X5 [re] 자료실에서 다운받은 부트,커널,램디스크 를 올리면 이렇게 됨니다

안녕하세요..

자료실의 어디에 있는 자료를 받으셨나요???

linux-2.4.19-x5-v07.tar.tar 커널이 3.3.4에서 크로스컴파일된 커널이라면 ARM GCC 3.3.4 용 램디스크를 다운받아서 사용해야 합니다.

linux-2.4.19-x5-v07.tar.tar 커널이 3.2.1에서 크로스컴파일된 커널이라면 ARM GCC 3.2.1 용 램디스크를 다운받아서 사용해야 합니다.

램디스크를 잘못 받아서 올리신것 같습니다.

그럼 수고하세요..





>자료실에 있는
>ezboot.x5.v18.tar.tar
>linux-2.4.19-x5-v07.tar.tar
>ramdisk-3.4.3.tar.tar
>를 다운받았고 EZ-X5 V1.1 보드에 올리면
>
>
>WELCOME EZBOOT.X5 V1.8...................for PXA255
>Program by You Young-chang, fooji (FALinux Co.,Ltd)
>Last Modify Jul  1 2006
>
>Boot Flash Check ......................
>  Detect MX29LV400 (TOP)Flash : 22B9
>  SIZE 4M-BIT [512Kbyte]
>
>NAND Chip Check .......................
>  Detect SAMSUNG [ec:76] 64MByte
>  BAD BLOCK SCAN ->  Kernel, Ramdisk Bad Block [1]
>
>CS8900 Init............................
>  Mac Address  : [00 A2 55 F2 26 25]
>  Detect value : [3000:3000]
>  Chip ID      : [0E63:000A]
>
>Quickly Autoboot [ENTER]  Goto BOOT-MENU press [space bar].....
>Copy Kernel Image .....
>Copy Ramdisk Image .....
>Starting kernel [MARCH 303]...
>Uncompressing Linux............................................... done, booting the kernel.
>
>Linux version 2.4.19-rmk7-pxa1 (root@yjpc) (gcc version 3.2.1) #273 화 9월 14 12:49:32 KST 2004
>
>CPU: XScale-PXA255 revision 6
>
>Machine: WWW.FALINUX.COM EZ-X5 for PXA255 Board
>
>Ignoring unrecognised tag 0x00000000
>
>Memory clock: 99.53MHz (*27)
>
>Run Mode clock: 398.13MHz (*4)
>
>Turbo Mode clock: 398.13MHz (*1.0, inactive)
>
>On node 0 totalpages: 16384
>
>zone(0): 16384 pages.
>
>zone(1): 0 pages.
>
>zone(2): 0 pages.
>
>Kernel command line: y  initrd=0xa0800000,5M root=/dev/ram ramdisk=12288 console=ttyS02,115200  ip0=192.168.0.155 nandparts=1,5,58 arch=EZ-X5
>
>Console: colour dummy device 80x30
>
>Calibrating delay loop... 397.31 BogoMIPS
>
>Memory: 64MB = 64MB total
>
>Memory: 58096KB available (1222K code, 281K data, 64K init)
>
>Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
>
>Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
>
>Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
>
>Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
>
>Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
>
>POSIX conformance testing by UNIFIX
>
>Linux NET4.0 for Linux 2.4
>
>Based upon Swansea University Computer Society NET3.039
>
>Initializing RT netlink socket
>
>Using PXA255 frequency points.
>
>Registering CPU frequency change support.
>
>CPU clock: 398.131 MHz (99.000-400.000 MHz)
>
>Starting kswapd
>
>Console: switching to colour frame buffer device 80x30
>
>LCD resolution 640x480
>
>pty: 256 Unix98 ptys configured
>
>Serial driver version 5.05c (2001-07-08) with no serial options enabled
>
>ttyS00 at 0x0000 (irq = 15) is a PXA UART
>
>ttyS01 at 0x0000 (irq = 14) is a PXA UART
>
>ttyS02 at 0x0000 (irq = 13) is a PXA UART
>
>mk712 device OK!
>
>eth0: cs8900 rev K Base 0xF1000300<6>, IRQ 44, MAC 00:A2:55:F2:26:25
>
>RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
>
>loop: loaded (max 8 devices)
>
>NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB 3,3V)
>
>Creating 3 MTD partitions on "NAND 64MB 3,3V":
>
>0x00000000-0x00100000 : "EZ-X5 Kernel partition"
>
>0x00100000-0x00600000 : "EZ-X5 Ramdisk partition"
>
>0x00600000-0x04000000 : "EZ-X5 Data partition 0"
>
>NET4: Linux TCP/IP 1.0 for NET4.0
>
>IP Protocols: ICMP, UDP, TCP
>
>IP: routing cache hash table of 512 buckets, 4Kbytes
>
>TCP: Hash tables configured (established 4096 bind 8192)
>
>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>
>NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
>
>RAMDISK: Compressed image found at block 0
>
>Freeing initrd memory: 5120K
>
>VFS: Mounted root (ext2 filesystem) readonly.
>
>Freeing init memory: 64K
>
>FATAL: kernel too old
>
>Kernel panic: Attempted to kill init!