안녕하세요...

EZ-X5 보드에 포팅이 되어 있습니다..

혹시 보드를 새로 만드셨나요????

새로 보드를 만드셨다면

커널쏘스중에서(drivers/char/mk712.c)
:
: #if defined(CONFIG_ARCH_PXA_EZ_X5)
: #define MK712_DEFAULT_IO 0xf1300000
: #define MK712_DEFAULT_IRQ IRQ_GPIO(22)
: #define MK712_DEFAULT_GPIO_IRQ 22
: #endif

이 부분을 수정해 주셔야 합니다..

그럼 수고하세요..



전보성 wrote..
: 터치스크린을 작동 시키려고 하는데요...
:
: 부팅시 메세지 입니다.
: --------------------------------------------------------------------
: Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
: Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
: POSIX conformance testing by UNIFIX
: Linux NET4.0 for Linux 2.4
: Based upon Swansea University Computer Society NET3.039
: Initializing RT netlink socket
: Using PXA255 frequency points.
: Registering CPU frequency change support.
: CPU clock: 398.131 MHz (99.000-400.000 MHz)
: Starting kswapd
: Console: switching to colour frame buffer device 80x30
: LCD resolution 640x480
: pty: 256 Unix98 ptys configured
: mk712 device OK!
: Serial driver version 5.05c (2001-07-08) with no serial options enabled
: ttyS00 at 0x0000 (irq = 15) is a PXA UART
: ttyS01 at 0x0000 (irq = 14) is a PXA UART
: ttyS02 at 0x0000 (irq = 13) is a PXA UART
: mk712: unable to get IRQ
: eth0: cs8900 rev J Base 0xF1000300<6>, IRQ 44, MAC 00:A2:55:F2:26:25
: RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
: loop: loaded (max 8 devices)
: NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB 3,3V)
: Creating 3 MTD partitions on "NAND 64MB 3,3V":
: 0x00000000-0x00100000 : "EZ-X5 Kernel partition"
: 0x00100000-0x00400000 : "EZ-X5 Ramdisk partition"
: 0x00400000-0x04000000 : "EZ-X5 Data partition 0"
: NET4: Linux TCP/IP 1.0 for NET4.0
: IP Protocols: ICMP, UDP, TCP
: IP: routing cache hash table of 512 buckets, 4Kbytes
: TCP: Hash tables configured (established 2048 bind 4096)
: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
: NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
: RAMDISK: Compressed image found at block 0
: Freeing initrd memory: 5120K
: VFS: Mounted root (ext2 filesystem) readonly.
: Freeing init memory: 64K
: INIT: version 2.84 booting
: INIT: Entering runlevel: 3
: yaffs: dev is 7938 name is "1f:02"
: Starting system logger: syslogd
: Starting INET services: inetd31 MHz (99.000-400.000 MHz)
: Starting kswapd
: Console: switching to colour frame buffer device 80x30
: LCD resolution 640x480
: pty: 256 Unix98 ptys configured
: * -> mk712 device OK!
: Serial driver version 5.05c (2001-07-08) with no serial options enabled
: ttyS00 at 0x0000 (irq = 15) is a PXA UART
: ttyS01 at 0x0000 (irq = 14) is a PXA UART
: ttyS02 at 0x0000 (irq = 13) is a PXA UART
: *-> mk712: unable to get IRQ
: eth0: cs8900 rev J Base 0xF1000300<6>, IRQ 44, MAC 00:A2:55:F2:26:25
: RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
: loop: loaded (max 8 devices)
: NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB 3,3V)
: Creating 3 MTD partitions on "NAND 64MB 3,3V":
: 0x00000000-0x00100000 : "EZ-X5 Kernel partition"
: 0x00100000-0x00400000 : "EZ-X5 Ramdisk partition"
: 0x00400000-0x04000000 : "EZ-X5 Data partition 0"
: NET4: Linux TCP/IP 1.0 for NET4.0
: IP Protocols: ICMP, UDP, TCP
: IP: routing cache hash table of 512 buckets, 4Kbytes
: TCP: Hash tables configured (established 2048 bind 4096)
: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
: NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
: RAMDISK: Compressed image found at block 0
: Freeing initrd memory: 5120K
: VFS: Mounted root (ext2 filesystem) readonly.
: Freeing init memory: 64K
: INIT: version 2.84 booting
: INIT: Entering runlevel: 3
: yaffs: dev is 7938 name is "1f:02"
: Starting system logger: syslogd
: Starting INET services: inetd
: ----------------------------------------------------
:
: mk712: unable to get IRQ 로 보아서는
:
: 커널쏘스중에서(drivers/char/mk712.c)
:
: #if defined(CONFIG_ARCH_PXA_EZ_X5)
: #define MK712_DEFAULT_IO 0xf1300000
: #define MK712_DEFAULT_IRQ IRQ_GPIO(22)
: #define MK712_DEFAULT_GPIO_IRQ 22
: #endif
: 이부분을 바꿔줘야 하나요?