도와주세요!!
2004.04.19 16:31:46 (*.237.27.245)
6602
아래에 I2C 초기호 않되는 문제을 올렸는데 답변이 없네요.
CD에 있는 이미지을 구대로 옮겨서 했는데 아래와 같이 나타나는데
물론 구매한지는 오래되지만 시간이 없어서 이제 해보려고 해는데
이런 문제가 발생하는데 할려주세요.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!111
I2C을 SETUP후 KRNEL을 RUN하면은 아래와 같이 PRINT 됩니다.
enable_irq(11) unbalanced from c0098420 문구가 문제인거 같은데
알수가 없네요
환경은 X5 B.D에 PS2 B.D을탑재되어 있읍니다.
참 그리고 PS2 D.B에 있는 SMD 인더턴스 100uH는 어디서 구했는지
알고싶습니다.
그런 정사각형 TYPE은 구하기가 어렵더군요.. 알려주세요
Starting kswapd
I2C: PXA algorithm module loaded.
enable_irq(11) unbalanced from c0098420
I2C: Adding PXA-I2C-Adapter.
i2c-dev.o: Registered 'PXA-I2C-Adapter' as minor 0
I2C: Scanning bus (1a)
I2C: Successfully added bus
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0x0000 (irq = 15) is a PXA UART
ttyS01 at 0x0000 (irq = 14) is a PXA UART
ttyS02 at 0x0000 (irq = 13) is a PXA UART
mk712 device OK!
eth0: cs8900 rev J Base 0xF1000300<6>, IRQ 44, MAC 00:A0:50:F0:20:20
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
SSP audio for EZ-X5 initialized
WM8721 DAC Initialized for EZ-X5
I2C: WM8721 driver successfully loaded
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB 3,3V)
Creating 3 MTD partitions on "NAND 64MB 3,3V":
0x00000000-0x00100000 : "EZ-X5 Kernel partition"
0x00100000-0x00400000 : "EZ-X5 Ramdisk partition"
0x00400000-0x04000000 : "EZ-X5 Data partition 0"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
FAT: bogus logical sector size 0
yaffs: dev is 256 name is "01:00"
VFS: Mounted root (yaffs filesystem) readonly.
Freeing init memory: 44K
Warning: unable to open an initial console.
Kernel panic: No init found. Try passing init= option to kernel
11111111111111111111111111111111111111111111111111111111111111111
CD에 있는 이미지을 구대로 옮겨서 했는데 아래와 같이 나타나는데
물론 구매한지는 오래되지만 시간이 없어서 이제 해보려고 해는데
이런 문제가 발생하는데 할려주세요.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!111
I2C을 SETUP후 KRNEL을 RUN하면은 아래와 같이 PRINT 됩니다.
enable_irq(11) unbalanced from c0098420 문구가 문제인거 같은데
알수가 없네요
환경은 X5 B.D에 PS2 B.D을탑재되어 있읍니다.
참 그리고 PS2 D.B에 있는 SMD 인더턴스 100uH는 어디서 구했는지
알고싶습니다.
그런 정사각형 TYPE은 구하기가 어렵더군요.. 알려주세요
Starting kswapd
I2C: PXA algorithm module loaded.
enable_irq(11) unbalanced from c0098420
I2C: Adding PXA-I2C-Adapter.
i2c-dev.o: Registered 'PXA-I2C-Adapter' as minor 0
I2C: Scanning bus (1a)
I2C: Successfully added bus
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0x0000 (irq = 15) is a PXA UART
ttyS01 at 0x0000 (irq = 14) is a PXA UART
ttyS02 at 0x0000 (irq = 13) is a PXA UART
mk712 device OK!
eth0: cs8900 rev J Base 0xF1000300<6>, IRQ 44, MAC 00:A0:50:F0:20:20
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
SSP audio for EZ-X5 initialized
WM8721 DAC Initialized for EZ-X5
I2C: WM8721 driver successfully loaded
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB 3,3V)
Creating 3 MTD partitions on "NAND 64MB 3,3V":
0x00000000-0x00100000 : "EZ-X5 Kernel partition"
0x00100000-0x00400000 : "EZ-X5 Ramdisk partition"
0x00400000-0x04000000 : "EZ-X5 Data partition 0"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
FAT: bogus logical sector size 0
yaffs: dev is 256 name is "01:00"
VFS: Mounted root (yaffs filesystem) readonly.
Freeing init memory: 44K
Warning: unable to open an initial console.
Kernel panic: No init found. Try passing init= option to kernel
11111111111111111111111111111111111111111111111111111111111111111
