도와주세요!!
2006.02.17 18:16:44 (*.230.15.222)
6613
안녕하세요.
ps2 키보드를 꽃아놓은 상태로 부팅하셨나요?
만약 그랬다면 보드를 보내주세요.
확인을 해봐야 할꺼 같네요.
>안녕하세요?
>EZ-PI 보드를 사용해서 키보드를 사용하려구 하는데요.
>키보드가 전혀 동작을 하지 않습니다.
>
>무슨 문제일까요?
>
>아 그리고.. VT82C42의 8M 크리스탈을 오실로스코프로 찍어봤는데요.
>발진이 안되고 있는데요. 이게 정상적인 것인지 알고 싶습니다.
>
>아래 부팅 메세지입니다.
>그럼.. 답변 부탁드립니다. 수고하세요^^
>
>Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar].....
>Copy Kernel Image .....
>Copy Ramdisk Image .....
>Starting kernel [MARCH 303]...
>Uncompressing Linux.......................................................... do
>ne, booting the kernel.
>Linux version 2.4.19-rmk7-pxa1 (root@solnae.com) (gcc version 3.2.1) #439 2006.
>02. 17. (금) 15:26:37 KST
>CPU: XScale-PXA255 revision 6
>Machine: WWW.FALINUX.COM EZ-X5 for PXA255 Board
>Ignoring unrecognised tag 0x00000000
>Memory clock: 99.53MHz (*27)
>Run Mode clock: 398.13MHz (*4)
>Turbo Mode clock: 398.13MHz (*1.0, inactive)
>On node 0 totalpages: 16384
>zone(0): 16384 pages.
>zone(1): 0 pages.
>zone(2): 0 pages.
>Kernel command line: console=tty1 console=ttySA0, 152000 initrd=0xa0800000,5M r
>oot=/dev/ram ramdisk=12288 console=ttyS02,115200 ip0=192.168.1.24 nandparts=1,5
>,58 arch=EZ-X5
>Console: colour dummy device 80x30
>Calibrating delay loop... 397.31 BogoMIPS
>Memory: 64MB = 64MB total
>Memory: 57720KB available (1438K code, 437K data, 68K init)
>Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
>Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
>Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
>Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
>Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
>POSIX conformance testing by UNIFIX
>Linux NET4.0 for Linux 2.4
>Based upon Swansea University Computer Society NET3.039
>Initializing RT netlink socket
>Using PXA255 frequency points.
>Registering CPU frequency change support.
>CPU clock: 398.131 MHz (99.000-400.000 MHz)
>Starting kswapd
>Journalled Block Device driver loaded
>I2C: PXA algorithm module loaded.
>I2C: Adding PXA-I2C-Adapter.
>i2c-dev.o: Registered 'PXA-I2C-Adapter' as minor 0
>I2C: Scanning bus (68)
>I2C: Successfully added bus
>Console: switching to colour frame buffer device 80x30
>LCD resolution 640x480
>initialize_kbd: Keyboard failed self test
>PS2 Keyboard base:0xf1100000, irq:31 (gpio-8)
>pty: 256 Unix98 ptys configured
>keyboard: Timeout - AT keyboard not present?(ed)
>keyboard: Timeout - AT keyboard not present?(f4)
>Serial driver version 5.05c (2001-07-08) with no serial options enabled
>ttyS00 at 0x0000 (irq = 15) is a PXA UART
>ttyS01 at 0x0000 (irq = 14) is a PXA UART
>ttyS02 at 0x0000 (irq = 13) is a PXA UART
>mk712 device OK!
>I2C: DS1307 RTC driver successfully loaded
>eth0: cs8900 rev K Base 0xF1000300<6>, IRQ 44, MAC 00:A2:55:F2:26:25
>RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
>loop: loaded (max 8 devices)
>Linux video capture interface: v1.00
>ac97_codec: AC97 Audio codec, id: 0x4352:0x5973 (Cirrus Logic CS4202)
>NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB 3,3V)
>Creating 3 MTD partitions on "NAND 64MB 3,3V":
>0x00000000-0x00100000 : "EZ-X5 Kernel partition"
>0x00100000-0x00600000 : "EZ-X5 Ramdisk partition"
>0x00600000-0x04000000 : "EZ-X5 Data partition 0"
>usb.c: registered new driver usbdevfs
>usb.c: registered new driver hub
>usb.c: new USB bus registered, assigned bus number 1
>host/hc_sl811.c: USB SL811 at f2000000, addr2 = f2000004, IRQ 35
>hub.c: USB hub found
>hub.c: 1 port detected
>mice: PS/2 mouse device common for all mice
>NET4: Linux TCP/IP 1.0 for NET4.0
>IP Protocols: ICMP, UDP, TCP
>IP: routing cache hash table of 512 buckets, 4Kbytes
>TCP: Hash tables configured (established 4096 bind 8192)
>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
>RAMDISK: Compressed image found at block 0
>Freeing initrd memory: 5120K
>VFS: Mounted root (ext2 filesystem) readonly.
>Freeing init memory: 68K
>INIT: version 2.84 booting
>INIT: Entering runlevel: 3
>yaffs: dev is 7938 name is "1f:02"
>SIOCADDRT: Network is unreachable
>Starting system logger: syslogd
>Starting INET services: inetd
>
ps2 키보드를 꽃아놓은 상태로 부팅하셨나요?
만약 그랬다면 보드를 보내주세요.
확인을 해봐야 할꺼 같네요.
>안녕하세요?
>EZ-PI 보드를 사용해서 키보드를 사용하려구 하는데요.
>키보드가 전혀 동작을 하지 않습니다.
>
>무슨 문제일까요?
>
>아 그리고.. VT82C42의 8M 크리스탈을 오실로스코프로 찍어봤는데요.
>발진이 안되고 있는데요. 이게 정상적인 것인지 알고 싶습니다.
>
>아래 부팅 메세지입니다.
>그럼.. 답변 부탁드립니다. 수고하세요^^
>
>Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar].....
>Copy Kernel Image .....
>Copy Ramdisk Image .....
>Starting kernel [MARCH 303]...
>Uncompressing Linux.......................................................... do
>ne, booting the kernel.
>Linux version 2.4.19-rmk7-pxa1 (root@solnae.com) (gcc version 3.2.1) #439 2006.
>02. 17. (금) 15:26:37 KST
>CPU: XScale-PXA255 revision 6
>Machine: WWW.FALINUX.COM EZ-X5 for PXA255 Board
>Ignoring unrecognised tag 0x00000000
>Memory clock: 99.53MHz (*27)
>Run Mode clock: 398.13MHz (*4)
>Turbo Mode clock: 398.13MHz (*1.0, inactive)
>On node 0 totalpages: 16384
>zone(0): 16384 pages.
>zone(1): 0 pages.
>zone(2): 0 pages.
>Kernel command line: console=tty1 console=ttySA0, 152000 initrd=0xa0800000,5M r
>oot=/dev/ram ramdisk=12288 console=ttyS02,115200 ip0=192.168.1.24 nandparts=1,5
>,58 arch=EZ-X5
>Console: colour dummy device 80x30
>Calibrating delay loop... 397.31 BogoMIPS
>Memory: 64MB = 64MB total
>Memory: 57720KB available (1438K code, 437K data, 68K init)
>Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
>Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
>Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
>Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
>Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
>POSIX conformance testing by UNIFIX
>Linux NET4.0 for Linux 2.4
>Based upon Swansea University Computer Society NET3.039
>Initializing RT netlink socket
>Using PXA255 frequency points.
>Registering CPU frequency change support.
>CPU clock: 398.131 MHz (99.000-400.000 MHz)
>Starting kswapd
>Journalled Block Device driver loaded
>I2C: PXA algorithm module loaded.
>I2C: Adding PXA-I2C-Adapter.
>i2c-dev.o: Registered 'PXA-I2C-Adapter' as minor 0
>I2C: Scanning bus (68)
>I2C: Successfully added bus
>Console: switching to colour frame buffer device 80x30
>LCD resolution 640x480
>initialize_kbd: Keyboard failed self test
>PS2 Keyboard base:0xf1100000, irq:31 (gpio-8)
>pty: 256 Unix98 ptys configured
>keyboard: Timeout - AT keyboard not present?(ed)
>keyboard: Timeout - AT keyboard not present?(f4)
>Serial driver version 5.05c (2001-07-08) with no serial options enabled
>ttyS00 at 0x0000 (irq = 15) is a PXA UART
>ttyS01 at 0x0000 (irq = 14) is a PXA UART
>ttyS02 at 0x0000 (irq = 13) is a PXA UART
>mk712 device OK!
>I2C: DS1307 RTC driver successfully loaded
>eth0: cs8900 rev K Base 0xF1000300<6>, IRQ 44, MAC 00:A2:55:F2:26:25
>RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
>loop: loaded (max 8 devices)
>Linux video capture interface: v1.00
>ac97_codec: AC97 Audio codec, id: 0x4352:0x5973 (Cirrus Logic CS4202)
>NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MB 3,3V)
>Creating 3 MTD partitions on "NAND 64MB 3,3V":
>0x00000000-0x00100000 : "EZ-X5 Kernel partition"
>0x00100000-0x00600000 : "EZ-X5 Ramdisk partition"
>0x00600000-0x04000000 : "EZ-X5 Data partition 0"
>usb.c: registered new driver usbdevfs
>usb.c: registered new driver hub
>usb.c: new USB bus registered, assigned bus number 1
>host/hc_sl811.c: USB SL811 at f2000000, addr2 = f2000004, IRQ 35
>hub.c: USB hub found
>hub.c: 1 port detected
>mice: PS/2 mouse device common for all mice
>NET4: Linux TCP/IP 1.0 for NET4.0
>IP Protocols: ICMP, UDP, TCP
>IP: routing cache hash table of 512 buckets, 4Kbytes
>TCP: Hash tables configured (established 4096 bind 8192)
>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
>RAMDISK: Compressed image found at block 0
>Freeing initrd memory: 5120K
>VFS: Mounted root (ext2 filesystem) readonly.
>Freeing init memory: 68K
>INIT: version 2.84 booting
>INIT: Entering runlevel: 3
>yaffs: dev is 7938 name is "1f:02"
>SIOCADDRT: Network is unreachable
>Starting system logger: syslogd
>Starting INET services: inetd
>
