여기 까지 오기가 어렵네요... 헉헉

 

다름이 아니오라  제가 2.4 버젼을 가지고 있어서 타켓보드를 2.6으로 업글 하려고 합니다.

 

강좌 팁에 보면 .. EZ-X5에 커널 2.6으로 업글 하기 를 참조 했습니다.

남들처럼 ... 잘 되지 않아서 질문 드립니다.

 

자료 시 정보 를 기준으로

 

Uncompressing Linux.............................................................
.................................................. done, booting the kernel.
하고  더이상 진행이 되지 않습니다...

참고로 이미지는 게시판에 걸려 있는 정보를 그냥 사용 했습니다.

조언 바랍니다.

X5 사용자  --- ㅠ.ㅠ

 

 

작업이력 ....

-----------------------------------------------------------------------------------------

아래와 같이  ...

WELCOME EZBOOT V2.3.04 (FALINUX Co.,Ltd) ......PXA255(EZ-X5) (398MHz)
Program by You Young-chang, Oh Jae-Kyong, Jang Hyung-Gi
Last Modify Mar  3 2009

  Detect EON29LV160_B Flash : vid=7F pid=2249
  SIZE 16-Mbits [2048-Kbytes]

  Detect Samsung NAND 64M 3.3V 8-bit Flash : vid=EC pid=76
  SIZE 64-Mbytes (page=512, block=16K)

  LCD setup 640x480
 ... not supported part_nr=2
  clear lcd .....

Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar]

  CS8900 Init ......
  Mac Address  : [00 FA 07 78 65 05]
  Detect value : [3000:3000]
  Chip ID      : [0E63:000A]

EZBOOT>tfb
 receive ezboot.ez-x5
 tx ARP
 rx ARP
 HOST MAC : 00:14:2A:E9:ED:B6
 HOST  IP : 192.168.10.201
 LOCAL IP : 192.168.10.182
 option [timeout 120 tsize 69612]
 size = 69612

 ...write 69612  complete
 ...verify complete

EZBOOT>
EZBOOT>
EZBOOT>
EZBOOT>
EZBOOT>

WELCOME EZBOOT V2.3.04 (FALINUX Co.,Ltd) ......PXA255(EZ-X5) (398MHz)
Program by You Young-chang, Oh Jae-Kyong, Jang Hyung-Gi
Last Modify Mar  3 2009

  Detect EON29LV160_B Flash : vid=7F pid=2249
  SIZE 16-Mbits [2048-Kbytes]

  Detect Samsung NAND 64M 3.3V 8-bit Flash : vid=EC pid=76
  SIZE 64-Mbytes (page=512, block=16K)

  LCD setup 640x480
 ... not supported part_nr=2
  clear lcd .....

Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar]

  CS8900 Init ......
  Mac Address  : [00 FA 07 78 65 05]
  Detect value : [3000:3000]
  Chip ID      : [0E63:000A]

EZBOOT>set
^^;
   1) mac address            : 00:FA:07:78:65:05
   2) local ip               : 192.168.10.182
   3) local netmask          : 255.255.255.0
   4) local gateway          : 192.168.10.1
   5) server ip              : 192.168.10.201
   6) zImage      file name  : zImage.ez-x5
   7) ram disk    file name  : ramdisk-1.11-16M.gz
   8) boot loader file name  : ezboot.ez-x5
   9) logo image  file name  :
  10) auto execute full name :
  11) autoboot wait time     : 3
  12) copy ramdisk [Y/N]     : Y
  13) arm kernel arch number : 785
  14) nand part (B,C,L,K,R,A): 0,1,0,3,5,55
  15) watchdog  (sec, off=0) : 0
  16) KCMD 1 : mem=64M
  17) KCMD 2 : initrd=0xA0800000,5M root=/dev/ram ramdisk=16384
  18) KCMD 3 : console=ttyPXA2,115200
  19) KCMD 4 : video=ezfb:panel:3
  20) KCMD 5 :
  21) KCMD 6 :

  L)  Load default
      LF) load KCMD2 root=flash
      LR) load KCMD2 root=ramdisk
  M)  generlate Mac address
  S)  Save to flash
  P)  aPply & exit
  Q)  Quit

  Select >> quit

EZBOOT>tfk
 receive zImage.ez-x5
 tx ARP
 rx ARP
 HOST MAC : 00:14:2A:E9:ED:B6
 HOST  IP : 192.168.10.201
 LOCAL IP : 192.168.10.182
 option [timeout 120 tsize 1705688]
 size = 1705688

 ...write 1705688  complete
 ...verify complete

EZBOOT>tfr
 receive ramdisk-1.11-16M.gz
 tx ARP
 rx ARP
 HOST MAC : 00:14:2A:E9:ED:B6
 HOST  IP : 192.168.10.201
 LOCAL IP : 192.168.10.182
 option [timeout 120 tsize 2845940]
 size = 2845940

 ...write 2845940  complete
 ...verify complete

EZBOOT>rst
System Soft Reset.......
EZBOOT>

WELCOME EZBOOT V2.3.04 (FALINUX Co.,Ltd) ......PXA255(EZ-X5) (398MHz)
Program by You Young-chang, Oh Jae-Kyong, Jang Hyung-Gi
Last Modify Mar  3 2009

  Detect EON29LV160_B Flash : vid=7F pid=2249
  SIZE 16-Mbits [2048-Kbytes]

  Detect Samsung NAND 64M 3.3V 8-bit Flash : vid=EC pid=76
  SIZE 64-Mbytes (page=512, block=16K)

  LCD setup 640x480
 ... not supported part_nr=2
  clear lcd .....

Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar]......

Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel [MARCH 785]...
kernel command [EZBOOT mem=64M initrd=0xA0800000,5M root=/dev/ram ramdisk=16384
console=ttyPXA2,115200 video=ezfb:panel:3   ip0=192.168.10.182 mac=00:FA:07:78:6
5:05 netmask=255.255.255.0 gw=192.168.10.1 host=192.168.10.201 nandparts=1,8,55
]
Uncompressing Linux.............................................................
.................................................. done, booting the kernel.


WELCOME EZBOOT V2.3.04 (FALINUX Co.,Ltd) ......PXA255(EZ-X5) (398MHz)
Program by You Young-chang, Oh Jae-Kyong, Jang Hyung-Gi
Last Modify Mar  3 2009

  Detect EON29LV160_B Flash : vid=7F pid=2249
  SIZE 16-Mbits [2048-Kbytes]

  Detect Samsung NAND 64M 3.3V 8-bit Flash : vid=EC pid=76
  SIZE 64-Mbytes (page=512, block=16K)

  LCD setup 640x480
 ... not supported part_nr=2
  clear lcd .....

Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar]......

Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel [MARCH 785]...
kernel command [EZBOOT mem=64M initrd=0xA0800000,5M root=/dev/ram ramdisk=16384
console=ttyPXA2,115200 video=ezfb:panel:3   ip0=192.168.10.182 mac=00:FA:07:78:6
5:05 netmask=255.255.255.0 gw=192.168.10.1 host=192.168.10.201 nandparts=1,8,55
]
Uncompressing Linux.............................................................
.................................................. done, booting the kernel.

 

-------------------------------------------------------------------