방금전에  보드 보내드렸습니다.
Ez-x5와 PI 함께 보냈습니다.
확인 부탁드립니다.
수고하세요.^^



>안녕하세요.
>
>ps2 키보드를 꽃아놓은 상태로 부팅하셨나요?
>
>만약 그랬다면 보드를 보내주세요.
>
>확인을 해봐야 할꺼 같네요.
>
>
>>안녕하세요?
>>EZ-PI 보드를 사용해서 키보드를 사용하려구 하는데요.
>>키보드가 전혀 동작을 하지 않습니다.
>>
>>무슨 문제일까요?
>>
>>아 그리고.. VT82C42의 8M 크리스탈을 오실로스코프로 찍어봤는데요.
>>발진이 안되고 있는데요. 이게 정상적인 것인지 알고 싶습니다.
>>
>>아래 부팅 메세지입니다.
>>그럼.. 답변 부탁드립니다. 수고하세요^^
>>
>>Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar].....
>>Copy Kernel Image .....
>>Copy Ramdisk Image .....
>>Starting kernel [MARCH 303]...
>>Uncompressing Linux.......................................................... do
>>ne, booting the kernel.
>>Linux version 2.4.19-rmk7-pxa1 (root@solnae.com) (gcc version 3.2.1) #439 2006.
>>02. 17. (금) 15:26:37 KST
>>CPU: XScale-PXA255 revision 6
>>Machine: WWW.FALINUX.COM EZ-X5 for PXA255 Board
>>Ignoring unrecognised tag 0x00000000
>>Memory clock: 99.53MHz (*27)
>>Run Mode clock: 398.13MHz (*4)
>>Turbo Mode clock: 398.13MHz (*1.0, inactive)
>>On node 0 totalpages: 16384
>>zone(0): 16384 pages.
>>zone(1): 0 pages.
>>zone(2): 0 pages.
>>Kernel command line: console=tty1 console=ttySA0, 152000  initrd=0xa0800000,5M r
>>oot=/dev/ram ramdisk=12288 console=ttyS02,115200  ip0=192.168.1.24 nandparts=1,5
>>,58 arch=EZ-X5
>>Console: colour dummy device 80x30
>>Calibrating delay loop... 397.31 BogoMIPS
>>Memory: 64MB = 64MB total
>>Memory: 57720KB available (1438K code, 437K data, 68K init)
>>Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
>>Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
>>Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
>>Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
>>Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
>>POSIX conformance testing by UNIFIX
>>Linux NET4.0 for Linux 2.4
>>Based upon Swansea University Computer Society NET3.039
>>Initializing RT netlink socket
>>Using PXA255 frequency points.
>>Registering CPU frequency change support.
>>CPU clock: 398.131 MHz (99.000-400.000 MHz)
>>Starting kswapd
>>Journalled Block Device driver loaded
>>I2C: PXA algorithm module loaded.
>>I2C: Adding PXA-I2C-Adapter.
>>i2c-dev.o: Registered 'PXA-I2C-Adapter' as minor 0
>>I2C: Scanning bus (68)
>>I2C: Successfully added bus
>>Console: switching to colour frame buffer device 80x30
>>LCD resolution 640x480
>>initialize_kbd: Keyboard failed self test
>>PS2 Keyboard base:0xf1100000, irq:31 (gpio-8)
>>pty: 256 Unix98 ptys configured
>>keyboard: Timeout - AT keyboard not present?(ed)
>>keyboard: Timeout - AT keyboard not present?(f4)
>>Serial driver version 5.05c (2001-07-08) with no serial options enabled
>>ttyS00 at 0x0000 (irq = 15) is a PXA UART
>>ttyS01 at 0x0000 (irq = 14) is a PXA UART
>>ttyS02 at 0x0000 (irq = 13) is a PXA UART
>>mk712 device OK!
>>I2C: DS1307 RTC driver successfully loaded
>>eth0: cs8900 rev K Base 0xF1000300<6>, IRQ 44, MAC 00:A2:55:F2:26:25
>>RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
>>loop: loaded (max 8 devices)
>>Linux video capture interface: v1.00
>>ac97_codec: AC97 Audio codec, id: 0x4352:0x5973 (Cirrus Logic CS4202)
>>NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB 3,3V)
>>Creating 3 MTD partitions on "NAND 64MB 3,3V":
>>0x00000000-0x00100000 : "EZ-X5 Kernel partition"
>>0x00100000-0x00600000 : "EZ-X5 Ramdisk partition"
>>0x00600000-0x04000000 : "EZ-X5 Data partition 0"
>>usb.c: registered new driver usbdevfs
>>usb.c: registered new driver hub
>>usb.c: new USB bus registered, assigned bus number 1
>>host/hc_sl811.c: USB SL811 at f2000000, addr2 = f2000004, IRQ 35
>>hub.c: USB hub found
>>hub.c: 1 port detected
>>mice: PS/2 mouse device common for all mice
>>NET4: Linux TCP/IP 1.0 for NET4.0
>>IP Protocols: ICMP, UDP, TCP
>>IP: routing cache hash table of 512 buckets, 4Kbytes
>>TCP: Hash tables configured (established 4096 bind 8192)
>>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>>NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
>>RAMDISK: Compressed image found at block 0
>>Freeing initrd memory: 5120K
>>VFS: Mounted root (ext2 filesystem) readonly.
>>Freeing init memory: 68K
>>INIT: version 2.84 booting
>>INIT: Entering runlevel: 3
>>yaffs: dev is 7938 name is "1f:02"
>>SIOCADDRT: Network is unreachable
>>Starting system logger:  syslogd
>>Starting INET services:  inetd
>>
>