도와주세요!!
2007.05.29 14:38:46 (*.125.112.214)
6772
안녕하십니까??
저는 LINUXredhat9.0으로 EZ-X5 부트로더를 올리고 있습니다.
이상한 것이 JTAG으로 부트로더 1.1버전은 써지는데 1.8버전은 써지지가 않습니다. 물론 새로나온 New-flashRomWrite와 개구리버전 두개 다 사용해 보았습니다.
그래서 일단 1.1버전의 부트로더를 올리고 RAMDISK를 올리는데 8M짜리는 올라가면 실행됩니다. 하지만 10M짜리 ramdisk.x5-10M를 올리고 커널을 올려서 EZ-X5(PI board 추가)를 실행시키면 아래와 같은 문제가 발생합니다. 아무리 Q&A를 찾아봐도 뚜렷한 원인이나 해결책이 보이지 않네요. 답변 좀 부탁드리겠습니다.
^^;
1. MAC Address
TCP: Hash tables configured (established 2048 bind 4096)AL IP [192.168.10.155
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.0.0.0.0]
4.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.comage file name [zImage.x5]
yaffs: dev is 256 name is "01:00" [ramdisk.x5.gz]
VFS: Mounted root (yaffs filesystem) readonly.le
A. Autoboot wait ti
Freeing init memory: 64K
B. Bo
Warning: unable to open an initial console.
R. Copy Ramdisk [Y/N] [Y]
Kernel panic: No init found. Try passing ecture Number
NAND Chip Check ...........................00000,5M root=/dev/ram ramdisk=10240]
Detect SAMSUNG [ec:76] 64MByte
Newvalue :
BAD BLOCK SCAN -> Kernel, Ramdisk Bad Block [0]
CS8900 Init...............C Address [00:a
CS8900 Mac Address : [00 A2 55 F2 26 25]
2. LOCAL IP
CS8900 DECTECT VALUE : [00003000:00003000]
3. HOST IP
CS8900 INIT OK!!!
...
5. zImage file nam
Linux version 2.4.19-rmk7-pxa1 (root@localhost.localdomain) (gcc version 3.2.1)
Program by You Young-cha
#422 2007. 05. 28. (월) 00:20:47 KST
K. Ke
CPU: XScale-PXA255 revision 6
Machine: WWW.FALINUX.COM EZ-X5 for PXA255 Boardm ramdis
Ignoring unrecognised tag 0x00000000d Default
NAND
Memory clock: 99.53MHz (*27).....
Run Mode clock: 398.13MHz (*4) 0. Exit
Select >
Turbo Mode clock: 398.13MHz (*1.0, inactive)d Address... 0x00020000
On node 0 totalpOC
Memory: 30696KB available (1322K code, 287K data, 64K init)
4. Host tftp directory []
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
5. zImage file n
B. Boot M
Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Ramdisk [Y/N] [Y]ux version 2.4.19-rmk7-pxa1 (ro
Mount-cache hash table entries: 512 (order: 0, 4096 bytes). Architecture Number [303]sion 3.2.1)
Linux NET4.0 for Linux 2.4
P. Apply & Exit
Based upon Swansea University Computer Society NET3.039
0. Exit
Select >>]0
Initializing RT netlink sockets [00:a2:55:f2:26:2
Using PXA255 frequency points.
Registering CPU frequency change support.
2. LOCAL IP [192.168
CPU clock: 398.131 MHz (99.000-400.000 MHz)
3. HOST IP
Starting kswapd
Console: switching to colour frame buffer device 80x30
A. Autoboot wait time [3]
0x00100000-0x00400000 : "EZ-X5 Ramdisk partition"
0x00400000-0x04000000 : "EZ-X5 Data partition 0"
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/sl811.c: v0.30 : Sl811 USB Host Controller Alternate Driver
usb.c: new USB bus registered, assigned bus number 1
host/sl811.c: USB SL811 at f2000000,f2000004, IRQ 35
hub.c: USB hub found
hub.c: 1 port detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
yaffs: dev is 256 name is "01:00"
VFS: Mounted root (yaffs filesystem) readonly.
Freeing init memory: 64K
Warning: unable to open an initial console.
Kernel panic: No init found. Try passing init= option to kernel.
저는 LINUXredhat9.0으로 EZ-X5 부트로더를 올리고 있습니다.
이상한 것이 JTAG으로 부트로더 1.1버전은 써지는데 1.8버전은 써지지가 않습니다. 물론 새로나온 New-flashRomWrite와 개구리버전 두개 다 사용해 보았습니다.
그래서 일단 1.1버전의 부트로더를 올리고 RAMDISK를 올리는데 8M짜리는 올라가면 실행됩니다. 하지만 10M짜리 ramdisk.x5-10M를 올리고 커널을 올려서 EZ-X5(PI board 추가)를 실행시키면 아래와 같은 문제가 발생합니다. 아무리 Q&A를 찾아봐도 뚜렷한 원인이나 해결책이 보이지 않네요. 답변 좀 부탁드리겠습니다.
^^;
1. MAC Address
TCP: Hash tables configured (established 2048 bind 4096)AL IP [192.168.10.155
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.0.0.0.0]
4.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.comage file name [zImage.x5]
yaffs: dev is 256 name is "01:00" [ramdisk.x5.gz]
VFS: Mounted root (yaffs filesystem) readonly.le
A. Autoboot wait ti
Freeing init memory: 64K
B. Bo
Warning: unable to open an initial console.
R. Copy Ramdisk [Y/N] [Y]
Kernel panic: No init found. Try passing ecture Number
NAND Chip Check ...........................00000,5M root=/dev/ram ramdisk=10240]
Detect SAMSUNG [ec:76] 64MByte
Newvalue :
BAD BLOCK SCAN -> Kernel, Ramdisk Bad Block [0]
CS8900 Init...............C Address [00:a
CS8900 Mac Address : [00 A2 55 F2 26 25]
2. LOCAL IP
CS8900 DECTECT VALUE : [00003000:00003000]
3. HOST IP
CS8900 INIT OK!!!
...
5. zImage file nam
Linux version 2.4.19-rmk7-pxa1 (root@localhost.localdomain) (gcc version 3.2.1)
Program by You Young-cha
#422 2007. 05. 28. (월) 00:20:47 KST
K. Ke
CPU: XScale-PXA255 revision 6
Machine: WWW.FALINUX.COM EZ-X5 for PXA255 Boardm ramdis
Ignoring unrecognised tag 0x00000000d Default
NAND
Memory clock: 99.53MHz (*27).....
Run Mode clock: 398.13MHz (*4) 0. Exit
Select >
Turbo Mode clock: 398.13MHz (*1.0, inactive)d Address... 0x00020000
On node 0 totalpOC
Memory: 30696KB available (1322K code, 287K data, 64K init)
4. Host tftp directory []
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
5. zImage file n
B. Boot M
Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Ramdisk [Y/N] [Y]ux version 2.4.19-rmk7-pxa1 (ro
Mount-cache hash table entries: 512 (order: 0, 4096 bytes). Architecture Number [303]sion 3.2.1)
Linux NET4.0 for Linux 2.4
P. Apply & Exit
Based upon Swansea University Computer Society NET3.039
0. Exit
Select >>]0
Initializing RT netlink sockets [00:a2:55:f2:26:2
Using PXA255 frequency points.
Registering CPU frequency change support.
2. LOCAL IP [192.168
CPU clock: 398.131 MHz (99.000-400.000 MHz)
3. HOST IP
Starting kswapd
Console: switching to colour frame buffer device 80x30
A. Autoboot wait time [3]
0x00100000-0x00400000 : "EZ-X5 Ramdisk partition"
0x00400000-0x04000000 : "EZ-X5 Data partition 0"
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/sl811.c: v0.30 : Sl811 USB Host Controller Alternate Driver
usb.c: new USB bus registered, assigned bus number 1
host/sl811.c: USB SL811 at f2000000,f2000004, IRQ 35
hub.c: USB hub found
hub.c: 1 port detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
yaffs: dev is 256 name is "01:00"
VFS: Mounted root (yaffs filesystem) readonly.
Freeing init memory: 64K
Warning: unable to open an initial console.
Kernel panic: No init found. Try passing init= option to kernel.
