WELCOME EZBOOT.X5 V1.7.1-200MHz..........for PXA255
Program by You Young-chang, fooji (FALinux Co.,Ltd)
Last Modify 2004.11.17
Boot Flash Check ......................
  Detect ES29LV400 (BOTTOM)Flash : 22BA
  SIZE 4M-BIT [512Kbyte]
NAND Chip Check .......................
  Detect SAMSUNG [ec:76] 64MByte
  BAD BLOCK SCAN ->  Kernel, Ramdisk Bad Block [0]
CS8900 Init............................
  Mac Address  : [00 A2 55 F2 26 25]
  Detect value : [3000:3000]
  Chip ID      : [0E63:000A]
Quickly Autoboot [ENTER] / Goto BOOT-MENU press [space bar]
Copy Kernel Image .....
Copy Ramdisk Image .....
Starting kernel [MARCH 303]...
Uncompressing Linux............................................................. done, booting the kernel.
 
상위 메세지와 같은 상태로 멈춰있다면 커널 진입이 안된다면
다음 부분을 커널과 램디스를 다운로드 받아 보세요.
==========================================
 F. NAND-Partition MByte   [1:5:58] (kernel:ramdisk:app)
==========================================
 
 
그래도 안된다면 하위에서 밑줄 부분을 다시 확인해 보세요
 

 

 ^^;
  1. MAC Address            [00:a2:55:f2:26:25]
  2. LOCAL IP               [192.168.10.155]
  3. HOST IP                [192.168.10.20]
  4. Host tftp directory    []
  5. zImage      file name  [zImage.x5]
  6. ram disk    file name  [ramdisk.x5-12M.gz]
  7. boot loader file name  [ezboot.x5]
  A. Autoboot wait time     [3]
  B. Boot Menu Key          [ ]
  C. Copy Ramdisk [Y/N]     [Y]
  D. Architecture Number    [303]
  E. Serial FF/BT/ST(0/1/2) [2]
  F. NAND-Partition MByte   [1:5:58] (kernel:ramdisk:app)
  W. Watchdog (sec, off=0)  [0]
 
  K. Kernel CMD 1st [initrd=0xa0800000,5M root=/dev/ram ramdisk=12288]
  M. Kernel CMD 2nd [console=ttyS02,115200]
  N. Kernel CMD 3rd []
  L. Load Default
  P. Apply & Exit
  S. Save
  0. Exit
  Select >>
이 게시물을...