도와주세요!!
2004.04.15 23:26:57 (*.138.225.52)
7678
I2C을 SETUP후 KRNEL을 RUN하면은 아래와 같이 PRINT 됩니다.
enable_irq(11) unbalanced from c0098420 문구가 문제인거 같은데
알수가 없네요
환경은 X5 B.D에 PS2 B.D을탑재되어 있읍니다.
참 그리고 PS2 D.B에 있는 SMD 인더턴스 100uH는 어디서 구했는지
알고싶습니다.
그런 정사각형 TYPE은 구하기가 어렵더군요.. 알려주세요
Starting kswapd
I2C: PXA algorithm module loaded.
enable_irq(11) unbalanced from c0098420
I2C: Adding PXA-I2C-Adapter.
i2c-dev.o: Registered 'PXA-I2C-Adapter' as minor 0
I2C: Scanning bus (1a)
I2C: Successfully added bus
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0x0000 (irq = 15) is a PXA UART
ttyS01 at 0x0000 (irq = 14) is a PXA UART
ttyS02 at 0x0000 (irq = 13) is a PXA UART
mk712 device OK!
eth0: cs8900 rev J Base 0xF1000300<6>, IRQ 44, MAC 00:A0:50:F0:20:20
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
SSP audio for EZ-X5 initialized
WM8721 DAC Initialized for EZ-X5
I2C: WM8721 driver successfully loaded
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB 3,3V)
Creating 3 MTD partitions on "NAND 64MB 3,3V":
0x00000000-0x00100000 : "EZ-X5 Kernel partition"
0x00100000-0x00400000 : "EZ-X5 Ramdisk partition"
0x00400000-0x04000000 : "EZ-X5 Data partition 0"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
FAT: bogus logical sector size 0
yaffs: dev is 256 name is "01:00"
VFS: Mounted root (yaffs filesystem) readonly.
Freeing init memory: 44K
Warning: unable to open an initial console.
Kernel panic: No init found. Try passing init= option to kernel
enable_irq(11) unbalanced from c0098420 문구가 문제인거 같은데
알수가 없네요
환경은 X5 B.D에 PS2 B.D을탑재되어 있읍니다.
참 그리고 PS2 D.B에 있는 SMD 인더턴스 100uH는 어디서 구했는지
알고싶습니다.
그런 정사각형 TYPE은 구하기가 어렵더군요.. 알려주세요
Starting kswapd
I2C: PXA algorithm module loaded.
enable_irq(11) unbalanced from c0098420
I2C: Adding PXA-I2C-Adapter.
i2c-dev.o: Registered 'PXA-I2C-Adapter' as minor 0
I2C: Scanning bus (1a)
I2C: Successfully added bus
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0x0000 (irq = 15) is a PXA UART
ttyS01 at 0x0000 (irq = 14) is a PXA UART
ttyS02 at 0x0000 (irq = 13) is a PXA UART
mk712 device OK!
eth0: cs8900 rev J Base 0xF1000300<6>, IRQ 44, MAC 00:A0:50:F0:20:20
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
SSP audio for EZ-X5 initialized
WM8721 DAC Initialized for EZ-X5
I2C: WM8721 driver successfully loaded
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB 3,3V)
Creating 3 MTD partitions on "NAND 64MB 3,3V":
0x00000000-0x00100000 : "EZ-X5 Kernel partition"
0x00100000-0x00400000 : "EZ-X5 Ramdisk partition"
0x00400000-0x04000000 : "EZ-X5 Data partition 0"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
FAT: bogus logical sector size 0
yaffs: dev is 256 name is "01:00"
VFS: Mounted root (yaffs filesystem) readonly.
Freeing init memory: 44K
Warning: unable to open an initial console.
Kernel panic: No init found. Try passing init= option to kernel
