EZ-X5의 ramdisk.x5-12M.gz 이미지를 pc에 mount해서 필요한 실행파일을 ramdisk_dir/home/에 몇개 copy해서

EZ-X5보드의 메모리에 > zmr 명령으로 올렸는데 맨아래에 >gk를 치면 멈춰 버리는데

뭐가 문제죠?

=========================================================

EZBOOT>set


 ^^;
  1. MAC Address            [00:a2:09:12:00:38]
  2. LOCAL IP               [192.168.10.95]
  3. HOST IP                [192.168.10.11]
  4. Host tftp directory    [/tftpboot]
  5. zImage      file name  [zImage.x5]
  6. ram disk    file name  [ramdisk.x5-12M.gz]
  7. boot loader file name  [ezboot.x5]

  A. Autoboot wait time     [3]
  B. Boot Menu Key          [ ]
  C. Copy Ramdisk [Y/N]     [Y]
  D. Architecture Number    [303]
  E. Serial FF/BT/ST(0/1/2) [2]
  F. NAND-Partition MByte   [1:5:58] (kernel:ramdisk:app)
  W. Watchdog (sec, off=0)  [0]

  K. Kernel CMD 1st [initrd=0xa0800000,5M root=/dev/ram ramdisk=12288]
  M. Kernel CMD 2nd [console=ttyS02,115200]
  N. Kernel CMD 3rd [mem=64M]

  L. Load Default
  P. Apply & Exit
  S. Save
  0. Exit

  Select >>0

EZBOOT>gk
Starting kernel [MARCH 303]...