강좌 & 팁
글 수 2,412
2015.11.02 16:00:38 (*.39.166.80)
45438
아래와 같이 GPT 에러가 발생할 경우 대처 방법입니다.
[에러]
root@kailink-XPS-15-9530:os# fdisk /dev/sdc
Welcome to fdisk (util-linux 2.25.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
GPT PMBR size mismatch (25165823 != 1953525166) will be corrected by w(rite).
GPT PMBR size mismatch (25165823 != 1953525166) will be corrected by w(rite).
Command (m for help): w
GPT PMBR size mismatch (25165823 != 1953525166) will be corrected by w(rite).
fdisk: failed to write disklabel: 부적절한 인수
[해결방법]
root@kailink-XPS-15-9530:os# parted /dev/sdc
GNU Parted 3.2
Using /dev/sdc
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
Warning: Not all of the space available to /dev/sdc appears to be used, you can fix the GPT to use all of the space (an extra 1928359343 blocks) or continue with the current setting?
Fix/Ignore? F
Model: Seagate USB 3.0 Cable (scsi)
Disk /dev/sdc: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 106MB 105MB fat16 EFI System Partition boot, esp
2 106MB 525MB 419MB ext4 Linux filesystem
3 525MB 2622MB 2097MB Linux swap
4 2622MB 12.5GB 9857MB ext4 Linux filesystem
(parted) quit
[확인하기]
root@kailink-XPS-15-9530:os# fdisk /dev/sdc
Welcome to fdisk (util-linux 2.25.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/sdc: 931.5 GiB, 1000204885504 bytes, 1953525167 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 86E515FD-0958-4B42-A67B-6091C5D792BA
Device Start End Sectors Size Type
/dev/sdc1 2048 206847 204800 100M EFI System
/dev/sdc2 206848 1026047 819200 400M Linux filesystem
/dev/sdc3 1026048 5122047 4096000 2G Linux swap
/dev/sdc4 5122048 24373247 19251200 9.2G Linux filesystem
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.