net_namespace: 520 bytes00000 : "Bootloader"po


NET: Registered protocol family 16it Fl
0x000000400000-0x00000110000
S3C6410 Power Management, (c) 2008 Samsung ElectronicsE 512-Mbytes
0x000001100000-0x000020000000 : "Applica
S3C6410: Initialising architectureb
input: S

  c
ohci_hcd: USB 1.1
S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronicse bar]....bytes)4XX RTC
s3c2410-ohci s3c2410-ohci: S3C24XX OHCICLK
Total 32 DMA channels will be initialized.0-ohci s3c2410-ohci: new USB bus registere
bio: create slab <bio-0> at 03c2
kernel command [EZBOOT me
SCSI subsystem initializedtdblock2 r
s3c2410-ohci s3
usbcore: registered new interface driver usbfsr, (c) 2008 Samsung Electronics
  
onsole
usb
usbcore: registered new interface driver hub0=172.16.1.20 mac=00:FA:0eder IPv4 tunnel
s3
usbcore: registered new device driver usb0), rate is 9
hub 1-0:1.0: 2 ports detect
cfg80211: Using static regulatory domain info_otghcd: S3C6410 OTGHCDis 96000000ol family

cfg80211: Regulatory                    
TCP cubic
TCP reno registeredB2: map_video_m
s3c
NET: Registered protocol family 1gistered s3c as rtc0and
0x
RPC: R
S3C64XX ADC driver, (c) 2008 Samsung Electronics/dev entries driveris 96000000eered tcp tr
s3c24
S3C64XX ADC driver successfully probed0: source is mout_epll (0), rate is 96
ashmem: initialized s3c2440-i2c.0: bus
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).is 96000000f233000 size
s3c2440-i2c s3c2440-i2c.0: i2c-0
yaffs Jun  6 2012 22:1                   
Window[0] - FB1: map_video_memory: clear ff000000:00177000s: source is mout
s3c-sdhci s3c-sdhci.0: clock source 1: h
            FB1: map_video_memory: dma=57200000 cpu=ff000000 size=00177000ate
s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (96000000 Hz)00
Built 1
Window[0] - FB2: map_video_memory: clear ff0bb800:000bb800HCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMAB
            FB2: map_video_memory: dma=572bb800 cpu=ff0bb800 size=000bb800ux Sound Architecture Driver Version 1.0.18a. <bio-0> at 0I Nov  3 201
  
            FB1: map_video_memory: dma=57400000 cpu=ff177000 size=000bb800RE over IPv4 tunneling drivery Ker
hub 1-0:1.
cfg8021

PID
TCP cubic regi
Window[1] - FB2: map_video_memory: clear ff1d4c00:0005dc0017ersion magi
ASIX AX8
Console: colo
RPC: Registered udp t
            FB2: map_video_memory: dma=5745dc00 cpu=ff1d4c00 size=0005dc00ransport module. cache hash table entries: 16384 (ord
lib80211: common rou
fb1: s3cfb frame buffer deviceedia mode is autosense
AX8879

Window[2] - FB1: map_video_memory: clear ff233000:000bb800re 1 part 20 variant b rev 5ux video capture interface: v2
            FB1: map_video_memory: dma=57500000 cpu=ff233000 size=000bbys: invalid date/timecode, 45g U
init: untracked pid                 
nbd: registered device at major 43 preempt mod_unload ARMv6 ' should
usbcore: registered new interface driver ubgw=172.16.1.1 host=172.16.1.59 nandp
 be '2
ASIX AX88796B Ethernet Adapter:v2.1.0 22:20:00 Jun  6 2012, (600 mBi,
AX88796B:  The media mode is autosense.n
usb u
  http://www.asix.com.twsen fr

init: untracked
AX88796B: MAC ADDRESS  00 fa 01 a5 20 00 2300
init: untracked pid 1815 exitedio
AX88796B:  found at 0x8000000, using IRQ 111.id 1826 exited- 5230000 KHz @ 40000 KHz), (60
Linux video capture interface: v2.00
s3c-sdh
S3C_LCD clo
usbco
init: cri
Driver 'sd' needs updating - please use bus_type met0 KHz                              
            
hub 1-0:1.0: USB hub found.20 mac=00:FA:0een set to
hub 1-0:1.0: 2 ports detectedalg: No test for stdrng (krng
s3c_otghcd s3c_otghcd: S3C6410 OTGHCD255.0 gw=172.16.1.1 host=172.16.1.59
s3c_otghcd s3c_otghcd: new USB bus registered, assigned bus number 2410-wdt s3c2410-w
io schedu
95 ]eadl
Uncompressing Linux............
s3c_otghcd s3c_otghcd: irq 90, io mem 0x7c000000lt)st
yaffs: passed

sdhci: Secure Digi
S3C_LCD
usb usb2: configuration #1 chosen from 1 choice...............................................
hub 2-0:1.0: USB hub found0:00177000), rate is 66500
hub 2-0:1.0: 1 port detectedk source 0: h
 
...........
Initializing USB Mass Storage driver...nel.00 size=00177000Mem
s3c-sdhci s3c-s
usbcore: registered new interface driver usb-storageot@ubuntu) (gcc ve: map_video_memor              
 
s3c2440-i2c s3c2440-i2c.0: slave address 0x10AX88
mmc_bus: source is mout_epll (0), rate i
s3c2440-i2c s3c2440-i2c.0: bus frequency set to 377 KHzeddo
mmc_bus: source is mout_epll (0), rate is 96000000
s3c2440-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
mmc_bus: source is mout_epll (0), rate is 960000
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
usb-host-bus: source is mout_epll (0), rate is 960
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabledce is dout_mpll (1), rate is 66500000ideo_memory: clear ff3ab000:000bb8
sdhci: Secure Digital Host Controller Interface drivers 96000000        FB1: map_video_memory: dma=57700000
sdhci: Copyright(c) Pierre Ossmanl (0), rate is 96000000rectable e
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)s mout_epll (0), rate is 96000000e
s3c6400-uart.0: ttySAC0
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz)), rate is 96000000d protocol
block 1846 is badora   
   
fs2 console=
WM9713/WM9714 SoC Audio Codec 0.15ezpanel=3  ip0=172.16.1.20 mac=00n
asoc: AC97 HiFi <-> s3c64xx-ac97 mapping okace driver usbfslock2 r
usbcore: re
:FA:01:
ALSA device list:55.255.255.0 gw=1
  #0: SMDK6400 (WM9713)59 nandparts=4AX88796B
IPv4 over IPv4 tunneling driver Jun  6 2012e
sh-4.0# s3c_mfc:
GRE over IPv4 tunneling driver boot option `/init.rc': ignor
TCP cubic registeredomain
AX88796B: MAC
NET: Registered protocol family 17er: 9, 2048 bytes)-falinux mod_u
A
RPC: Registered udp transport module.sole: colour dummy device 80x30a mode
RPC: Registered tcp transpc
                     
s3c-nand: ECC uncorrectable error detectedes: 512h command 'recovery'.supp
0x0000004
s3c-nand: ECC uncorrectable error detectedT V2.4.10 (FALINUX Co.,Ltd) ......EZ
net_n
s3c-nand: ECC uncorrectable error detected
NET: Registered protocol family 16es/p
cf
s3c-nand: ECC uncorrectable error detectedanagement, (c) 2008 Samsung Electronicsgis
block 796 is badmily 2S3C
Ok! f

block 1645 is bad
S3C6410: Initial
block 1846 is bad    

         
init: untracked pid 1815 exited transpo
s
USB Mass Storage sup
init: untracked pid 1816 exited - 5210000 KHz @ 40000 KHz), (6
init: untracked pid 1829 exitede.................... rat
sdhci
init: untracked pid 1830 exited5210000 KHz - 5230000 KHz @ 400
init: critical process 'servicemanager' exited 4 times in 4 minutes; rebooting i0bb800 s3c2410
        (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300
nto recovery modedriver, (c) 2008
s3c_otghcd s3c_otghcd: HC died; cleaning up  (5735000 KHz - 5835000 KHz @ 40000 KHz),
Restarting system with command 'recovery'.ARMv6-compatible processor [410fb766] re
i

WELCOME EZBOOT V2.4.10 (FALINUX Co.,Ltd) ......EZ-S3C6410(128MB)-HWECC (666MHz)ET: Registered protocol family 224XX RTC, (c) 2004,2006 Simtec El
IP route cach
Program by You Young-chang, Oh Jae-Kyong, Jang Hyung-Gick irq 34, alarm irq 92Machine: EZS3C6410ture
Console:
-----------------------------------------

 

ez-s3c6410보드 사용중입니다.

 

강의 중에 안드로이드 커널 설정하는 것도 보고 그대로 따라 했는데 안되네요.

KCMD도 변경해봤는데도 똑같네요.

 

그리고 커널을 ./make_s3c6410.sh로 만들었는데 make menuconfig에서 설정한 값들이 다시 make menucofig로 들어가보면 초기화 되있던데 커널은 잘 만들어진건가요?

이 게시물을...