X5 [re] 장형기님께 ^^
2005.09.16 01:22
잘됩니다...^^ 고맙습니다..
근데 왜 개구리 화면 나오는 jtag 프로그램은 다운 로드 안되네요...
답변 정말 감사드리고요..걱정 많이 했었는데 공학제 준비 잘할수 있을 것 같네요...
그런데 4메가 약간 넘거든요....램디스크 이미지는 >tfr 실행시 이상 없이 받아 집니다...
----------------------------------------------------------------
그ARP PACKET Error
ARP PACKET Resive
HOST MAC : [ 00 D0 B7 7D 63 68 ]
HOST IP : [203.244.144.184]
LOCAL IP : [203.244.144.199]
Resive Address : A100-0000
TFTP Request Send
OPTION [timeout 120 tsize 4065207]
ALL DATA RESIVE OK [ 4065207 bytes ]
Erase : OK
Write : OK
Verify: OK
EZBOOT>
------------------------------
---> 리셋누르고 재 부팅
Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar].
Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel [MARCH 303]...
Uncompressing Linux..................................................... done, .
Linux version 2.4.19-rmk7-pxa1 (root@localhost) (gcc version 3.2.1) #425 목 8월5
CPU: XScale-PXA255 revision 6
Machine: WWW.FALINUX.COM EZ-X5 for PXA255 Board
Ignoring unrecognised tag 0x00000000
Memory clock: 99.53MHz (*27)
Run Mode clock: 398.13MHz (*4)
Turbo Mode clock: 398.13MHz (*1.0, inactive)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: y initrd=0xa0800000,4M root=/dev/ram ramdisk=10240 consol5
Console: colour dummy device 80x30
Calibrating delay loop... 397.31 BogoMIPS
Memory: 64MB = 64MB total
Memory: 58908KB available (1416K code, 298K data, 68K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Using PXA255 frequency points.
Registering CPU frequency change support.
CPU clock: 398.131 MHz (99.000-400.000 MHz)
Starting kswapd
I2C: PXA algorithm module loaded.
I2C: Adding PXA-I2C-Adapter.
i2c-dev.o: Registered 'PXA-I2C-Adapter' as minor 0
I2C: Scanning bus (68)
I2C: Successfully added bus
Console: switching to colour frame buffer device 80x30
LCD resolution 640x480
initialize_kbd: Keyboard interface failed self test
Detected PS/2 Mouse Port.
PS2 Keyboard base:0xf1100000, irq:31 (gpio-8)
pty: 256 Unix98 ptys configured
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0x0000 (irq = 15) is a PXA UART
ttyS01 at 0x0000 (irq = 14) is a PXA UART
ttyS02 at 0x0000 (irq = 13) is a PXA UART
mk712 device OK!
I2C: DS1307 RTC driver successfully loaded
eth0: cs8900 rev K Base 0xF1000300<6>, IRQ 44, MAC 00:A2:55:F2:26:25
RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
loop: loaded (max 8 devices)
Linux video capture interface: v1.00
SCSI subsystem driver Revision: 1.00
ac97_codec: AC97 Audio codec, id: 0x4352:0x5973 (Cirrus Logic CS4202)
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB 3,3V)
Creating 3 MTD partitions on "NAND 64MB 3,3V":
0x00000000-0x00100000 : "EZ-X5 Kernel partition"
0x00100000-0x00500000 : "EZ-X5 Ramdisk partition"
0x00500000-0x04000000 : "EZ-X5 Data partition 0"
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/sl811.c: v0.30 : Sl811 USB Host Controller Alternate Driver
usb.c: new USB bus registered, assigned bus number 1
host/sl811.c: USB SL811 at f2000000,f2000004, IRQ 35
hub.c: USB hub found
hub.c: 1 port detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
invalid compressed format (err=2)<6>Freeing initrd memory: 4096K
VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 68K
init: /usr/arm-linux/lib/libc.so.6: unsupported version 0 of VerdeKernel panic:!
f record
init: /usr/arm-linux/lib/libc.so.6: unsupported versio n 0 of Verdef record
init: /usr/arm-linux/lib/libc.so.6: unsupported version 0 of Verdef record
init: /usr/arm-linux/lib/libc.so.6: unsupported version 0 of Verdef record
init: error while loading shared libraries: /usr/arm-linux/lib/libc.so.6: unsupd
근데 왜 개구리 화면 나오는 jtag 프로그램은 다운 로드 안되네요...
답변 정말 감사드리고요..걱정 많이 했었는데 공학제 준비 잘할수 있을 것 같네요...
그런데 4메가 약간 넘거든요....램디스크 이미지는 >tfr 실행시 이상 없이 받아 집니다...
----------------------------------------------------------------
그ARP PACKET Error
ARP PACKET Resive
HOST MAC : [ 00 D0 B7 7D 63 68 ]
HOST IP : [203.244.144.184]
LOCAL IP : [203.244.144.199]
Resive Address : A100-0000
TFTP Request Send
OPTION [timeout 120 tsize 4065207]
ALL DATA RESIVE OK [ 4065207 bytes ]
Erase : OK
Write : OK
Verify: OK
EZBOOT>
------------------------------
---> 리셋누르고 재 부팅
Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar].
Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel [MARCH 303]...
Uncompressing Linux..................................................... done, .
Linux version 2.4.19-rmk7-pxa1 (root@localhost) (gcc version 3.2.1) #425 목 8월5
CPU: XScale-PXA255 revision 6
Machine: WWW.FALINUX.COM EZ-X5 for PXA255 Board
Ignoring unrecognised tag 0x00000000
Memory clock: 99.53MHz (*27)
Run Mode clock: 398.13MHz (*4)
Turbo Mode clock: 398.13MHz (*1.0, inactive)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: y initrd=0xa0800000,4M root=/dev/ram ramdisk=10240 consol5
Console: colour dummy device 80x30
Calibrating delay loop... 397.31 BogoMIPS
Memory: 64MB = 64MB total
Memory: 58908KB available (1416K code, 298K data, 68K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Using PXA255 frequency points.
Registering CPU frequency change support.
CPU clock: 398.131 MHz (99.000-400.000 MHz)
Starting kswapd
I2C: PXA algorithm module loaded.
I2C: Adding PXA-I2C-Adapter.
i2c-dev.o: Registered 'PXA-I2C-Adapter' as minor 0
I2C: Scanning bus (68)
I2C: Successfully added bus
Console: switching to colour frame buffer device 80x30
LCD resolution 640x480
initialize_kbd: Keyboard interface failed self test
Detected PS/2 Mouse Port.
PS2 Keyboard base:0xf1100000, irq:31 (gpio-8)
pty: 256 Unix98 ptys configured
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0x0000 (irq = 15) is a PXA UART
ttyS01 at 0x0000 (irq = 14) is a PXA UART
ttyS02 at 0x0000 (irq = 13) is a PXA UART
mk712 device OK!
I2C: DS1307 RTC driver successfully loaded
eth0: cs8900 rev K Base 0xF1000300<6>, IRQ 44, MAC 00:A2:55:F2:26:25
RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
loop: loaded (max 8 devices)
Linux video capture interface: v1.00
SCSI subsystem driver Revision: 1.00
ac97_codec: AC97 Audio codec, id: 0x4352:0x5973 (Cirrus Logic CS4202)
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB 3,3V)
Creating 3 MTD partitions on "NAND 64MB 3,3V":
0x00000000-0x00100000 : "EZ-X5 Kernel partition"
0x00100000-0x00500000 : "EZ-X5 Ramdisk partition"
0x00500000-0x04000000 : "EZ-X5 Data partition 0"
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/sl811.c: v0.30 : Sl811 USB Host Controller Alternate Driver
usb.c: new USB bus registered, assigned bus number 1
host/sl811.c: USB SL811 at f2000000,f2000004, IRQ 35
hub.c: USB hub found
hub.c: 1 port detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
invalid compressed format (err=2)<6>Freeing initrd memory: 4096K
VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 68K
init: /usr/arm-linux/lib/libc.so.6: unsupported version 0 of VerdeKernel panic:!
f record
init: /usr/arm-linux/lib/libc.so.6: unsupported versio n 0 of Verdef record
init: /usr/arm-linux/lib/libc.so.6: unsupported version 0 of Verdef record
init: /usr/arm-linux/lib/libc.so.6: unsupported version 0 of Verdef record
init: error while loading shared libraries: /usr/arm-linux/lib/libc.so.6: unsupd
