도와주세요!!
2003.11.06 17:23:37 (*.230.245.173)
9384
WELCOME EZBOOT.X5 V1.1...................for
PXA255
Program by You Young-chang, fooji ( J.D&T
Co.,Ltd )
Last Modify 2003.08.02
Boot Flash
Check ..........................
Detect MX29LV800T Flash : 22DA
SIZE 8M-BIT [1Mbyte]
NAND Chip
Check ...........................
Detect SAMSUNG [ec:76] 64MByte
BAD BLOCK SCAN -> Kernel, Ramdisk Bad Block
[0]
CS8900 Init...............
CS8900 Mac Address : [00 A2 55 F2 26
25]
CS8900 DECTECT VALUE :
[00003000:00003000]
CS8900 INIT OK!!!
....
Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel ...
Uncompressing Linux............................................... done,
booting
the kernel.
Linux version 2.4.19-rmk7-pxa1 (root@jdt) (gcc version 3.2.1) #148 Tue
Oct 7
17:
01:10 KST 2003
CPU: XScale-PXA255 revision 6
Machine: WWW.FALINUX.COM EZ-X5 for PXA255
Board
Ignoring unrecognised tag 0x00000000
Check ezboot Magic Value [20030702]
Check ezboot Check String [CMD=]
Check ezboot command line [keepinitrd root=/dev/ramdisk
console=ttyS02,115200]
Memory clock: 99.53MHz (*27)
Run Mode clock: 398.13MHz (*4)
Turbo Mode clock: 398.13MHz (*1.0,
inactive)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: y keepinitrd root=/dev/ramdisk
console=ttyS02,115200
Console: colour dummy device 80x30
Calibrating delay loop... 397.31
BogoMIPS
Memory: 64MB = 64MB total
Memory: 59124KB available (1223K code, 277K data, 64K
init)
Dentry cache hash table entries: 8192 (order: 4, 65536
bytes)
Inode cache hash table entries: 4096 (order: 3, 32768
bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192
bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384
bytes)
Page-cache hash table entries: 16384 (order: 4, 65536
bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society
NET3.039
Initializing RT netlink socket
Using PXA255 frequency points.
Registering CPU frequency change
support.
CPU clock: 398.131 MHz (99.000-400.000
MHz)
Starting kswapd
I2C: PXA algorithm module loaded.
enable_irq(11) unbalanced from
c0094d70
I2C: Adding PXA-I2C-Adapter.
i2c-dev.o: Registered 'PXA-I2C-Adapter' as minor
0
I2C: Scanning bus (1a)(68)
I2C: Successfully added bus
Console: switching to colour frame buffer device
80x30
LCD resolution 640x480
initialize_kbd: Keyboard failed self
test
Keyboard timed out[1]
Keyboard timed out[1]
PS2 Keyboard base:0xf1100000, irq:29 (gpio-
6)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options
enabled
Keyboard timed out[1]
keyboard: Timeout - AT keyboard not present?
(ed)
Keyboard timed out[1]
keyboard: Timeout - AT keyboard not present?
(f4)
ttyS00 at 0x0000 (irq = 15) is a PXA
UART
ttyS01 at 0x0000 (irq = 14) is a PXA
UART
ttyS02 at 0x0000 (irq = 13) is a PXA
UART
mk712 device OK!
I2C: DS1307 RTC driver successfully
loaded
eth0: cs8900 rev J Base 0xF1000300<6>, IRQ 44, MAC
00:A2:55:F2:26:25
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024
blocksize
loop: loaded (max 8 devices)
SSP audio for EZ-X5 initialized
WM8721 DAC Initialized for EZ-X5
I2C: WM8721 driver successfully
loaded
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB 3,3V)
Creating 3 MTD partitions on "NAND 64MB 3,3V":
0x00000000-0x00100000 : "EZ-X5 Kernel partition"
0x00100000-0x00400000 : "EZ-X5 Ramdisk partition"
0x00400000-0x04000000 : "EZ-X5 Data partition 0"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
invalid compressed format (err=1)VFS: Mounted root (ext2 filesystem)
readonly.
Freeing init memory: 64K
INIT: version 2.84 booting
yaffs: dev is 7938 name is "1f:02"
INIT: Entering runlevel: 3
Starting system logger: syslogd
Starting INET services: inetd
위 내용은 제가 가지고 있는 X5보드 전원 ON후 로그인 뜨기 전까지의
내용 입니다..
ezboot는 1.1 버젼으로 업데이트 했고요
PS/2 키보드를 연결한 상태에서 전원을 ON했고요
커널과 램디스크 내용도 메뉴얼 보고 수정해서
보드에 올렸습니다...
키보드 인식이 안되는 문제 해결 방법 좀 알려 주세요..
수고 하세요
PXA255
Program by You Young-chang, fooji ( J.D&T
Co.,Ltd )
Last Modify 2003.08.02
Boot Flash
Check ..........................
Detect MX29LV800T Flash : 22DA
SIZE 8M-BIT [1Mbyte]
NAND Chip
Check ...........................
Detect SAMSUNG [ec:76] 64MByte
BAD BLOCK SCAN -> Kernel, Ramdisk Bad Block
[0]
CS8900 Init...............
CS8900 Mac Address : [00 A2 55 F2 26
25]
CS8900 DECTECT VALUE :
[00003000:00003000]
CS8900 INIT OK!!!
....
Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel ...
Uncompressing Linux............................................... done,
booting
the kernel.
Linux version 2.4.19-rmk7-pxa1 (root@jdt) (gcc version 3.2.1) #148 Tue
Oct 7
17:
01:10 KST 2003
CPU: XScale-PXA255 revision 6
Machine: WWW.FALINUX.COM EZ-X5 for PXA255
Board
Ignoring unrecognised tag 0x00000000
Check ezboot Magic Value [20030702]
Check ezboot Check String [CMD=]
Check ezboot command line [keepinitrd root=/dev/ramdisk
console=ttyS02,115200]
Memory clock: 99.53MHz (*27)
Run Mode clock: 398.13MHz (*4)
Turbo Mode clock: 398.13MHz (*1.0,
inactive)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: y keepinitrd root=/dev/ramdisk
console=ttyS02,115200
Console: colour dummy device 80x30
Calibrating delay loop... 397.31
BogoMIPS
Memory: 64MB = 64MB total
Memory: 59124KB available (1223K code, 277K data, 64K
init)
Dentry cache hash table entries: 8192 (order: 4, 65536
bytes)
Inode cache hash table entries: 4096 (order: 3, 32768
bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192
bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384
bytes)
Page-cache hash table entries: 16384 (order: 4, 65536
bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society
NET3.039
Initializing RT netlink socket
Using PXA255 frequency points.
Registering CPU frequency change
support.
CPU clock: 398.131 MHz (99.000-400.000
MHz)
Starting kswapd
I2C: PXA algorithm module loaded.
enable_irq(11) unbalanced from
c0094d70
I2C: Adding PXA-I2C-Adapter.
i2c-dev.o: Registered 'PXA-I2C-Adapter' as minor
0
I2C: Scanning bus (1a)(68)
I2C: Successfully added bus
Console: switching to colour frame buffer device
80x30
LCD resolution 640x480
initialize_kbd: Keyboard failed self
test
Keyboard timed out[1]
Keyboard timed out[1]
PS2 Keyboard base:0xf1100000, irq:29 (gpio-
6)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options
enabled
Keyboard timed out[1]
keyboard: Timeout - AT keyboard not present?
(ed)
Keyboard timed out[1]
keyboard: Timeout - AT keyboard not present?
(f4)
ttyS00 at 0x0000 (irq = 15) is a PXA
UART
ttyS01 at 0x0000 (irq = 14) is a PXA
UART
ttyS02 at 0x0000 (irq = 13) is a PXA
UART
mk712 device OK!
I2C: DS1307 RTC driver successfully
loaded
eth0: cs8900 rev J Base 0xF1000300<6>, IRQ 44, MAC
00:A2:55:F2:26:25
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024
blocksize
loop: loaded (max 8 devices)
SSP audio for EZ-X5 initialized
WM8721 DAC Initialized for EZ-X5
I2C: WM8721 driver successfully
loaded
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB 3,3V)
Creating 3 MTD partitions on "NAND 64MB 3,3V":
0x00000000-0x00100000 : "EZ-X5 Kernel partition"
0x00100000-0x00400000 : "EZ-X5 Ramdisk partition"
0x00400000-0x04000000 : "EZ-X5 Data partition 0"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
invalid compressed format (err=1)VFS: Mounted root (ext2 filesystem)
readonly.
Freeing init memory: 64K
INIT: version 2.84 booting
yaffs: dev is 7938 name is "1f:02"
INIT: Entering runlevel: 3
Starting system logger: syslogd
Starting INET services: inetd
위 내용은 제가 가지고 있는 X5보드 전원 ON후 로그인 뜨기 전까지의
내용 입니다..
ezboot는 1.1 버젼으로 업데이트 했고요
PS/2 키보드를 연결한 상태에서 전원을 ON했고요
커널과 램디스크 내용도 메뉴얼 보고 수정해서
보드에 올렸습니다...
키보드 인식이 안되는 문제 해결 방법 좀 알려 주세요..
수고 하세요
