도와주세요!!
글 수 15,339
2007.09.12 21:34:38 (*.82.68.226)
6671
안녕하세요..
K. Kernel CMD 1st [initrd=0xa0800000,5M root=/dev/ram ramdisk=12288]
M. Kernel CMD 2nd [console=ttyPXA2, 115200]
에서 console=ttyPXA2,115200 로 한번 해 보세요.. 중간에 공백이 있어서 그럴 수도 있습니다..
그럼 수고하세요..
> 커널 2.6.11까지 올렸는데 시리얼로 메시지 출력이 깨집니다.
>시리얼 콘솔 설정이 잘못된거 같습니다..
>
>=>부트로더옵션
> K. Kernel CMD 1st [initrd=0xa0800000,5M root=/dev/ram ramdisk=12288]
> M. Kernel CMD 2nd [console=ttyPXA2, 115200]
>==>menuconfig 옵션
>
>character devices-->
> x falinux arch-driver support ---> x x
> x x [ ] Non-standard serial port support x x
> x x Serial drivers ---> x x
> x x [*] Legacy (BSD) PTY support x x
> x x (256) Maximum number of legacy PTY in use x x
> x x IPMI ---> x x
> x x Watchdog Cards ---> x x
> x x < > /dev/nvram support x x
> x x < > Enhanced Real Time Clock Support x x
> x x < > Double Talk PC internal speech card support x x
> x x < > Siemens R3964 line discipline x x
> x x Ftape, the floppy tape device driver ---> x x
> x x < > Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) x x
> x x < > RAW driver (/dev/raw/rawN) (OBSOLETE) x x
>
>
>Serial Driver ->
> x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
> x x <*> 8250/16550 and compatible serial support x x
> x x [*] Console on 8250/16550 and compatible serial port x x
> x x (4) Maximum number of non-legacy 8250/16550 serial ports x x
> x x [ ] Extended 8250/16550 serial driver options x x
> x x --- Non-8250 serial port support x x
> x x [*] PXA serial port support x x
> x x [*] Console on PXA serial port x x
>
>
>결과..
>
>Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar].
>Copy Kernel Image .....
>Copy Ramdisk Image .....
>Starting kernel [MARCH 785]...
>Uncompressing Linux....................................................................................... done, booting the kernel.
>???p8梟~薛?형
K. Kernel CMD 1st [initrd=0xa0800000,5M root=/dev/ram ramdisk=12288]
M. Kernel CMD 2nd [console=ttyPXA2, 115200]
에서 console=ttyPXA2,115200 로 한번 해 보세요.. 중간에 공백이 있어서 그럴 수도 있습니다..
그럼 수고하세요..
> 커널 2.6.11까지 올렸는데 시리얼로 메시지 출력이 깨집니다.
>시리얼 콘솔 설정이 잘못된거 같습니다..
>
>=>부트로더옵션
> K. Kernel CMD 1st [initrd=0xa0800000,5M root=/dev/ram ramdisk=12288]
> M. Kernel CMD 2nd [console=ttyPXA2, 115200]
>==>menuconfig 옵션
>
>character devices-->
> x falinux arch-driver support ---> x x
> x x [ ] Non-standard serial port support x x
> x x Serial drivers ---> x x
> x x [*] Legacy (BSD) PTY support x x
> x x (256) Maximum number of legacy PTY in use x x
> x x IPMI ---> x x
> x x Watchdog Cards ---> x x
> x x < > /dev/nvram support x x
> x x < > Enhanced Real Time Clock Support x x
> x x < > Double Talk PC internal speech card support x x
> x x < > Siemens R3964 line discipline x x
> x x Ftape, the floppy tape device driver ---> x x
> x x < > Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) x x
> x x < > RAW driver (/dev/raw/rawN) (OBSOLETE) x x
>
>
>Serial Driver ->
> x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
> x x <*> 8250/16550 and compatible serial support x x
> x x [*] Console on 8250/16550 and compatible serial port x x
> x x (4) Maximum number of non-legacy 8250/16550 serial ports x x
> x x [ ] Extended 8250/16550 serial driver options x x
> x x --- Non-8250 serial port support x x
> x x [*] PXA serial port support x x
> x x [*] Console on PXA serial port x x
>
>
>결과..
>
>Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar].
>Copy Kernel Image .....
>Copy Ramdisk Image .....
>Starting kernel [MARCH 785]...
>Uncompressing Linux....................................................................................... done, booting the kernel.
>???p8梟~薛?형
NAND플래시를 못찾는문제가 있어서 다음질문으로 남깁니다..