도와주세요!!
2003.11.02 13:28:42 (*.255.89.204)
6679
./configure옵션에서
./configure -xplatform linux-arm-g++ 이라고 해야 하지 않나요?
크로스 컴파일러 armv5l을 쓰시지 않는다면
위와 같이 해야 할겁니다.
이동우 wrote..
:
: ----------------------------------------------------------------------- --
: [root@jdt qt-2.3.7]# ./configure -xplatform linux-armv5l-g++ -shared - gif
: This is the Qt/Embedded Free Edition.
:
: You are licensed to use this software under the terms of
: the GNU General Public License (GPL).
:
: Type 'G' to view the GNU General Public License.
: Type 'yes' to accept this license offer.
: Type 'no' to decline this license offer.
:
: Do you accept the terms of the license?
: => yes
:
: Choose a feature configuration:
:
: 1. Minimal (630 kB)
: 2. Small (960 kB)
: 3. Medium (1.5 MB)
: 4. Large (3 MB)
: 5. Everything (5 MB)
: 6. Your own local configuration (src/tools/qconfig-local.h)
:
: Sizes are stripped dynamic 80386 build. Static builds are smaller.
:
: Your choice (default 5):
: => 5
:
: Choose pixel-depths to support:
:
: v. VGA-16 - also enables 8bpp
: 4. 4bpp grayscale - also enables 8bpp
: 8. 8bpp
: 16. 16bpp
: 24. 24bpp - also enables 32bpp
: 32. 32bpp
:
: Each depth adds around 100Kb on 80386.
:
: Your choices (default 8,16):
: => 16
:
: Enable Qt Virtual Framebuffer support for development on X11 (default
: yes)
: => yes
:
: Building on: linux-x86-g++-shared
: Building for: linux-armv5l-g++-shared
:
: Thread support..................... no
: GIF support........................ yes
: MNG support........................ no
: JPEG support....................... no
:
: Creating makefiles...
: Qt is now configured for building. Just run make.
: To reconfigure, run make clean and configure.
:
: [root@jdt qt-2.3.7]#
: [root@jdt qt-2.3.7]# make
: ----------------------------------------------------------------------- --
:
: 이렇게 make명령을 수행하면 아래와 같은 오류 메세지가 나옵니다.
:
: In file included from /usr/arm-linux/include/netinet/in.h:225,
: from kernel/qwssocket_qws.cpp:45:
: /usr/arm-linux/include/bits/in.h:70: ANSI c++ forbids data
: member 'ip_opts' with same name as enclosing class
: make[2]: *** [kernel/qwssocket_qws.o] 오류 1
: make[2]: 나감 '/project/qt/src/qt-2.3.7/src' 디렉토리
: make[1]: *** [sub-src] 오류 2
: make[1]: 나감 '/project/qt/src/qt-2.3.7' 디렉토리
: make: *** [init] 오류 2
: [root@localhost qt-2.3.7]#
:
: 저는 ez-boardM01을 사용하고 있습니다. 그래서 qt작업할때 linux-arm으로 모
: 두 했습니다.
: 오류 수정하는 방법 좀 가르쳐 주십시요.
./configure -xplatform linux-arm-g++ 이라고 해야 하지 않나요?
크로스 컴파일러 armv5l을 쓰시지 않는다면
위와 같이 해야 할겁니다.
이동우 wrote..
:
: ----------------------------------------------------------------------- --
: [root@jdt qt-2.3.7]# ./configure -xplatform linux-armv5l-g++ -shared - gif
: This is the Qt/Embedded Free Edition.
:
: You are licensed to use this software under the terms of
: the GNU General Public License (GPL).
:
: Type 'G' to view the GNU General Public License.
: Type 'yes' to accept this license offer.
: Type 'no' to decline this license offer.
:
: Do you accept the terms of the license?
: => yes
:
: Choose a feature configuration:
:
: 1. Minimal (630 kB)
: 2. Small (960 kB)
: 3. Medium (1.5 MB)
: 4. Large (3 MB)
: 5. Everything (5 MB)
: 6. Your own local configuration (src/tools/qconfig-local.h)
:
: Sizes are stripped dynamic 80386 build. Static builds are smaller.
:
: Your choice (default 5):
: => 5
:
: Choose pixel-depths to support:
:
: v. VGA-16 - also enables 8bpp
: 4. 4bpp grayscale - also enables 8bpp
: 8. 8bpp
: 16. 16bpp
: 24. 24bpp - also enables 32bpp
: 32. 32bpp
:
: Each depth adds around 100Kb on 80386.
:
: Your choices (default 8,16):
: => 16
:
: Enable Qt Virtual Framebuffer support for development on X11 (default
: yes)
: => yes
:
: Building on: linux-x86-g++-shared
: Building for: linux-armv5l-g++-shared
:
: Thread support..................... no
: GIF support........................ yes
: MNG support........................ no
: JPEG support....................... no
:
: Creating makefiles...
: Qt is now configured for building. Just run make.
: To reconfigure, run make clean and configure.
:
: [root@jdt qt-2.3.7]#
: [root@jdt qt-2.3.7]# make
: ----------------------------------------------------------------------- --
:
: 이렇게 make명령을 수행하면 아래와 같은 오류 메세지가 나옵니다.
:
: In file included from /usr/arm-linux/include/netinet/in.h:225,
: from kernel/qwssocket_qws.cpp:45:
: /usr/arm-linux/include/bits/in.h:70: ANSI c++ forbids data
: member 'ip_opts' with same name as enclosing class
: make[2]: *** [kernel/qwssocket_qws.o] 오류 1
: make[2]: 나감 '/project/qt/src/qt-2.3.7/src' 디렉토리
: make[1]: *** [sub-src] 오류 2
: make[1]: 나감 '/project/qt/src/qt-2.3.7' 디렉토리
: make: *** [init] 오류 2
: [root@localhost qt-2.3.7]#
:
: 저는 ez-boardM01을 사용하고 있습니다. 그래서 qt작업할때 linux-arm으로 모
: 두 했습니다.
: 오류 수정하는 방법 좀 가르쳐 주십시요.
