도와주세요!!
다시 초기화 하려고, 플래쉬 삭제하고 커널이미지, 램디스크 이미지를 다시 다운받고
부팅을 하니 안되네요. 전에는 잘 되었는데 제가 멀 손댄것 같은데 도대체 모르겠습니다..ㅡㅜ;;;
몇번을 반복해도 똑같습니다. 굽어 살펴주세요..;;
아래는 이지부트 메시지입니다.
WELCOME EZBOOT V2.3.04 (FALINUX Co.,Ltd) ......S3C2440(EZ-S3C2440) (400MHz)
Program by You Young-chang, Oh Jae-Kyong, Jang Hyung-Gi
Last Modify Apr 30 2009
Detect Samsung NAND 64M 3.3V 8-bit Flash : vid=EC pid=76
SIZE 64-Mbytes (page=512, block=16K)
... not supported part_nr=2
clear lcd .....
Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar]
AX88796B MAC : [ 00 FA 01 A2 13 04 ]
AX88796B_Init : OK!
EZBOOT>set
^^;
1) mac address : 00:FA:01:A2:13:04
2) local ip : 192.168.10.183
3) local netmask : 255.255.255.0
4) local gateway : 192.168.10.1
5) server ip : 192.168.10.27
6) zImage file name : zImage.ez-s3c2440
7) ram disk file name : ramdisk-1.11-16M.gz
8) boot loader file name : ezboot.ez-s3c2440
9) logo image file name :
10) auto execute full name :
11) autoboot wait time : 3
12) copy ramdisk [Y/N] : Y
13) arm kernel arch number : 3007
14) nand part (B,C,L,K,R,A): 1,1,0,3,5,54
15) watchdog (sec, off=0) : 0
16) KCMD 1 : mem=64M
17) KCMD 2 : initrd=0x30800000,5M root=/dev/ram0 ramdisk=16384
18) KCMD 3 : console=ttySAC2,115200
19) KCMD 4 : video=ezfb:panel:2
20) KCMD 5 :
21) KCMD 6 :
L) Load default
LF) load KCMD2 root=flash
LR) load KCMD2 root=ramdisk
M) generlate Mac address
S) Save to flash
P) aPply & exit
Q) Quit
Select >>
아래는 부트메시지 입니다.
WELCOME EZBOOT V2.3.04 (FALINUX Co.,Ltd) ......S3C2440(EZ-S3C2440) (400MHz)
Program by You Young-chang, Oh Jae-Kyong, Jang Hyung-Gi
Last Modify Apr 30 2009
Detect Samsung NAND 64M 3.3V 8-bit Flash : vid=EC pid=76
SIZE 64-Mbytes (page=512, block=16K)
... not supported part_nr=2
clear lcd .....
Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar]......
Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel [MARCH 3007]...
kernel command [EZBOOT mem=64M initrd=0x30800000,5M root=/dev/ram0 ramdisk=1638]
Uncompressing Linux.............................................................
Linux version 2.6.21-falinux (root@hw27) (gcc version 3.4.3) #5 Wed Mar 4 17:299
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
Machine: www.falinux.com EZ-S3C2440 for S3C2440 Board
Memory policy: ECC disabled, Data cache writeback
CPU S3C2440A (id 0x32440001)
S3C244X: core 399.651 MHz, memory 133.217 MHz, peripheral 66.608 MHz
S3C24XX Clocks, (c) 2004 Simtec Electronics
CLOCK: Slow mode (2.116 MHz), fast, MPLL on, UPLL on
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Built 1 zonelists. Total pages: 16256
Kernel command line: EZBOOT mem=64M initrd=0x30800000,5M root=/dev/ram0 ramdisk
irq: clearing pending status 00000400
irq: clearing subpending status 00000080
PID hash table entries: 256 (order: 8, 1024 bytes)
timer tcon=00000009, tcnt 2b5c, tcfg 000002ff,00003333, usec 0000170f
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 55856KB available (3360K code, 391K data, 140K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
S3C2440: Initialising architecture
S3C2440: IRQ Support
S3C2440: Clock Support, DVS off
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
DMA channel 0 at c4800000, irq 33
DMA channel 1 at c4800040, irq 34
DMA channel 2 at c4800080, irq 35
DMA channel 3 at c48000c0, irq 36
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 5120K
NetWinder Floating Point Emulator V0.97 (double precision)
audit: initializing netlink socket (disabled)
audit(2.754:1): initialized
yaffs Mar 4 2009 12:38:54 Installing.
io scheduler noop registered (default)
s3c2410-lcd s3c2410-lcd: options are "panel:2"
Console: switching to colour frame buffer device 80x30
fb0: s3c2410fb frame buffer device ( 640x480x16 )
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
usbcore: registered new interface driver ub
AX88796B: v1.1.0
AX88796B: 09/20/06 (http://www.asix.com.tw)
ax88796b: MAC ADDRESS 00 fa 01 a2 13 04
Linux video capture interface: v2.00
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2440-nand s3c2440-nand: Tacls=3, 22ns Twrph0=8 60ns, Twrph1=3 22ns
NAND device: Manufacturer ID:0xec, Chip ID:0x76 (Samsung NAND 64MiB 3,3V 8-bit)
Scanning device for bad blocks
count of bad blocks = 0
Creating 3 MTD partitions on "NAND 64MiB 3,3V 8-bit":
0x00000000-0x00200000 : "falinux boot/config/logo partition"
0x00200000-0x00a00000 : "falinux kernel/ramdisk partition"
0x00a00000-0x04000000 : "falinux yaffs partition"
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
s3c2410 TouchScreen successfully loaded
input: s3c2410 TouchScreen as /class/input/input0
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
s3c2440-i2c s3c2440-i2c: slave address 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 378 KHz
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
mapped channel 0 to 0
s3c2440-sdi s3c2440-sdi: initialisation done.
Advanced Linux Sound Architecture Driver Version 1.0.14rc3.
ASoC version 0.13.0
AC97 SoC Audio Codec 0.6
asoc: AC97 HiFi <-> s3c2440-ac97 mapping ok
ALSA device list:
#0: FALINUXS3C2440 (AC97)
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
NET: Registered protocol family 17
s3c2410-rtc s3c2410-rtc: hctosys: invalid date/time
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 140K
Warning: unable to open an initial console.
답변 감사드립니다!.
부트로더 환경설정에서 L or LR -> S 시도해 보았지만 작동하지 않습니다.
커널 메시지도 Kernel command line: EZBOOT mem=64M initrd=0x30800000,5M root=/dev/ram0 ramdisk까지밖에 메시지가
안뜨네요..
안녕하세요.
혹시나 하여 2008년 6월에 컴파일된 커널이미지를 다운로드하여 실행하니 똑같은 증상이 발생하였고,,
이후 같은 시기에 컴파일된 ramdisk-1.10-12M.gz 램디스크 이미지를 복사하여 실행하니 정상 부팅이되네요..
추천 폴더에 있는 ramdisk-1.11-16M-base.gz를 사용했었는데 이게 문제였었나 봅니다..
아래는 커널 메시지 입니다. console=ttySAC2,115200 부분은 역시 출력이 안되네요.
WELCOME EZBOOT V2.3.04 (FALINUX Co.,Ltd) ......S3C2440(EZ-S3C2440) (400MHz)
Program by You Young-chang, Oh Jae-Kyong, Jang Hyung-Gi
Last Modify Apr 30 2009
Detect Samsung NAND 64M 3.3V 8-bit Flash : vid=EC pid=76
SIZE 64-Mbytes (page=512, block=16K)
... not supported part_nr=2
clear lcd .....
Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar]......
Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel [MARCH 3007]...
kernel command [EZBOOT mem=64M initrd=0x30800000,5M root=/dev/ram0 ramdisk=1638]
Uncompressing Linux.............................................................
Linux version 2.6.21-falinux (gemini@hw27) (gcc version 3.4.3) #3 Tue Jun 17 198
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
Machine: www.falinux.com EZ-S3C2440 for S3C2440 Board
Memory policy: ECC disabled, Data cache writeback
CPU S3C2440A (id 0x32440001)
S3C244X: core 399.651 MHz, memory 133.217 MHz, peripheral 66.608 MHz
S3C24XX Clocks, (c) 2004 Simtec Electronics
CLOCK: Slow mode (2.116 MHz), fast, MPLL on, UPLL on
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Built 1 zonelists. Total pages: 16256
Kernel command line: EZBOOT mem=64M initrd=0x30800000,5M root=/dev/ram0 ramdisk
irq: clearing pending status 00000400
irq: clearing subpending status 00000080
PID hash table entries: 256 (order: 8, 1024 bytes)
timer tcon=00000009, tcnt d8d2, tcfg 000002ff,00003333, usec 0000170f
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 55868KB available (3364K code, 390K data, 128K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
S3C2440: Initialising architecture
S3C2440: IRQ Support
S3C2440: Clock Support, DVS off
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
DMA channel 0 at c4800000, irq 33
DMA channel 1 at c4800040, irq 34
DMA channel 2 at c4800080, irq 35
DMA channel 3 at c48000c0, irq 36
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 5120K
NetWinder Floating Point Emulator V0.97 (double precision)
audit: initializing netlink socket (disabled)
audit(2.380:1): initialized
yaffs Jun 17 2008 19:09:50 Installing.
io scheduler noop registered (default)
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
AX88796B: v1.1.0
AX88796B: 09/20/06 (http://www.asix.com.tw)
ax88796b: MAC ADDRESS 00 fa 01 a2 13 04
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2440-nand s3c2440-nand: Tacls=3, 22ns Twrph0=8 60ns, Twrph1=3 22ns
NAND device: Manufacturer ID:0xec, Chip ID:0x76 (Samsung NAND 64MiB 3,3V 8-bit)
Scanning device for bad blocks
Creating 3 MTD partitions on "NAND 64MiB 3,3V 8-bit":
0x00000000-0x00200000 : "falinux boot/config/logo partition"
0x00200000-0x00a00000 : "falinux kernel/ramdisk partition"
0x00a00000-0x04000000 : "falinux yaffs partition"
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
s3c2410 TouchScreen successfully loaded
input: s3c2410 TouchScreen as /class/input/input0
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
s3c2440-i2c s3c2440-i2c: slave address 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 378 KHz
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
mapped channel 0 to 0
s3c2440-sdi s3c2440-sdi: initialisation done.
Advanced Linux Sound Architecture Driver Version 1.0.14rc3.
ASoC version 0.13.0
AC97 SoC Audio Codec 0.6
asoc: AC97 HiFi <-> s3c2440-ac97 mapping ok
ALSA device list:
#0: FALINUXS3C2440 (AC97)
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
NET: Registered protocol family 17
s3c2410-rtc s3c2410-rtc: hctosys: invalid date/time
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 128K
INIT: version 2.86 booting
INIT: Entering runlevel: 3
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: auto selecting yaffs1
Starting system logger: [ OK ]
Starting INET services: [ OK ]
Welcome to FALinux (www.falinux.com)
Linux Kernel 2.6.21-falinux
falinux login:
안녕하세요..
메세지의 내용으로 보아 콘솔 시리얼을 초기화 할 없어 시리얼로 더 이상 메세지를 뿌리지 않는 것 같습니다.
부트로더에서 set 명령으로 들어가서 L 이라서 타이핑하셨어 환경파일을 초기화 하고 저장하세요.
select> L
select> S
이렇게 한번 해 보시고 해 보세요...
Kernel command line: EZBOOT mem=64M initrd=0x30800000,5M root=/dev/ram0 ramdisk=16384 console=ttySAC2,115200 video=ezfb:panel:2 ip0=192.168.10.137 mac=00:FA:02:34:23:33 netmask=255.255.255.0 gw=192.168.10.1 host=192.168.10.27 nandparts=2,5,54
커널 메세지 중에서 커널 커멘드가 위와 같이 메세지를 표출하는지 확인 해 보세요..
특히 console=ttySAC2,115200 이 부분을 확인 해 보세요..
그럼 좋은 하루 되세요..