램디스크하고 커널이미지 올렸는데 부팅은 안되고 에러만 아래와 같이 나네요...

왜그런지 답글좀 부탁드릴께요`ㅜㅜ

====================================================
Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel ...Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel ...
Uncompressing Linux............................................. done, booting the kernel.
Linux version 2.4.19-rmk7-pxa1 (root@jdt) (gcc version 3.2.1) #3 Thu Jul 3 21:36:46 KST 2003
CPU: XScale-PXA255 revision 6
Machine: WWW.FALINUX.COM EZ-X5 for PXA255 Board
Ignoring unrecognised tag 0x00000000
Check ezboot Magic Value  [20030702]
Check ezboot Check String [CMD=]  
Check ezboot command line [keepinitrd root=/dev/ramdisk console=ttyS02,115200]  
Memory clock: 99.53MHz (*27)
Run Mode clock: 398.13MHz (*4)
Turbo Mode clock: 398.13MHz (*1.0, inactive)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: y keepinitrd root=/dev/ramdisk console=ttyS02,115200
Console: colour dummy device 80x30
Calibrating delay loop... 397.31 BogoMIPS
Memory: 64MB = 64MB total
Memory: 59168KB available (1181K code, 276K data, 64K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Using PXA255 frequency points.
Registering CPU frequency change support.
CPU clock: 398.131 MHz (99.000-400.000 MHz)
Starting kswapd
Console: switching to colour frame buffer device 80x30
LCD resolution 640x480
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0x0000 (irq = 15) is a PXA UART
ttyS01 at 0x0000 (irq = 14) is a PXA UART
ttyS02 at 0x0000 (irq = 13) is a PXA UART
mk712 device OK!
eth0: cs8900 rev K Base 0xF1000300<6>, IRQ 44, MAC 00:A2:55:F2:26:25
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB 3,3V)
Creating 3 MTD partitions on "NAND 64MB 3,3V":
0x00000000-0x00100000 : "EZ-X5 Kernel partition"
0x00100000-0x00400000 : "EZ-X5 Ramdisk partition"
0x00400000-0x04000000 : "EZ-X5 Data partition 0"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
RAMDISK: incomplete write (-28 != 32768), only wrote 8388608
invalid compressed format (err=1)VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 64K
attempt to access beyond end of device
01:00: rw=0, want=8219, limit=8192
EXT2-fs error (device ramdisk(1,0)): ext2_read_inode: unable to read inode block - inode=1712, block=8218
attempt to access beyond end of device
01:00: rw=0, want=8206, limit=8192
EXT2-fs error (device ramdisk(1,0)): ext2_read_inode: unable to read inode block - inode=1603, block=8205
attempt to access beyond end of device
01:00: rw=0, want=8198, limit=8192
EXT2-fs error (device ramdisk(1,0)): ext2_read_inode: unable to read inode block - inode=1538, block=8197
Kernel panic: No init found.  Try passing init= option to kernel.

Uncompressing Linux............................................. done, booting the kernel.
Linux version 2.4.19-rmk7-pxa1 (root@jdt) (gcc version 3.2.1) #3 Thu Jul 3 21:36:46 KST 2003
CPU: XScale-PXA255 revision 6
Machine: WWW.FALINUX.COM EZ-X5 for PXA255 Board
Ignoring unrecognised tag 0x00000000
Check ezboot Magic Value  [20030702]
Check ezboot Check String [CMD=]  
Check ezboot command line [keepinitrd root=/dev/ramdisk console=ttyS02,115200]  
Memory clock: 99.53MHz (*27)
Run Mode clock: 398.13MHz (*4)
Turbo Mode clock: 398.13MHz (*1.0, inactive)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: y keepinitrd root=/dev/ramdisk console=ttyS02,115200
Console: colour dummy device 80x30
Calibrating delay loop... 397.31 BogoMIPS
Memory: 64MB = 64MB total
Memory: 59168KB available (1181K code, 276K data, 64K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Using PXA255 frequency points.
Registering CPU frequency change support.
CPU clock: 398.131 MHz (99.000-400.000 MHz)
Starting kswapd
Console: switching to colour frame buffer device 80x30
LCD resolution 640x480
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0x0000 (irq = 15) is a PXA UART
ttyS01 at 0x0000 (irq = 14) is a PXA UART
ttyS02 at 0x0000 (irq = 13) is a PXA UART
mk712 device OK!
eth0: cs8900 rev K Base 0xF1000300<6>, IRQ 44, MAC 00:A2:55:F2:26:25
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB 3,3V)
Creating 3 MTD partitions on "NAND 64MB 3,3V":
0x00000000-0x00100000 : "EZ-X5 Kernel partition"
0x00100000-0x00400000 : "EZ-X5 Ramdisk partition"
0x00400000-0x04000000 : "EZ-X5 Data partition 0"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
RAMDISK: incomplete write (-28 != 32768), only wrote 8388608
invalid compressed format (err=1)VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 64K
attempt to access beyond end of device
01:00: rw=0, want=8219, limit=8192
EXT2-fs error (device ramdisk(1,0)): ext2_read_inode: unable to read inode block - inode=1712, block=8218
attempt to access beyond end of device
01:00: rw=0, want=8206, limit=8192
EXT2-fs error (device ramdisk(1,0)): ext2_read_inode: unable to read inode block - inode=1603, block=8205
attempt to access beyond end of device
01:00: rw=0, want=8198, limit=8192
EXT2-fs error (device ramdisk(1,0)): ext2_read_inode: unable to read inode block - inode=1538, block=8197
Kernel panic: No init found.  Try passing init= option to kernel.