@digent pcmcia-cs-3.2.3]# ./Configure --arch=arm --cc=arm-linux-
gcc --ld=arm-linux-ld
-------- Linux PCMCIA Configuration Script --------
The default responses for each question are correct for most users.
Consult the PCMCIA-HOWTO for additional info about each option.
Linux kernel source directory [/home/dylee/lec/kernel/jpt-
2.4.18/linux]: /home/dylee/lec/kernel/jpt-2.4.18/linux
The kernel source tree is version 2.4.18-rmk7-jpt1.
The current kernel build date is Thu Aug 22 18:36:08 2002.
Build 'trusting' versions of card utilities (y/n) [y]: y
Include 32-bit (CardBus) card support (y/n) [n]: n
Module install directory [/home/dylee/lec/ramdisk/jpt-2.4.18-rmk7-jpt1]:
WARNING: '/home/dylee/lec/ramdisk/jpt-2.4.18-rmk7-jpt1' is an unusual
target. Be careful!
Kernel configuration options:
Kernel-tree PCMCIA support is enabled.
Symmetric multiprocessing support is disabled.
Preemptive kernel support is disabled.
PCI BIOS support is disabled.
Power management (APM) support is disabled.
SCSI support is disabled.
IEEE 1394 (FireWire) support is disabled.
Networking support is enabled.
Radio network interface support is disabled.
Token Ring device support is disabled.
Fast switching is disabled.
Frame Diverter is disabled.
Module version checking is disabled.
Kernel debugging support is enabled.
Memory leak detection support is disabled.
Spinlock debugging is disabled.
Preemptive kernel patch is disabled.
/proc filesystem support is enabled.
It looks like you have a System V init file setup.
The Forms library is not available.
The X11/Xaw libraries are not available.
The GTK+ library is not available.
Configuration successful.
Your kernel is configured with PCMCIA driver support. Therefore,
'make all' will compile the PCMCIA utilities but not the drivers.
[root@digent pcmcia-cs-3.2.3]# make all
make[1]: 들어감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-
3.2.3/cardmgr' 디렉토리
arm-linux-gcc -MD -O -Wall -Wstrict-prototypes -pipe -
I../include/static -I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -
I../include -I../modules -c cardmgr.c
arm-linux-gcc -c -MD -O -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules yacc_config.c
arm-linux-gcc -c -MD -O -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules lex_config.c
arm-linux-gcc cardmgr.o yacc_config.o lex_config.o -o cardmgr
arm-linux-gcc -O -Wall -Wstrict-prototypes -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules cardctl.c -o cardctl
arm-linux-gcc -O -Wall -Wstrict-prototypes -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules ifport.c -o ifport
arm-linux-gcc -O -Wall -Wstrict-prototypes -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules ifuser.c -o ifuser
arm-linux-gcc -O -Wall -Wstrict-prototypes -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules ide_info.c -o ide_info
arm-linux-gcc -O -Wall -Wstrict-prototypes -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules pcic_probe.c -o pcic_probe
make[1]: 나감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-
3.2.3/cardmgr' 디렉토리
make[1]: 들어감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-
3.2.3/flash' 디렉토리
arm-linux-gcc -MD -O -Wall -Wstrict-prototypes -pipe -
I../include/static -I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -
I../include -c ftl_format.c
arm-linux-gcc ftl_format.o -o ftl_format
arm-linux-gcc -MD -O -Wall -Wstrict-prototypes -pipe -
I../include/static -I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -
I../include -c ftl_check.c
arm-linux-gcc ftl_check.o -o ftl_check
make[1]: 나감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-3.2.3/flash'
디렉토리
make[1]: 들어감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-3.2.3/debug-
tools' 디렉토리
arm-linux-gcc -MD -O -Wall -Wstrict-prototypes -pipe -
I../include/static -I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -
I../include -I../modules -c dump_cis.c
arm-linux-gcc dump_cis.o -o dump_cis
arm-linux-gcc -MD -O -Wall -Wstrict-prototypes -pipe -
I../include/static -I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -
I../include -I../modules -c dump_cisreg.c
arm-linux-gcc dump_cisreg.o -o dump_cisreg
arm-linux-gcc -MD -O -Wall -Wstrict-prototypes -pipe -
I../include/static -I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -
I../include -I../modules -c pack_cis.c
arm-linux-gcc -MD -O -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules -c lex_cis.c
arm-linux-gcc -MD -O -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules -c yacc_cis.c
arm-linux-gcc pack_cis.o lex_cis.o yacc_cis.o -o pack_cis -lm
arm-linux-gcc -O -Wall -Wstrict-prototypes -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules dump_exca.c -o dump_exca
arm-linux-gcc -MD -O -Wall -Wstrict-prototypes -pipe -
I../include/static -I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -
I../include -I../modules -c dump_tcic.c
arm-linux-gcc dump_tcic.o -o dump_tcic
make[1]: 나감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-3.2.3/debug-
tools'
디렉토리
make[1]: 들어감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-3.2.3/man'
디렉토리
make[1]: Nothing to be done for `all'.
make[1]: 나감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-3.2.3/man' 디
렉토리
make[1]: 들어감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-3.2.3/etc'
디렉토리
make[1]: Nothing to be done for `all'.
make[1]: 나감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-3.2.3/etc' 디
렉토리
이두연 wrote..
: 스트롱암에 리눅스 2.4.18에 pcmcia 플래쉬 디스크를 올리려고 합니다
: 지금 하드웨어 없이 커널과 pcmcia card service를 컴파일
: 하려고 하는데요. 커널은 잘 컴파일 映맙
아래는 제가 컴파일까지 한거 메세지입니다.
[root@digent pcmcia-cs-3.2.3]# ./Configure --arch=arm --cc=arm-linux-
gcc --ld=arm-linux-ld
-------- Linux PCMCIA Configuration Script --------
The default responses for each question are correct for most users.
Consult the PCMCIA-HOWTO for additional info about each option.
Linux kernel source directory [/home/dylee/lec/kernel/jpt-
2.4.18/linux]: /home/dylee/lec/kernel/jpt-2.4.18/linux
The kernel source tree is version 2.4.18-rmk7-jpt1.
The current kernel build date is Thu Aug 22 18:36:08 2002.
Build 'trusting' versions of card utilities (y/n) [y]: y
Include 32-bit (CardBus) card support (y/n) [n]: n
Module install directory [/home/dylee/lec/ramdisk/jpt-2.4.18-rmk7-jpt1]:
WARNING: '/home/dylee/lec/ramdisk/jpt-2.4.18-rmk7-jpt1' is an unusual
target. Be careful!
Kernel configuration options:
Kernel-tree PCMCIA support is enabled.
Symmetric multiprocessing support is disabled.
Preemptive kernel support is disabled.
PCI BIOS support is disabled.
Power management (APM) support is disabled.
SCSI support is disabled.
IEEE 1394 (FireWire) support is disabled.
Networking support is enabled.
Radio network interface support is disabled.
Token Ring device support is disabled.
Fast switching is disabled.
Frame Diverter is disabled.
Module version checking is disabled.
Kernel debugging support is enabled.
Memory leak detection support is disabled.
Spinlock debugging is disabled.
Preemptive kernel patch is disabled.
/proc filesystem support is enabled.
It looks like you have a System V init file setup.
The Forms library is not available.
The X11/Xaw libraries are not available.
The GTK+ library is not available.
Configuration successful.
Your kernel is configured with PCMCIA driver support. Therefore,
'make all' will compile the PCMCIA utilities but not the drivers.
[root@digent pcmcia-cs-3.2.3]# make all
make[1]: 들어감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-
3.2.3/cardmgr' 디렉토리
arm-linux-gcc -MD -O -Wall -Wstrict-prototypes -pipe -
I../include/static -I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -
I../include -I../modules -c cardmgr.c
arm-linux-gcc -c -MD -O -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules yacc_config.c
arm-linux-gcc -c -MD -O -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules lex_config.c
arm-linux-gcc cardmgr.o yacc_config.o lex_config.o -o cardmgr
arm-linux-gcc -O -Wall -Wstrict-prototypes -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules cardctl.c -o cardctl
arm-linux-gcc -O -Wall -Wstrict-prototypes -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules ifport.c -o ifport
arm-linux-gcc -O -Wall -Wstrict-prototypes -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules ifuser.c -o ifuser
arm-linux-gcc -O -Wall -Wstrict-prototypes -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules ide_info.c -o ide_info
arm-linux-gcc -O -Wall -Wstrict-prototypes -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules pcic_probe.c -o pcic_probe
make[1]: 나감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-
3.2.3/cardmgr' 디렉토리
make[1]: 들어감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-
3.2.3/flash' 디렉토리
arm-linux-gcc -MD -O -Wall -Wstrict-prototypes -pipe -
I../include/static -I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -
I../include -c ftl_format.c
arm-linux-gcc ftl_format.o -o ftl_format
arm-linux-gcc -MD -O -Wall -Wstrict-prototypes -pipe -
I../include/static -I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -
I../include -c ftl_check.c
arm-linux-gcc ftl_check.o -o ftl_check
make[1]: 나감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-3.2.3/flash'
디렉토리
make[1]: 들어감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-3.2.3/debug-
tools' 디렉토리
arm-linux-gcc -MD -O -Wall -Wstrict-prototypes -pipe -
I../include/static -I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -
I../include -I../modules -c dump_cis.c
arm-linux-gcc dump_cis.o -o dump_cis
arm-linux-gcc -MD -O -Wall -Wstrict-prototypes -pipe -
I../include/static -I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -
I../include -I../modules -c dump_cisreg.c
arm-linux-gcc dump_cisreg.o -o dump_cisreg
arm-linux-gcc -MD -O -Wall -Wstrict-prototypes -pipe -
I../include/static -I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -
I../include -I../modules -c pack_cis.c
arm-linux-gcc -MD -O -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules -c lex_cis.c
arm-linux-gcc -MD -O -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules -c yacc_cis.c
arm-linux-gcc pack_cis.o lex_cis.o yacc_cis.o -o pack_cis -lm
arm-linux-gcc -O -Wall -Wstrict-prototypes -pipe -I../include/static -
I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -I../include -
I../modules dump_exca.c -o dump_exca
arm-linux-gcc -MD -O -Wall -Wstrict-prototypes -pipe -
I../include/static -I/home/dylee/lec/kernel/jpt-2.4.18/linux/include -
I../include -I../modules -c dump_tcic.c
arm-linux-gcc dump_tcic.o -o dump_tcic
make[1]: 나감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-3.2.3/debug-
tools'
디렉토리
make[1]: 들어감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-3.2.3/man'
디렉토리
make[1]: Nothing to be done for `all'.
make[1]: 나감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-3.2.3/man' 디
렉토리
make[1]: 들어감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-3.2.3/etc'
디렉토리
make[1]: Nothing to be done for `all'.
make[1]: 나감 `/home/dylee/lec/kernel/jpt-2.4.18/pcmcia-cs-3.2.3/etc' 디
렉토리
이두연 wrote..
: 스트롱암에 리눅스 2.4.18에 pcmcia 플래쉬 디스크를 올리려고 합니다
: 지금 하드웨어 없이 커널과 pcmcia card service를 컴파일
: 하려고 하는데요. 커널은 잘 컴파일 映맙