도와주세요!!
2002.09.27 09:58:48 (*.121.228.82)
8350
수고하십니다.
첨부하신 boot loader를 잘 받아 설치하였습니다. 감사합니다....
그런데 아무래도 제 보드에서는 Mac 주소가 안 잡히는 군요.
중간에 (RTC가 초기화 되지 않았다)는 경고 메세지도 보이는 군요
혹시, 이것이 문제인지요!!!!
귀챦으시겠지만 제 보드의 출력 메세지를 첨부해 봅니다.
시간 있으실 때 한번 살펴 봐 주시면 감사하겠습니다.
(1)의 경우는 주신 EZBOOT.v21과 CD ROM의 zImage를 이용한 경우이고,
(2)의 경우는 주신 EZBOOT.v21과 Wow Linux 7.1에서 kernel 수정 없이 그냥
컴파일 해서 만든 zImage를 이용한 경우 입니다.
제 생각에는 동일한 것 같습니다만...
미리 감사
(추신) 보드를 약 3주전쯤에 산 후 추가적으로 건드린것은 전혀 없습니다.
------------------------------------------------------
(1)첨부하신 EZBOOT.v21과 CD rom에서의 zImage를 Flash Mem에 Load하여
Booting한 결과
WELCOME EZBOOT Ver 2.1.............................
02-04-30 ezboard.h modify
Program By You Young-chang, fooji ( J.D&T Co.,Ltd )
Last Modify 2002.07.23
Flash Information:
'Intel 3V StrataFlash 28F128J3A' detected at 00000000.
Total size is 16MB(128Mb * 1)
CS8900 Init...............
CS8900 Mac Address : [10 10 1C 17 BC 11]
CS8900 DECTECT VALUE : [00003000]
CS8900 INIT OK!!!
Copy Image ...
Starting kernel ...
Uncompressing Linux...
.......................................... done, booting the kernel.
Linux version 2.4.10-ac11-rmk1-np1-ez1 (root@jdt) (gcc version 2.95.2
20000313
Processor: Intel StrongARM-1110 revision 8
Architecture: EZBOARD
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: keepinitrd
Warning: uninitialized Real Time Clock
Calibrating delay loop... 147.04 BogoMIPS
Memory: 32MB = 32MB total
Memory: 26556KB available (1210K code, 270K data, 48K init)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis
Communications AB.
pty: 256 Unix98 ptys configured
block: queued sectors max/low 17557kB/5852kB, 64 slots per queue
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
eth0: cs8900 rev J Base 0xF0000300<6>, IRQ 47, MAC 00:00:00:00:00:00
SA1100 flash: probing 16-bit flash bus
Using static partition definition
Creating 3 MTD partitions on "SA1100 flash":
0x00000000-0x00100000 : "Loader+Kernel"
0x00100000-0x00400000 : "Initrd"
0x00400000-0x01000000 : "file System"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 48K
INIT: version 2.74 booting
INIT: Entering runlevel: 3
Starting system logger: syslogd
Starting INET services: inetd
Welcom to J.D&T EZBOARD.
ezboard login: root
Password:
[root@ezboard /root]$
------------------------------------------------------
(2)첨부하신 EZBOOT.v21과 Wow Linux 7.1에서 커널옵션 변경 없이 zImage를 만
들어 Booting한 결과
WELCOME EZBOOT Ver 2.1.............................
02-04-30 ezboard.h modify
Program By You Young-chang, fooji ( J.D&T Co.,Ltd )
Last Modify 2002.07.23
Flash Information:
'Intel 3V StrataFlash 28F128J3A' detected at 00000000.
Total size is 16MB(128Mb * 1)
CS8900 Init...............
CS8900 Mac Address : [10 10 1C 17 BC 11]
CS8900 DECTECT VALUE : [00003000]
CS8900 INIT OK!!!
Copy Image ...
Starting kernel ...
Uncompressing Linux...
.......................................... done, booting the kernel.
Linux version 2.4.10-ac11-rmk1-np1-ez1 (root@localhost.localdomain) (gcc
versio
Processor: Intel StrongARM-1110 revision 8
Architecture: EZBOARD
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: keepinitrd
Warning: uninitialized Real Time Clock
Calibrating delay loop... 147.04 BogoMIPS
Memory: 32MB = 32MB total
Memory: 26572KB available (1194K code, 269K data, 48K init)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis
Communications AB.
pty: 256 Unix98 ptys configured
block: queued sectors max/low 17568kB/5856kB, 64 slots per queue
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
eth0: cs8900 rev J Base 0xF0000300<6>, IRQ 47, MAC 00:00:00:00:00:00
SA1100 flash: probing 16-bit flash bus
Using static partition definition
Creating 3 MTD partitions on "SA1100 flash":
0x00000000-0x00100000 : "Loader+Kernel"
0x00100000-0x00400000 : "Initrd"
0x00400000-0x01000000 : "file System"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 48K
INIT: version 2.74 booting
INIT: Entering runlevel: 3
Starting system logger: syslogd
Starting INET services: inetd
Welcom to J.D&T EZBOARD.
ezboard login: root
Password:
[root@ezboard /root]$
장형기 wrote..
: 안녕하세요..
:
: 파일을 다운 받아 이지보드에 다시 올려서 한번 해 보세요.
:
: 그럼 좋은 하루 되세요...
첨부하신 boot loader를 잘 받아 설치하였습니다. 감사합니다....
그런데 아무래도 제 보드에서는 Mac 주소가 안 잡히는 군요.
중간에 (RTC가 초기화 되지 않았다)는 경고 메세지도 보이는 군요
혹시, 이것이 문제인지요!!!!
귀챦으시겠지만 제 보드의 출력 메세지를 첨부해 봅니다.
시간 있으실 때 한번 살펴 봐 주시면 감사하겠습니다.
(1)의 경우는 주신 EZBOOT.v21과 CD ROM의 zImage를 이용한 경우이고,
(2)의 경우는 주신 EZBOOT.v21과 Wow Linux 7.1에서 kernel 수정 없이 그냥
컴파일 해서 만든 zImage를 이용한 경우 입니다.
제 생각에는 동일한 것 같습니다만...
미리 감사
(추신) 보드를 약 3주전쯤에 산 후 추가적으로 건드린것은 전혀 없습니다.
------------------------------------------------------
(1)첨부하신 EZBOOT.v21과 CD rom에서의 zImage를 Flash Mem에 Load하여
Booting한 결과
WELCOME EZBOOT Ver 2.1.............................
02-04-30 ezboard.h modify
Program By You Young-chang, fooji ( J.D&T Co.,Ltd )
Last Modify 2002.07.23
Flash Information:
'Intel 3V StrataFlash 28F128J3A' detected at 00000000.
Total size is 16MB(128Mb * 1)
CS8900 Init...............
CS8900 Mac Address : [10 10 1C 17 BC 11]
CS8900 DECTECT VALUE : [00003000]
CS8900 INIT OK!!!
Copy Image ...
Starting kernel ...
Uncompressing Linux...
.......................................... done, booting the kernel.
Linux version 2.4.10-ac11-rmk1-np1-ez1 (root@jdt) (gcc version 2.95.2
20000313
Processor: Intel StrongARM-1110 revision 8
Architecture: EZBOARD
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: keepinitrd
Warning: uninitialized Real Time Clock
Calibrating delay loop... 147.04 BogoMIPS
Memory: 32MB = 32MB total
Memory: 26556KB available (1210K code, 270K data, 48K init)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis
Communications AB.
pty: 256 Unix98 ptys configured
block: queued sectors max/low 17557kB/5852kB, 64 slots per queue
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
eth0: cs8900 rev J Base 0xF0000300<6>, IRQ 47, MAC 00:00:00:00:00:00
SA1100 flash: probing 16-bit flash bus
Using static partition definition
Creating 3 MTD partitions on "SA1100 flash":
0x00000000-0x00100000 : "Loader+Kernel"
0x00100000-0x00400000 : "Initrd"
0x00400000-0x01000000 : "file System"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 48K
INIT: version 2.74 booting
INIT: Entering runlevel: 3
Starting system logger: syslogd
Starting INET services: inetd
Welcom to J.D&T EZBOARD.
ezboard login: root
Password:
[root@ezboard /root]$
------------------------------------------------------
(2)첨부하신 EZBOOT.v21과 Wow Linux 7.1에서 커널옵션 변경 없이 zImage를 만
들어 Booting한 결과
WELCOME EZBOOT Ver 2.1.............................
02-04-30 ezboard.h modify
Program By You Young-chang, fooji ( J.D&T Co.,Ltd )
Last Modify 2002.07.23
Flash Information:
'Intel 3V StrataFlash 28F128J3A' detected at 00000000.
Total size is 16MB(128Mb * 1)
CS8900 Init...............
CS8900 Mac Address : [10 10 1C 17 BC 11]
CS8900 DECTECT VALUE : [00003000]
CS8900 INIT OK!!!
Copy Image ...
Starting kernel ...
Uncompressing Linux...
.......................................... done, booting the kernel.
Linux version 2.4.10-ac11-rmk1-np1-ez1 (root@localhost.localdomain) (gcc
versio
Processor: Intel StrongARM-1110 revision 8
Architecture: EZBOARD
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: keepinitrd
Warning: uninitialized Real Time Clock
Calibrating delay loop... 147.04 BogoMIPS
Memory: 32MB = 32MB total
Memory: 26572KB available (1194K code, 269K data, 48K init)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis
Communications AB.
pty: 256 Unix98 ptys configured
block: queued sectors max/low 17568kB/5856kB, 64 slots per queue
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
eth0: cs8900 rev J Base 0xF0000300<6>, IRQ 47, MAC 00:00:00:00:00:00
SA1100 flash: probing 16-bit flash bus
Using static partition definition
Creating 3 MTD partitions on "SA1100 flash":
0x00000000-0x00100000 : "Loader+Kernel"
0x00100000-0x00400000 : "Initrd"
0x00400000-0x01000000 : "file System"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 48K
INIT: version 2.74 booting
INIT: Entering runlevel: 3
Starting system logger: syslogd
Starting INET services: inetd
Welcom to J.D&T EZBOARD.
ezboard login: root
Password:
[root@ezboard /root]$
장형기 wrote..
: 안녕하세요..
:
: 파일을 다운 받아 이지보드에 다시 올려서 한번 해 보세요.
:
: 그럼 좋은 하루 되세요...
