도와주세요!!
2002.10.01 16:10:37 (*.134.65.65)
8350
ramdisk를 수정..zmodem을 통해 다운 받고 flash에 fusing 후에
부팅을 시켰는데..커널이안뜨네여...
어케해야 되져?
현재 부트로더에서 flash의 ramdisk위치는 0x00200000 으로 설정 되어있습니
다..
타켓 부팅 시 메세지는 다음과 같습니다...좀 도와주세요..
==================================================
Copy Image ...
Starting kernel ...
Uncompressing Linux................................................
done, booti.
Linux version 2.4.18-rmk7-ez1 (root@comm31.gwu.ac.kr) (gcc version
2.95.2 200002
CPU: Intel StrongARM-1110 revision 8
Machine: EZBOARD
Security risk: creating user accessible mapping for 0x00000000 at
0xe8000000
Security risk: creating user accessible mapping for 0x10000000 at
0xf0000000
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: keepinitrd
Warning: uninitialized Real Time Clock
Calibrating delay loop... 147.04 BogoMIPS
Memory: 32MB = 32MB total
Memory: 26520KB available (1286K code, 253K data, 56K init)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
JFFS version 1.0, (C) 1999, 2000 Axis Communications AB
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis
Communications AB.
ttySA0 at MEM 0x80050000 (irq = 17) is a SA1100
pty: 256 Unix98 ptys configured
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
eth0: cs8900 rev I Base 0xF0000300<6>, IRQ 47, MAC 00:D0:CA:F1:26:25
SA1100 flash: probing 16-bit flash bus
Using buffer write method
Using static partition definition
Creating 3 MTD partitions on "SA1100 flash":
0x00000000-0x00100000 : "Loader+Kernel"
0x00100000-0x00400000 : "Initrd"
0x00400000-0x01000000 : "file System"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack (256 buckets, 2048 max)
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 56K
serial console detected. Disabling virtual terminals.
init started: BusyBox v0.60.1 (2001.11.06-12:25+0000) multi-call binary
Setting hostname ...
Mounting root fs rw ...
Mounting other filesystems ...
mount: Mounting none on /dev/shm failed: No such device
sysinit done
부팅을 시켰는데..커널이안뜨네여...
어케해야 되져?
현재 부트로더에서 flash의 ramdisk위치는 0x00200000 으로 설정 되어있습니
다..
타켓 부팅 시 메세지는 다음과 같습니다...좀 도와주세요..
==================================================
Copy Image ...
Starting kernel ...
Uncompressing Linux................................................
done, booti.
Linux version 2.4.18-rmk7-ez1 (root@comm31.gwu.ac.kr) (gcc version
2.95.2 200002
CPU: Intel StrongARM-1110 revision 8
Machine: EZBOARD
Security risk: creating user accessible mapping for 0x00000000 at
0xe8000000
Security risk: creating user accessible mapping for 0x10000000 at
0xf0000000
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: keepinitrd
Warning: uninitialized Real Time Clock
Calibrating delay loop... 147.04 BogoMIPS
Memory: 32MB = 32MB total
Memory: 26520KB available (1286K code, 253K data, 56K init)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
JFFS version 1.0, (C) 1999, 2000 Axis Communications AB
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis
Communications AB.
ttySA0 at MEM 0x80050000 (irq = 17) is a SA1100
pty: 256 Unix98 ptys configured
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
eth0: cs8900 rev I Base 0xF0000300<6>, IRQ 47, MAC 00:D0:CA:F1:26:25
SA1100 flash: probing 16-bit flash bus
Using buffer write method
Using static partition definition
Creating 3 MTD partitions on "SA1100 flash":
0x00000000-0x00100000 : "Loader+Kernel"
0x00100000-0x00400000 : "Initrd"
0x00400000-0x01000000 : "file System"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack (256 buckets, 2048 max)
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 56K
serial console detected. Disabling virtual terminals.
init started: BusyBox v0.60.1 (2001.11.06-12:25+0000) multi-call binary
Setting hostname ...
Mounting root fs rw ...
Mounting other filesystems ...
mount: Mounting none on /dev/shm failed: No such device
sysinit done
