ez-x5 보드에 자료실 6.30일자 커널컴파일후 부팅도중 멈춤니다.

EZBOOT>set
^^;
   1) mac address            : 00:FA:07:78:65:05
   2) local ip               : 192.168.10.200
   3) local netmask          : 255.255.255.0
   4) local gateway          : 192.168.10.1
   5) server ip              : 192.168.10.105
   6) zImage      file name  : zImage.ez-x5
   7) ram disk    file name  : ramdisk-1.11-16M.gz
   8) boot loader file name  : ezboot.ez-x5
   9) logo image  file name  :
  10) auto execute full name :
  11) autoboot wait time     : 3
  12) copy ramdisk [Y/N]     : Y
  13) arm kernel arch number : 785
  14) nand part (B,C,L,K,R,A): 0,1,0,3,5,55
  15) watchdog  (sec, off=0) : 0
  16) KCMD 1 : mem=64M
  17) KCMD 2 : initrd=0xA0800000,5M root=/dev/ram ramdisk=12288
  18) KCMD 3 : console=ttyPXA2,115200
  19) KCMD 4 :
  20) KCMD 5 :
  21) KCMD 6 :
 
  L)  Load default
      LF) load KCMD2 root=flash
      LR) load KCMD2 root=ramdisk
  S)  Save to flash
  P)  aPply & exit
  Q)  Quit
 
  Select >>
 
WELCOME EZBOOT V2.2.48 (FALINUX Co.,Ltd) ..........PXA255(EZ-X5)
Program by You Young-chang, Oh Jae-Kyoung, Jang Hyung-Gi
Last Modify Mar  6 2008
 
  Detect AM29LV400_B Flash : vid=01 pid=22BA
  SIZE 4-Mbits [512-Kbytes]
 
  Detect Samsung NAND 64M 3.3V 8-bit Flash : vid=EC pid=76
  SIZE 64-Mbytes (page=512, block=16K)
 
                                                              ...
Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel [MARCH 785]...
kernel command [EZBOOT mem=64M initrd=0xA0800000,5M root=/dev/ram ramdisk=12288
console=ttyPXA2,115200    ip0=192.168.10.200 mac=00:FA:07:78:65:05 netmask=255.2
55.255.0 gw=192.168.10.1 host=192.168.10.105 nandparts=1,8,55 ]
Uncompressing Linux.............................................................
................................................ done, booting the kernel.

자료실에 있는 zImage로는 제대로 부팅이 됩니다.
커널 옵션 변경없이 그대로 커널 컴파일후에 zImage를 올리면 위사항에서 멈춥니다.