안녕하세요 pxa270 구매를 해서 테스트 하고 있습니다.

mtd  관련 테스트를 하고 있는데

cat /proc/mtd를 하면

[root@falinux ~]$ cat /proc/mtd
dev:    size   erasesize  name

가 나옵니다.  아무래도 mtd 인시하지 못하는 것 같습니다.

커널이 분팅하면서

No NAND device found!!!
No NAND device - returning -ENXIO

이란 메세지를 보내는데 아마도 이것이 원인인 것 같습니다. (보드 결함인가요? 맞다면 택배로 AS를 보내려고 합니다.)

부트로더와 커널이미지 그리고 램디스크는  자료실과 cd 에 있는 것을 둘다  테스트 해보았고 이지부트는 잘 작동합니다.

물론 커널도 mtd를 제외한 다른 것을 잘 작동합니다.

(밑에는 PXA270 부팅 로그 입니다.)
System bus clock: 104.00MHz
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists.  Total pages: 16256
Kernel command line: EZBOOT mem=64M initrd=0xA0800000,5M root=/dev/ram ramdisk=1
6384 console=ttyPXA2,115200    ip0=192.168.10.159 mac=00:FA:08:25:00:10 netmask=
255.255.255.0 gw=192.168.10.1 host=192.168.10.147 nandparts=1,8,55
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 55808KB available (3472K code, 397K data, 120K init)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
Time: pxa_timer clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 5120K
NetWinder Floating Point Emulator V0.97 (double precision)
audit: initializing netlink socket (disabled)
audit(12.329:1): initialized
yaffs Jun 17 2008 18:02:53 Installing.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Console: switching to colour frame buffer device 80x30
pxa2xx-uart.0: ttyPXA0 at MMIO 0x40100000 (irq = 22) is a FFUART
pxa2xx-uart.1: ttyPXA1 at MMIO 0x40200000 (irq = 21) is a BTUART
pxa2xx-uart.2: ttyPXA2 at MMIO 0x40700000 (irq = 20) is a STUART
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
AX88796B: v1.1.0
AX88796B: 09/20/06 (http://www.asix.com.tw)
ax88796b: MAC ADDRESS  00 fa 08 25 00 10
No NAND device found!!!
No NAND device - returning -ENXIO
pxa27x-ohci pxa27x-ohci: PXA27x OHCI
pxa27x-ohci pxa27x-ohci: new USB bus registered, assigned bus number 1
pxa27x-ohci pxa27x-ohci: irq 3, io mem 0x4c000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
input: wm9712 TouchScreen 0.30 as /class/input/input0
wm9712ts registe complete irq=116
i2c /dev entries driver
I2C: i2c-0: PXA I2C adapter
I2C: i2c-1: PXA I2C adapter
SD Card initial
Advanced Linux Sound Architecture Driver Version 1.0.14rc3.
ASoC version 0.13.0
AC97 SoC Audio Codec 0.6
asoc: AC97 HiFi <-> pxa2xx-ac97 mapping ok
ALSA device list:
  #0: EZ-PXA270 (AC97)
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
NET: Registered protocol family 17
CAUTION: XScale iWMMXt coprocessor detected, but kernel support is missing.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 120K
INIT: version 2.86 booting
INIT: Entering runlevel: 3
mount: Mounting /dev/mtdblock2 on /app failed: No such device or address
/usr/local/apache/bin/apachectl start: httpd started
Starting system logger:                                    [  OK  ]
Starting INET services:                                    [  OK  ]

Welcome to FALinux (www.falinux.com)
Linux Kernel 2.6.21-falinux
falinux login: