ez-s3c2440 보드 사용중인데

WELCOME EZBOOT V2.4.02 (FALINUX Co.,Ltd) ......S3C2440(EZ-S3C2440) (400MHz)
Program by You Young-chang, Oh Jae-Kyong, Jang Hyung-Gi
Last Modify Mar 31 2011

  Detect Samsung NAND 512M 3.3V 8 bit Flash : vid=EC pid=DC
  SIZE 512-Mbytes (page=2048, block=128K oob=64) SLC

 ... not supported part_nr=2
  clear lcd .....

Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar]....

Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel [MARCH 3007]...
kernel command [EZBOOT mem=60M initrd=0x30800000,5M root=/dev/ram0 ramdisk=16384
 console=ttySAC2,115200 video=ezfb:panel:2   ip0=192.168.10.183 mac=00:AA:01:A2:
13:04 netmask=255.255.255.0 gw=192.168.10.1 host=192.168.10.80 nandparts=2,8,502
 ]
Uncompressing Linux.............................................................
............................................... done, booting the kernel.

여기에서 더이상 나아가질 않습니다.

커널은 수정해서 올렸습니다.

어떻게 해야할까요?

 

아래는 ezboot set이고요

 

1) mac address            : 00:AA:01:A2:13:04                                               
   2) local ip               : 192.168.10.183                                            
   3) local netmask          : 255.255.255.0                                           
   4) local gateway          : 192.168.10.1                                          
   5) server ip              : 192.168.10.80                                           
   6) zImage      file name  : zImage.ez-s3c2440                                               
   7) ram disk    file name  : ramdisk-1.11-16M.gz                                                 
   8) boot loader file name  : ezboot.ez-s3c2440                                               
   9) logo image  file name  :                             
  10) auto execute full name :                             
  11) autoboot wait time     : 3                               
  12) copy ramdisk [Y/N]     : Y                               
  13) arm kernel arch number : 3007                                  
  14) nand part (B,C,L,K,R,A): 1,1,0,3,5,502

  15) watchdog  (sec, off=0) : 0                               
  16) KCMD 1 : mem=60M                     
  17) KCMD 2 : initrd=0x30800000,5M root=/dev/ram0 ramdisk=16384                                                               
  18) KCMD 3 : console=ttySAC2,115200                                    
  19) KCMD 4 : video=ezfb:panel:2                                
  20) KCMD 5 :             
  21) KCMD 6 :