저번에 질문드렸는데...

asus무선랜을 올리고 있는중인데요...

우선 보드에 모듈까지 올리는건 성공했습니다..

insmod rt2570,o하면

insmod rt2570.o
Using rt2570.o
RTUSB  <7>enter rtusb init( )
usb.c: registered new driver rt2500usb
idVendor = 0xb05, idProduct = 0x1706
RTUSB  <7>usbdevice->name rausb0
RTUSB  <7>BulkOutMaxPacketSize  64

이렇게 나오구요...

ifconfig rausb0 192.168.10.100 netmask 255.255.255.0 up

이렇게 ip셋팅할려구 하면...

RT25usb  Driver version 2.0.7
RTUSB  <7>--> NICInitTransmit
RTUSB  <7>--> NICInitRecv
RTUSB  <7><-- NICInitRecv
RTUSB  <7>--> NICInitializeAsic
RTUSB  <7> !!!!!set Rx control = 1
RTUSB  <7>Read BBP_Version Value = 19
RTUSB  <7><-- NICInitializeAsic
RTUSB  <7>--> NICReadEEPROMParameters
<7>MAC address:
<7>00  <7>17  <7>31  <7>eb  <7>97  <7>5d  <7>
RTUSB  <7>  CountryRegion= 0x2
RTUSB  <7>RTMPSetPhyMode(=0)
RTUSB  <7>country code=2, RFIC=3, PHY mode=0, support 13 channels
RTUSB  <7> MlmeUpdateTxRates (MaxDesire=54, MaxSupport=54, MaxTxRate=54, Rate S)RTUSB  <7> MlmeUpdateTxRates (TxRate=11, RtsRate=2, BasicRateBitmap=0x015f)
RTUSB  <7><-- NICReadEEPROMParameters
RTUSB  <7>--> NICInitAsicFromEEPROM
RTUSB  <7>Antenna.word = 0x2815
RTUSB  <7>pAdapter->PortCfg.RfType = 0x5
RTUSB  <7><-- NICInitAsicFromEEPROM pAdapter->PortCfg.RfType = 5
RTUSB  <7>R17 tuning enable=1, R17=0x3c, range=<0x2b, 0x3c>
RTUSB  <7>RF IC=5, LED mode=0
RTUSB  <7><-- NICInitAsicFromEEPROM
RTUSB  <7>--> MLME Initialize
RTUSB  <7><-- MLME Initialize
RTUSB  <7> !!!!!set Rx control = 7e
[root@ez-x5 /app]$ RTUSB  <7>PeerBeaconAndProbeRspSanity - missing field, Sanit6RTUSB  <7> sanity check fail peerBEACON
RTUSB  <7>PeerBeaconAndProbeRspSanity - missing field, Sanity=0x06
RTUSB  <7> sanity check fail peerBEACON
RTUSB  <7>PeerBeaconAndProbeRspSanity - missing field, Sanity=0x06
RTUSB  <7> sanity check fail peerBEACON
RTUSB  <7>PeerBeaconAndProbeRspSanity - missing field, Sanity=0x06
RTUSB  <7> sanity check fail peerBEACON
RTUSB  <7>PeerBeaconAndProbeRspSanity - missing field, Sanity=0x06
RTUSB  <7> sanity check fail peerBEACON
RTUSB  <7>PeerBeaconAndProbeRspSanity - missing field, Sanity=0x06
RTUSB  <7> sanity check fail peerBEACON
RTUSB  <7>PeerBeaconAndProbeRspSanity - missing field, Sanity=0x06
RTUSB  <7> sanity check fail peerBEACON

이런메시지가 계속뜨기만 합니다....

이게대체 무슨 오류인지 도저히 모르겠어요...ㅠ.ㅠ