도와주세요!!
예전에 유영창님에게 직접 메일을 보내 답변을 얻어서 몇가지 오류를 잡아서 컴파일을 다시 해보았는데
다른 오류가 또 저를 괴롭히네요. 이 error는 무슨 뜻인지 몰라 이렇게 질문 드립니다.
부팅 메시지 입니다.
Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel [MARCH 406]...
kernel command [EZBOOT mem=64M initrd=0xA0800000,5M root=/dev/ram ramdisk=16384]
Uncompressing Linux.............................................................
Linux version 2.6.28.10 (root@localhost.localdomain) (gcc version 3.4.3) #1 Tue9
CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE), cr=0000397f
CPU: VIVT data cache, VIVT instruction cache
Machine: Intel HCDDBBVA0 Development Platform (aka Mainstone)
Memory policy: ECC disabled, Data cache writeback
Run Mode clock: 208.00MHz (*16)
Turbo Mode clock: 520.00MHz (*2.5, active)
Memory clock: 104.00MHz (/2)
System bus clock: 104.00MHz
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: EZBOOT mem=64M initrd=0xA0800000,5M root=/dev/ram ramdisk=
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 61120KB available (3360K code, 272K data, 112K init)
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 519.37 BogoMIPS (lpj=2596864)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 500 bytes
NET: Registered protocol family 16
Mainstone configured to boot from processor-flash
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (double precision)
audit: initializing netlink socket (disabled)
type=2000 audit(0.480:1): initialized
JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
msgmni has been set to 119
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
console [ttyS2] enabled
brd: module loaded
loop: module loaded
usbcore: registered new interface driver ub
smc91x: not found (-19).
Linux video capture interface: v2.00
pwc: Philips webcam module version 10.0.13 loaded.
pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PC.
pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10,
pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 an.
usbcore: registered new interface driver Philips webcam
gspca: main v2.3.0 registered
quickcam_messenger: v0.01:Logitech Quickcam Messenger USB
usbcore: registered new interface driver QCM
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
Driver 'sd' needs updating - please use bus_type methods
usbmon: debugfs is not available
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
pxa27x-ohci pxa27x-ohci: PXA27x OHCI
pxa27x-ohci pxa27x-ohci: new USB bus registered, assigned bus number 1
pxa27x-ohci pxa27x-ohci: irq 3, io mem 0x4c000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
Unhandled fault: imprecise external abort (0xcf6) at 0x00000000
Internal error: : cf6 [#1]
Modules linked in:
CPU: 0 Not tainted (2.6.28.10 #1)
PC is at mainstone_mci_init+0x2c/0x54
LR is at 0xf0000080
pc : [<c002dff4>] lr : [<f0000080>] psr: a0000013
sp : c381dd28 ip : 00000021 fp : c381dd3c
r10: c39ea4c0 r9 : 00000000 r8 : c0372554
r7 : c037255c r6 : 00000000 r5 : c39b4c00 r4 : c39b4dc0
r3 : c0316108 r2 : 00000020 r1 : c01e5d3c r0 : 000000c0
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 0000397f Table: a0004000 DAC: 00000017
Process swapper (pid: 1, stack limit = 0xc381c260)
Stack: (0xc381dd28 to 0xc381e000)
dd20: c39b4c00 c39b4dc0 c381dd74 c381dd40 c01e5fe4 c002dfd4
dd40: c39b4dc0 00000017 00000000 c037255c 00000000 c038d770 c038d770 c03a7480
dd60: 00000000 00000000 c381dd84 c381dd78 c016474c c01e5d6c c381dda8 c381dd88
dd80: c01632bc c0164738 c037255c c038d770 c0372608 c038d770 c39eb900 c381ddc4
dda0: c381ddac c0163448 c01631ec 00000000 c381ddc8 c01633e4 c381ddec c381ddc8
ddc0: c01621b4 c01633f0 c38035b8 c03725a4 00000000 c038d770 c381c000 c0386438
dde0: c381ddfc c381ddf0 c0163488 c016216c c381de2c c381de00 c0162900 c0163474
de00: c0315c30 c001fec8 c038d770 c381c000 c0019528 c0396324 00000000 00000000
de20: c381de4c c381de30 c0163910 c0162860 c001fec8 c001ff9c c381c000 c0019528
de40: c381de5c c381de50 c016486c c0163884 c381de6c c381de60 c001953c c0164800
de60: c381dfd8 c381de70 c00242e4 c0019534 00000000 c381a000 00000000 0000000d
de80: c381dee0 c381de90 c006e814 c006da98 00000000 00000044 000212d0 00000000
dea0: 00000000 00000044 00000010 00000000 00000000 c381deec ffffffff 00000000
dec0: 00000000 c381defc ffffffff 00000000 00000000 00000000 c38382a0 00000000
dee0: c03a1e00 c3803480 00000000 c381df40 c381defc c0130a00 c0089830 c3816000
df00: 00000000 000000d0 c03a0a48 00000000 c381df38 c381df20 c3837680 c3837680
df20: c38382a0 c03a0a48 00000000 00000000 00000000 c381df50 c381df44 c0130a28
df40: c0130870 c381df78 c381df54 c00c8ce0 c0130a1c c03785f4 00000000 c3837680
df60: c381df94 000000bf c03a0a48 c381df90 c381df7c c00c9000 c00c8cb4 c38382a0
df80: c03785f4 c381dfbc c381df94 c006772c c00c8fc4 00313931 00000000 c0010000
dfa0: 000000cf c03789b4 c03789f0 00000000 c381dfd8 c001fec8 c001ff9c 00000000
dfc0: 00000000 00000000 00000000 c381dff4 c381dfdc c0008b7c c0024294 00000001
dfe0: 00000000 00000000 00000000 c381dff8 c003de5c c0008b00 00004000 10010410
Backtrace:
[<c002dfc8>] (mainstone_mci_init+0x0/0x54) from [<c01e5fe4>] (pxamci_probe+0x28)
r4:c39b4dc0
[<c01e5d60>] (pxamci_probe+0x0/0x320) from [<c016474c>] (platform_drv_probe+0x2)
[<c016472c>] (platform_drv_probe+0x0/0x24) from [<c01632bc>] (driver_probe_devi)
[<c01631e0>] (driver_probe_device+0x0/0x17c) from [<c0163448>] (__driver_attach)
r8:c39eb900 r7:c038d770 r6:c0372608 r5:c038d770 r4:c037255c
[<c01633e4>] (__driver_attach+0x0/0x84) from [<c01621b4>] (bus_for_each_dev+0x5)
r6:c01633e4 r5:c381ddc8 r4:00000000
[<c0162160>] (bus_for_each_dev+0x0/0x88) from [<c0163488>] (driver_attach+0x20/)
r7:c0386438 r6:c381c000 r5:c038d770 r4:00000000
[<c0163468>] (driver_attach+0x0/0x28) from [<c0162900>] (bus_add_driver+0xac/0x)
[<c0162854>] (bus_add_driver+0x0/0x228) from [<c0163910>] (driver_register+0x98)
[<c0163878>] (driver_register+0x0/0x114) from [<c016486c>] (platform_driver_reg)
r7:c0019528 r6:c381c000 r5:c001ff9c r4:c001fec8
[<c01647f4>] (platform_driver_register+0x0/0x94) from [<c001953c>] (pxamci_init)
[<c0019528>] (pxamci_init+0x0/0x1c) from [<c00242e4>] (__exception_text_end+0x5)
[<c0024288>] (__exception_text_end+0x0/0x17c) from [<c0008b7c>] (kernel_init+0x)
[<c0008af4>] (kernel_init+0x0/0xe8) from [<c003de5c>] (do_exit+0x0/0x6c8)
r5:00000000 r4:00000000
Code: e59ec000 e3cccb01 e58ec000 e58d2000 (e3a02020)
---[ end trace 5eae305b6cd9cb28 ]---
Kernel panic - not syncing: Attempted to kill init!
예전에는 ramdisk때문에 커널 패닉이 있었는데..
커널 수정후 다시 이런 오류에 봉착했네요
혹시 해결 하신분 계신가요?
